This reverts commit 922ea3e9b6 in patchset 1, fix for assertion triggered in https://ci.chromium.org/b/8883214567628884960 in patchset 2, fix for deadlock around symbols table mutex in patchset 4.
Original commit description:
Speed up is achieved by sharing most of the dart code, object store
and class table between isolates in single isolate group. So
instead of bootstrapping isolate from the snapshot, isolate is
initialized by setting pointers to existing data structures already
set up for first isolate, and only few isolate-specific structures (moved
to newly introducted isolate_object_store) are created.
To allow for safe cross-isolate switchable call site, type test cache
mutations additional synchronization via RunWithStoppedMutators(that
relies on safepoints) was added.
Besides switchable call sites, no other mutation to the dart code is
done in AOT, which allows such sharing.
Bug: https://github.com/dart-lang/sdk/issues/37835
Bug: https://github.com/dart-lang/sdk/issues/36097
Change-Id: I655e337198214c9dfacbe76f7852b941b5a7e910
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/143462
Commit-Queue: Alexander Aprelev <aam@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
#if defined(DART_PRECOMPILED_RUNTIME)
#error "AOT runtime should not use compiler sources (including header files)"
#endif // defined(DART_PRECOMPILED_RUNTIME)
Remove #if defined(DART_PRECOMPILED_RUNTIME) from most compiler sources.
Change-Id: Id175c83fdbea38d9d5e1371ff433e3888f2afe8a
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/143523
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Make them form its own source set (libdart_compiler) and completely exclude
them from AOT runtime targets.
Previously we had some inconsistencies, with some files were using
DART_PRECOMPILED_RUNTIME to fully or partially exclude either contents
from their headers or from implementation, while other files did nothing
and relied on linker to throw their contents away.
This change tries to address this inconsistency.
A follow up change would include a check in most compiler headers which
would prohibit to use them while building AOT runtime.
Change-Id: Ief11b11cbc518b301d3e93fce80580a31bbad151
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/142993
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Original revert in patchset 1, fix for deadlock issue in patchset 2: avoid reentrant calls to RunWithStoppedMutator.
Further review comments addressed in successive patchsets.
This reverts commit 8ef508ba36.
Original commit description:
Speed up is achieved by sharing most of the dart code, object store
and class table between isolates in single isolate group. So
instead of bootstrapping isolate from the snapshot, isolate is
initialized by setting pointers to existing data structures already
set up for first isolate, and only few isolate-specific structures (moved
to newly introducted isolate_object_store) are created.
To allow for safe cross-isolate switchable call site, type test cache
mutations additional synchronization via RunWithStoppedMutators(that
relies on safepoints) was added.
Besides switchable call sites, no other mutation to the dart code is
done in AOT, which allows such sharing.
Change-Id: I6a0279d9812020ad7a5c2b7851980b6a29b95b9a
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/143327
Commit-Queue: Alexander Aprelev <aam@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Speed up is achieved by sharing most of the dart code, object store
and class table between isolates in single isolate group. So
instead of bootstrapping isolate from the snapshot, isolate is
initialized by setting pointers to existing data structures already
set up for first isolate, and only few isolate-specific structures (moved
to newly introducted isolate_object_store) are created.
To allow for safe cross-isolate switchable call site, type test cache
mutations additional synchronization via RunWithStoppedMutators(that
relies on safepoints) was added.
Besides switchable call sites, no other mutation to the dart code is
done in AOT, which allows such sharing.
Bug: https://github.com/dart-lang/sdk/issues/37835
Bug: https://github.com/dart-lang/sdk/issues/36097
Change-Id: I64c86525f4ef9cb30567a49a106bfe700355942b
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/136780
Commit-Queue: Alexander Aprelev <aam@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Allocate the canonical true and false objects right after the null
object such that their pointers are the same except for a single bit.
This enables a number of optimizations:
- Test of a bool value becomes a bit test when it is known that the
value is a bool. on ARM64, this bit test can be combined with the
branch.
- Negation of a bool value becomes an xor when it is known that the
value is a bool.
- Load of a bool value becomes an immediate add with the null register
on ARM64.
This is a reland of f8ead09ba2
Change-Id: Iadb2169f80d3731153df3a93772f6142c3197260
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/142375
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Aske Simon Christensen <askesc@google.com>
This reverts commit 87b4848bfc as it broke simarm, simarm64 builds.
Revert "[vm] Distinguish between bool objects by a single bit in their pointers."
This reverts commit f8ead09ba2 being collateral damage for the revert above.
Change-Id: I0a12fe8095566430823c094b294c490b59cb3c39
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/142404
Reviewed-by: Alexander Aprelev <aam@google.com>
Commit-Queue: Alexander Aprelev <aam@google.com>
Allocate the canonical true and false objects right after the null
object such that their pointers are the same except for a single bit.
