db5dea31e7
Compiler fails - missing declaration of Get_Routed_Device_Address().
2010-11-21 17:03:04 +00:00
c69ffaa4a5
Default BAC_ROUTING to 0 if not currently defined to maintain non routing behaviour.
2010-11-18 22:20:32 +00:00
dbb8997b4d
Added routing support for virtual network to more of the handlers and fixed up a couple of typos from the previous changes.
...
Added ReadRange service handler so that trendlogs can be read.
2010-11-18 21:29:11 +00:00
3bb228edf2
Added routing support for virtual network so that source addresses are transmitted when required and the correct object ID is used.
2010-11-17 23:16:24 +00:00
a1eaffccff
Added Get_Routed_Device_Address function
2010-11-17 23:14:07 +00:00
4a137eb8df
Added Get_Routed_Device_Address prototype
2010-11-17 23:12:54 +00:00
b87f53c4b4
Only add in src field if it has a non zero address length
2010-11-17 23:11:32 +00:00
f0fc277650
Added gateway demo project
2010-11-17 23:09:29 +00:00
38d307d780
Added in the full set of objects.
...
Fixed up snprintf to work with MSVC.
Fixed virtual object address initialisation so network and address are initialised.
2010-11-17 23:05:54 +00:00
3d80d1a272
Corrected Multi-State Input and Output object Present_Value and number of states handling after being reminded at the BACnet Plugfest that "The Present_Value property shall always have a value greater than zero."
2010-11-17 08:13:33 +00:00
6319e1a7d9
Good IDE tools can be sooo helpful.
2010-11-16 13:12:23 +00:00
9413ec4da2
Small reediting.
2010-11-13 20:31:37 +00:00
502cbcc2e6
1. In device.c, the Object_Table[] is now extern; it has to be defined by the user application (see demos); only the required BACnet objects have to be included.
...
2. Objects' .h files define macro to be used to initialize Object_Table[].
2010-11-13 19:57:29 +00:00
80185c6a63
Changed lines marked with "dangerous cast" to use memcpy.
2010-11-06 01:27:11 +00:00
d50eb7fef7
In bvlc.c, IP address and port number are always in the network byte order (including FD_Table[] and BBMD_Table[]).
...
The only left hton and ntoh functions are in debug_printf() and test functions.
2010-11-05 19:30:20 +00:00
a639864cc8
In bip.c getter and setter functions of IP address and Port number expect and return values in the network byte order. All ntoh and hton were eliminated from bip.c.
...
All other modules changed to be consistent.
arm7 port left unchanged.
2010-11-04 13:30:26 +00:00
437112cc52
Reverted the BIG_ENDIAN additions as they are not needed since bacint is converting integers in an endian neutral manner.
2010-10-31 19:13:10 +00:00
d6cee12acb
added ms-input.c and trendlog.c to project file
2010-10-30 16:16:05 +00:00
73415f4a5d
Modified to store and use IP addresses and the IP port number in the network byte order.
2010-10-29 17:29:01 +00:00
79b86d3a8c
Corrected for ENDIANNESS.
2010-10-27 19:15:10 +00:00
76260a994d
Fix receive BVLL Forwarded-NPDU message: the received source address is in network data format and it has to be stored in the same format.
...
Note: the encode_ and decode_ functions are broken; they ignore host's endianness.
2010-10-27 14:50:52 +00:00
feb44efb87
Corrected missing REAL len decoding. Thank you, Julien!
2010-10-25 11:44:08 +00:00
0953c8ada6
Per the datasheet, "Beware that if doing a Read-Modify-Write on ADCSRA, a pending interrupt can be disabled." I don't know a good way to do this, but using ADIE seems to not be reliable.
2010-10-22 17:12:30 +00:00
bfaec69757
2010-10-22 14:58:28 +00:00
3b49fb0271
Change global interrupt disable to timer specific interrupt disable for data protection. Added interrupt disabled around ADC API.
2010-10-22 00:11:25 +00:00
2cac9ba528
Corrected printing of array properties.
2010-10-21 20:14:07 +00:00
e77f12d261
Yes, these should be deleted now that the code is moved into the regular library area.
