bacnet_stack

Modified the COM port scanner to scan from COM1 to COM99.

2009-05-27 20:15:51 +00:00

2009-08-15 01:56:02 +00:00

adc.c

Per the datasheet, "Beware that if doing a Read-Modify-Write on ADCSRA, a pending interrupt can be disabled." I don't know a good way to do this, but using ADIE seems to not be reliable.

2010-10-22 17:12:30 +00:00

adc.h

Enhanced the ADC to be able to read all channels, and fixed bug in configuration of ADC.

2010-09-21 19:50:16 +00:00

ai.c

Updated demo objects in ports to use new named constants for error return values.

2010-06-12 23:24:01 +00:00

av.c

Added test for a decoding problem where the stack is unable to decode something, and retrofitted into WriteProperty for each of the demo objects by returning an Error, Out of Range.

2010-10-12 01:17:50 +00:00

bacnet.aps

Updated builds for ports/atmega168 (IAR) and for ports/bdk-atxx4-mstp (AVR Studio)

2010-10-07 15:56:35 +00:00

bacnet.c

Refactoring some BDK code. Updating Skip Data state for AT91 port.

2010-09-22 01:13:42 +00:00

bacnet.ewp

Increased CStack size, and reduced APDU size since CStack was getting exceeded.

2010-09-23 14:26:11 +00:00

bacnet.eww

Added example project and workspace for IAR for AVR compiler, and fixed compiler errors and warnings after doing such a deed.

2010-09-07 16:18:55 +00:00

bacnet.h

Refactored test and bacnet into respective files.

2010-07-18 19:08:44 +00:00

bi.c

Updated demo objects in ports to use new named constants for error return values.

2010-06-12 23:24:01 +00:00

bo.c

Added test for a decoding problem where the stack is unable to decode something, and retrofitted into WriteProperty for each of the demo objects by returning an Error, Out of Range.

2010-10-12 01:17:50 +00:00

device.c

Added test for a decoding problem where the stack is unable to decode something, and retrofitted into WriteProperty for each of the demo objects by returning an Error, Out of Range.

2010-10-12 01:17:50 +00:00

dlmstp.c

Added extra sub-state for MS/TP from Addendum 135-2008v. Tested with ports/bdk-atxx4-mstp/ code on the BACnet Development Kit. Clean compile on src/mstp.c, ports/at91sam7s and ports/atmega168, but untested. All other changes were not compiled or tested.

2010-10-07 15:52:45 +00:00

eeprom.c

Corrected EOL (and EOL fixup script)

2010-06-01 19:43:15 +00:00

eeprom.h

Fixed up file indent, comments, and eol-type.

2009-05-13 03:46:02 +00:00

fuses.c

Fixed EOL, indent.

2009-10-24 17:02:59 +00:00

hardware.h

Corrected clock frequency to 18.432MHz to correct baud rate at 115200.

2010-10-04 23:26:25 +00:00

hardware.ods

Updated port for BACnet Development Kit.

2009-05-11 22:32:06 +00:00

iar2gcc.h

Added example project and workspace for IAR for AVR compiler, and fixed compiler errors and warnings after doing such a deed.

2010-09-07 16:18:55 +00:00

init.c

Add clear of MCU status registers at initialization.

2010-09-24 19:38:32 +00:00

init.h

Fixed up file indent, comments, and eol-type.

2009-05-13 03:46:02 +00:00

input.c

Added ifndef to allow overriding of default defines.

2010-09-23 14:25:23 +00:00

input.h

Added more objects to BDK port, and connected AI to ADC7, and BI0..BI4 to PINB0..PINB4. Fixed up some other objects and object API (header files).

2009-06-18 03:58:54 +00:00

led.c

Refactoring some BDK code. Updating Skip Data state for AT91 port.

2010-09-22 01:13:42 +00:00

led.h

Refactoring some BDK code. Updating Skip Data state for AT91 port.

2010-09-22 01:13:42 +00:00

main.c

Refactoring some BDK code. Updating Skip Data state for AT91 port.

2010-09-22 01:13:42 +00:00

Makefile

Change global interrupt disable to timer specific interrupt disable for data protection. Added interrupt disabled around ADC API.

2010-10-22 00:11:25 +00:00

nvdata.h

Fixed up file indent, comments, and eol-type.

2009-05-13 03:46:02 +00:00

PICS.odt

Added WhoHas/I-Have services.

2010-02-12 21:46:11 +00:00

rs485.c

Changed Tturnaround time in MS/TP modules to be a minimum of 2ms, or use a dummy transmit of 4 bytes while the transceiver is disabled. 1ms delay will always give smaller than 1ms of delay due to silence timer tick.

2010-10-18 20:42:26 +00:00

rs485.h

Updated ToDo list.

2010-05-14 12:14:09 +00:00

seeprom.c

removed timeout code

2010-09-23 00:52:41 +00:00

seeprom.h

Fixed up file indent, comments, and eol-type.

2009-05-13 03:46:02 +00:00

serial.c

Added example project and workspace for IAR for AVR compiler, and fixed compiler errors and warnings after doing such a deed.

2010-09-07 16:18:55 +00:00

serial.h

Ran indent script.

2009-07-29 18:06:33 +00:00

stack.c

Fixed EOL and performed standard indentation.

2010-09-16 22:00:47 +00:00

stack.h

Fixed up file indent, comments, and eol-type.

2009-05-13 03:46:02 +00:00

test.c

Reverted seeprom timeout for now. Lowered APDU size in Makefile. Changed stack based text to static buffer.

2010-09-23 00:34:26 +00:00

test.h

Refactored test and bacnet into respective files.

2010-07-18 19:08:44 +00:00

timer2.c

Change global interrupt disable to timer specific interrupt disable for data protection. Added interrupt disabled around ADC API.

2010-10-22 00:11:25 +00:00

timer.c

added comments

2010-10-19 13:22:32 +00:00

timer.h

Updated ToDo list.

2010-05-14 12:14:09 +00:00

watchdog.c

Add clear of MCU status registers at initialization.

2010-09-24 19:38:32 +00:00

watchdog.h

Fixed EOL and performed standard indentation.

2010-09-16 22:00:47 +00:00