This enables a number of optimizations:
- Test of a bool value becomes a bit test when it is known that the
value is a bool. on ARM64, this bit test can be combined with the
branch.
- Negation of a bool value becomes an xor when it is known that the
value is a bool.
- Load of a bool value becomes an immediate add with the null register
on ARM64.
Change-Id: I70db024437e0f9cb15c401354e5e35802c354172
Cq-Do-Not-Cancel-Tryjobs: true
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/137100
Commit-Queue: Aske Simon Christensen <askesc@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
So far we relied on our normal Dart tests to exercise and test TTS.
This CL adds concrete TTS unit tests, which directly construct the
values the TTS accepts via the calling convention (instance,
dst_type, instantiator tav, function tav), and allows us to test
* whether TTS handled the type test
* whether TTS was falling back to STC which handled the type test
* whether TTS (and STC) preserve the necessary registers
This CL also gets rid of TMP usage in TTS related code.
This CL also adds documentation about TTS to
runtime/docs/compiler/type_testing_stubs.md.
This CL also fixes two issues:
* handle all-dynamic null vector `as Foo<..., T, ...>`
* compare the actual type parameter value in `as Foo<..., T, ...>`
(instead of using type_class_id>)
There seem to be no major performance changes, some benchmarks change
positive/negative but many of them seem to be bi-modal.
Issue https://github.com/dart-lang/sdk/issues/40964
Issue https://github.com/dart-lang/sdk/issues/40736
Change-Id: Iad41e405fe693c67be6221a18e3dad03cc0a5f24
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/139461
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Use unboxed indices in FFI loads, eliminating extra boxing and a shift for 1-byte loads.
Speeds up Pointer<Int8,Int64,etc> loads/stores by 20-25% in AOT on x64.
This does not use the unboxed indices in TypedData yet, using unboxed in TypedData without making the bounds checks unboxed makes it slower instead of faster.
Issue: https://github.com/dart-lang/sdk/issues/39432
Change-Id: I2521fcd319cf4ed6891622e8a3c8c1924e9b01f3
Cq-Include-Trybots: luci.dart.try:vm-ffi-android-debug-arm-try,vm-ffi-android-debug-arm64-try,app-kernel-linux-debug-x64-try,vm-kernel-linux-debug-ia32-try,vm-kernel-win-debug-x64-try,vm-kernel-win-debug-ia32-try,vm-kernel-precomp-linux-debug-x64-try,vm-dartkb-linux-release-x64-abi-try,vm-kernel-precomp-android-release-arm64-try,vm-kernel-asan-linux-release-x64-try,vm-kernel-linux-release-simarm-try,vm-kernel-linux-release-simarm64-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-obfuscate-linux-release-x64-try,dart-sdk-linux-try,analyzer-analysis-server-linux-try,analyzer-linux-release-try,front-end-linux-release-x64-try,vm-kernel-precomp-win-release-x64-try,vm-kernel-mac-debug-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/137788
Reviewed-by: Martin Kustermann <kustermann@google.com>
Code references other objects via object pools. In bare instructions mode
individual objects pool are merged together into a global object pool,
which means that we no longer can clearly see which objects are
referenced by each individual code object.
This CL adds logic into snapshot writer to include these implicit
references into the snapshot profile. We achieve this by keeping
individual object pools around (but avoiding writing them into the
snapshot itself).
R=sjindel@google.com
Change-Id: I35b48fcfc26c0a8c0b66593139fa7ac8e627da6c
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/136626
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Samir Jindel <sjindel@google.com>
This reduces the instructions sizes of the Flutter benchmarks by between
0.22% and 0.36% (0.24% for Flutter Gallery) and the total sizes by
between 0.15% and 0.23% (0.15% for Flutter Gallery).
Change-Id: I69c0551883d31afcbaad0f592aafcd3115ecb347
Cq-Do-Not-Cancel-Tryjobs: true
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/135904
Commit-Queue: Aske Simon Christensen <askesc@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
> Header files should be self-contained (compile on their own) and end in .h. Non-header files that are meant for inclusion should end in .inc and be used sparingly.
>
> All header files should be self-contained. Users and refactoring tools should not have to adhere to special conditions to include the header. Specifically, a header should have header guards and include all other headers it needs.
This cleans up header files referring to types and functions defined in the files including those header files.
This does not clean up the include guards in xyz_<arch>.h. We have currently 45 such include guards. We can clean that up by moving the #ifdefs from xyz.h to the individual xyz_<arch>.h files. A list of header files which cannot stand on itself is maintained in runtime/tools/run_clang_tidy.dart.