2010-10-21 18:19:58 +00:00
df5197b89c
added comments
2010-10-19 13:22:32 +00:00
57781b40cb
Changed Tturnaround time in MS/TP modules to be a minimum of 2ms, or use a dummy transmit of 4 bytes while the transceiver is disabled. 1ms delay will always give smaller than 1ms of delay due to silence timer tick.
2010-10-18 20:42:26 +00:00
a5f24fa19f
Tweaked the comments for better Doxygen output.
2010-10-13 19:00:57 +00:00
48411b8dbf
Routing functionality complete, and working. (Have not done extensive testing, though.)
...
For building, made it possible to include or exclude the routing functionality with simple changes in the main Makefile and enables in lib/Makefile and include/config.h
The Device object (device.c and .h) was extended to support the virtually routed Devices, with most of the new functions in new file gw_device.c to replace their simpler cousins in device.c.
2010-10-13 15:59:39 +00:00
f934f8add8
Changed bacapp data len function to just decode the len without regard to the storage ability of the internal data structures.
2010-10-13 02:29:55 +00:00
2c3e03256d
Added missing initialization for PFM count.
2010-10-13 00:06:07 +00:00
86dbaf409b
Added handling for bacapp decode value returning error codes.
2010-10-12 03:02:05 +00:00
e9249b5b5e
Added test for a decoding problem where the stack is unable to decode something, and retrofitted into WriteProperty for each of the demo objects by returning an Error, Out of Range.
2010-10-12 01:17:50 +00:00
df2a5ca695
Updated to-do list.
2010-10-08 18:20:38 +00:00
9058fc7f3a
Finished up the Network Layer Message handling (I hope).
...
Simplified the Router Table encoding (just based on DNETs).
2010-10-08 02:50:14 +00:00
478d7aeb41
Working out the sending of Network Layer Messages; trying to refactor the actual sending routines to just one since the beginning, end, and error handling are the same for all types - just the payload is different.
...
For many, need to know what our managed downstream BACnet Network list is, so added that argument.
2010-10-07 21:00:46 +00:00
9efd3465cf
Adding more support for Network Layer Message handling.
2010-10-07 20:56:09 +00:00
8d2560225d
Updated builds for ports/atmega168 (IAR) and for ports/bdk-atxx4-mstp (AVR Studio)
2010-10-07 15:56:35 +00:00
b54218939e
Added extra sub-state for MS/TP from Addendum 135-2008v. Tested with ports/bdk-atxx4-mstp/ code on the BACnet Development Kit. Clean compile on src/mstp.c, ports/at91sam7s and ports/atmega168, but untested. All other changes were not compiled or tested.
2010-10-07 15:52:45 +00:00
23eecbc100
Added more informative error message.
2010-10-06 18:49:52 +00:00
8165d5bb09
Corrected clock frequency to 18.432MHz to correct baud rate at 115200.
2010-10-04 23:26:25 +00:00
cf0f01c5a1
Adding a gateway project to demonstrate routing to a virtual network.
...
The work is not complete yet; this is an interim checkin. Ultimately the device.c file will be merged with the regular one or the deltas will be separated into some other file.
2010-09-29 21:04:00 +00:00
9f4b8e5f19
Adding a handler for routed NPDUs (ie, Network Layer Message handling).
...
The work is not complete yet; this is an interim checkin.
2010-09-29 20:52:51 +00:00
d39d4fded3
More function documentation.
...
Defined a default Hop Count value, and used 15 instead of 255.
2010-09-29 20:29:12 +00:00
e5f5dce995
Added some javadoc-type function comments.
...
Reduced the default hop count from way-big 255 to 15.
2010-09-28 21:05:38 +00:00
44b7e02721
Tweaked the debug building and printing a little - I hope this works OK for everyone. Let me know if not.
...
Tamped down a few warnings.
For the demo/server Makefile, made an either/or choice between executable size optimization (normal) or gdb debug info and no optimization.
2010-09-27 20:27:29 +00:00
d5822ac53a
Add clear of MCU status registers at initialization.
2010-09-24 19:38:32 +00:00
6826688777
Fixed merge problem.
2010-09-24 19:37:43 +00:00
bacpack