We have many tests that explicitly use --optimization-counter-threshold=
flag. We also have a CI builder that uses this flag for all tests.
This is an issue for cases where `kernel-isolate` is not AppJIT'ed,
which is the case for simulators and ia32. Especially in debug builds
this causes a very-very slow time-to main due to JIT'ing the CFE code in
`kernel-isolate` and running flow graph checker etc (in debug mode).
This causes various tests to sporadically hit the timeout limit, become
flaky and require gardening attention.
As workarounds: the actual threshold was modified in tests, status files
were updated to mark tests as Pass,Slow etc.
=> This Cl will make `kernel-isolate` no longer be affected by the
`--optimization-counter-threshold`
=> This should make the cycle times faster on those modes and avoid
flaky timeouts that gardeners constantly have to pay attention to.
TEST=ci
Change-Id: Ia58e807b22f69f924315a43c6764427afe398ee6
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/266683
Reviewed-by: Slava Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Unlike retained size, owned size is a partitioning, so it can be naively summed. This replaces an almost quadratic step with a linear step.
TEST=load a large snapshot, such as from dart2js
Change-Id: I49479f6e17b911965def62e9b44fc202ce6a9b9f
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/265961
Reviewed-by: Derek Xu <derekx@google.com>
For single argument FFI calls:
- reduces trampoline size significantly (up to 50%, 150-170 bytes),
- reduces the compressed size of GPay by 2.5kb on arm64,
- regresses performance on arm64 (up to 2.5%).
For more arguments, percentage-wise size gains and speed regressions
are smaller.
Only applied on arm and arm64, we care about code size for these.
Note: On Raspberry Pie (arm), the performance regression on single-
argument calls regresses up to 30%.
TEST=tests/ffi/*
Design doc: https://go/dart-ffi-outline-state-transitions
Closes: https://github.com/dart-lang/sdk/issues/50094
Change-Id: I8b8d7da45f69be6ac1432b11b695de71e56acfd1
Cq-Include-Trybots: luci.dart.try:vm-precomp-ffi-qemu-linux-release-arm-try,vm-ffi-android-debug-arm64c-try,vm-ffi-android-debug-arm-try,vm-kernel-nnbd-mac-debug-arm64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/262343
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Daco Harkes <dacoharkes@google.com>
The error has not been thrown since Dart 2.0,
where being able to reach the end of a switch case
became a compile-time error.
TEST=Removes tests depending on discontinued behavior.
Change-Id: I76292e7c73f2b3aaf071bbb290e97db493b75477
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/261860
Reviewed-by: Michael Thomsen <mit@google.com>
Commit-Queue: Lasse Nielsen <lrn@google.com>
Auto-Submit: Lasse Nielsen <lrn@google.com>
Reviewed-by: Brian Quinlan <bquinlan@google.com>
This CL makes `FfiNative`s use `DynamicLibrary.process()` lookup if
resolving with the resolver set by `Dart_SetFfiNativeResolver` fails.
Also moves the implementation over from ffi.cc to
ffi_dynamic_library.cc so the implementation can be shared with
`DynamicLibrary.process()`.
Moves the implementation behind non-simulator and non-precompiler.
However, the implementation is tested in vm/cc tests which are in
precompiler mode. So enables the implementation if TESTED is defined.
This CL massages the build files so that TESTED is properly
defined when compiling the runtime for the vm/cc tests, and links
the ole32 symbols on windows for vm/cc tests.
(And some unrelated small cleanup changes here and there.)
TEST=tests/ffi/native_assets/process_test.dart
Change-Id: I25395d381db1d9b4b7a5759171a798a1140a6140
Cq-Include-Trybots: luci.dart.try:vm-kernel-win-debug-x64c-try,vm-kernel-win-debug-x64-try,vm-kernel-nnbd-win-debug-x64-try,vm-kernel-precomp-win-debug-x64c-try,dart-sdk-win-try,vm-kernel-win-release-x64-try,vm-kernel-win-release-ia32-try,vm-kernel-precomp-win-product-x64-try,vm-kernel-reload-linux-debug-x64-try,vm-kernel-reload-rollback-linux-debug-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/264982
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Daco Harkes <dacoharkes@google.com>
This is separate from the other heap verification flags because they cause the scavenger to wait for the old-gen GC to finish, which can mask bugs in failing to apply the incremental barrier.
TEST=ci
Change-Id: Idec5087f316e6d7be9dd27c56ed636ee00d638d4
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/264883
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
This shares patch libraries between vm and wasm.
The shared libraries are those previously shared as parts which
need private access to other patch libraries.
TEST=existing
Cq-Include-Trybots: luci.dart.try:dart2wasm-linux-x64-d8-try
Change-Id: I750a20de5a78362e84b87b2bfe1e5395ca4d3769
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/262341
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Aske Simon Christensen <askesc@google.com>
Commit-Queue: Johnni Winther <johnniwinther@google.com>
To avoid these flags being applied to unexpected build rules, we
separate them out into a separate config that is then pulled in
explicitly in the `dart_precompiled_runtime{,_product}` executable
rules. Only those two executables need the additional empty section:
the product version because it becomes `dartaotruntime` in the SDK
bundle, and the non-product version because some of our tests build
standalone executables using it.
The linker flags were originally removed due to
https://github.com/flutter/flutter/issues/112687.
With the recent removal of bitcode support from Flutter (see
https://github.com/flutter/flutter/issues/107883), I can build
the `ios_release` target locally without any issue.
This also reverts the clang DEPS changes from CL 256208 (again).
TEST=pkg/dartdev/test/commands/compile_test
Bug: https://github.com/dart-lang/sdk/issues/49783
Cq-Include-Trybots: luci.dart.try:analyzer-mac-release-try,dart-sdk-mac-arm64-try,dart-sdk-mac-try,pkg-mac-release-arm64-try,pkg-mac-release-try,vm-kernel-precomp-mac-product-x64-try,vm-kernel-precomp-nnbd-mac-release-arm64-try
Change-Id: Ie46402ec2eeda23109247eb9d7a64935ec2052cb
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/262429
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Tess Strickland <sstrickl@google.com>
Instead of trying to make names assembler-friendly, instead just
quote the symbols names in the assembly output and use user visible
names for function and object symbols.
More specifically:
* This CL changes the symbol name from an assembler-safe version of the
scrubbed name to an assembler-unsafe version of the user visible name
that is then quoted when used in assembly output.
* For code symbols, regular stubs are prefixed with `stub`, allocation
stubs are prefixed with `new` and type testing stubs are prefixed with
`assert type is` (e.g., `stub Await`, `new RegExp`,
`assert type is List<Int>`). Function symbols have no prefix.
* Readonly data symbols begin with the type of the readonly data. If
there's any additional information (e.g., the function name for
objects like `PcDescriptors` when `SNAPSHOT_BACKTRACE` is defined),
that follows the type in parentheses.
* For direct-to-ELF snapshots, we allow symbols to have duplicate names.
Thus, internally we create unique ids for all created symbols and
refactor the ELF and DWARF subsystems to pass and store these ids
instead of the symbol names.
* For assembly output, symbols must have unique names. The namer now
has a `CStringIntMap` that keeps counts of the number of times a
given symbol name has been generated for assembly output. If the
symbol name is in the `CStringIntMap`, then the new count in the map
is added as a suffix to ensure uniqueness.
For example, the first symbol created using the name `_StringBase.[]`
has no suffix. If a second symbol is created using the same name,
the second symbol is instead named `_StringBase.[] (#2)`.
This also happens for read-only objects with additional information if
that additional information is not sufficient to make it unique, and
is added separately from that additional information.
* A further restriction for assembly output is that symbols that begin
with 'L' have special meaning to the assembler. Thus, we keep the
old system of prepending such symbol names with an underscore to
avoid this behavior.
TEST=vm/dart{,_2}/use_add_readonly_data_symbol_flag
Bug: b/248012965
Change-Id: I1b6e876f4fb4f42f4a3b90e03110a34a87a03a7c
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-dwarf-linux-product-x64-try,vm-kernel-precomp-linux-product-x64-try,vm-kernel-precomp-linux-release-x64-try,vm-kernel-precomp-linux-debug-x64-try,vm-kernel-precomp-nnbd-linux-release-x64-try,vm-kernel-precomp-nnbd-mac-release-arm64-try,vm-kernel-precomp-mac-product-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/262242
Reviewed-by: Slava Egorov <vegorov@google.com>
Commit-Queue: Tess Strickland <sstrickl@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Enable concurrent marking for IA32.
This removes the last write barrier relying on different alignment offsets for old and new space.
TEST=ci
Change-Id: Ib1c13124002392cf1c3ec264643325ec471a6918
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/262280
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Alexander Aprelev