Change-Id: I9ab1fc09056d86e8ac59a80c063a812633cf7c71
Cq-Include-Trybots: luci.dart.try:vm-ffi-android-debug-arm-try,vm-ffi-android-debug-arm64-try,app-kernel-linux-debug-x64-try,vm-kernel-linux-debug-ia32-try,vm-kernel-win-debug-x64-try,vm-kernel-win-debug-ia32-try,vm-kernel-precomp-linux-debug-x64-try,vm-dartkb-linux-release-x64-abi-try,vm-kernel-precomp-android-release-arm64-try,vm-kernel-asan-linux-release-x64-try,vm-kernel-linux-release-simarm-try,vm-kernel-linux-release-simarm64-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-obfuscate-linux-release-x64-try,dart-sdk-linux-try,analyzer-analysis-server-linux-try,analyzer-linux-release-try,front-end-linux-release-x64-try,vm-kernel-precomp-win-release-x64-try,vm-kernel-mac-debug-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/135650
Commit-Queue: Daco Harkes <dacoharkes@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
This reverts commit be38459b98.
Reason for revert: Comments in other pieces of the code state that kMinInt should be able to flow into SubImmediateSetFlags.
Original change's description:
> [vm] Arm Assembler simplify code for SubImmediateSetFlags
>
> See https://dart-review.googlesource.com/c/sdk/+/124136/9/runtime/vm/compiler/assembler/assembler_arm.cc#3203
>
> Change-Id: I8d2a1bb781f22d6aae0e02eacf042a203a44790d
> Cq-Include-Trybots: luci.dart.try:vm-ffi-android-debug-arm-try,vm-ffi-android-product-arm-try,vm-ffi-android-release-arm-try,vm-kernel-linux-release-simarm-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-bare-linux-release-simarm-try,vm-kernel-precomp-linux-debug-simarm_x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm_x64-try
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/134333
> Commit-Queue: Daco Harkes <dacoharkes@google.com>
> Reviewed-by: Martin Kustermann <kustermann@google.com>
TBR=kustermann@google.com,dacoharkes@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: Idb6ec6e55256c3a4894179a844d118a41378a074
Cq-Include-Trybots: luci.dart.try:vm-ffi-android-debug-arm-try, vm-ffi-android-product-arm-try, vm-ffi-android-release-arm-try, vm-kernel-linux-release-simarm-try, vm-kernel-precomp-android-release-arm_x64-try, vm-kernel-precomp-bare-linux-release-simarm-try, vm-kernel-precomp-linux-debug-simarm_x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm_x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/135645
Reviewed-by: Daco Harkes <dacoharkes@google.com>
Commit-Queue: Daco Harkes <dacoharkes@google.com>
Now, when writing an AOT snapshot in bare instructions mode, only
the actual instructions in the RawInstructions payload are serialized
instead of the entire RawInstructions object.
Since there are no longer RawInstructions objects in these AOT
snapshots, we also change how Code objects are serialized. Instead
of just containing a reference to the RawInstructions object, we
serialize two pieces of information: where the instructions
payload for this Code object begins and whether there was a single
entry for the instructions payload. (To save space, the single
entry bit is serialized as the low order bit of the unchecked
offset, which was already being serialized).
While we also need the length of the instructions payload, we
approximate it for all but the last Code object by subtracting
the next Code object's payload start from this Code object's
payload start. For the last Code object, we assume it extends
to the end of the instructions image.
Changes on flutter gallery in release mode:
armv7: instructions size -2.70%, total size -1.73%
armv8: instructions size -6.04%, total size -3.63%
Fixes https://github.com/dart-lang/sdk/issues/38451.
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-release-x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm64-try,vm-kernel-precomp-linux-release-simarm_x64-try,vm-kernel-precomp-android-release-arm64-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-mac-release-simarm64-try,vm-kernel-precomp-win-release-x64-try
Change-Id: Ia0a5c4e5e47c956776dc62503da38ec55a143c04
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/134325
Commit-Queue: Teagan Strickland <sstrickl@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Introduces NativeRepresentation and NativeLocation for the compilation of FFI.
NativeRepresentations are able to express all representations (or types) of the native ABIs we bind to with FFI, this is more representations that than that are used in Dart itself.
NativeLocations are able to express all locations of the native ABIs we bind to with FFI, this is more types of locations than that are used for the Dart calling convention.
See the documentation in the respective files.
These NativeLocations and NativeRepresentations are computed by the NativeCallingConvention and consumed by the Marshaller and Assemblers.
This reenginering is required for go/dart-ffi-by-value, hardfp (Arm S and D fpu registers), and iOS 64 bit (non-word-aligned stack arguments).
In addition, by using the NativeRepresentations we also get slightly reduced code size:
* The tracking of sizes is improved, so less sign/zero-extension operations are required.
* UnboxedWidthExtenderInstr is fully removed, the size extension is done inside the native moves, coalescing moves and size extension when possible.
* BitCastInstr is only used when really needed. This reduces code-size on arm32 softfp.
This fixes the iOS arm64 calling convention, manually tested with https://github.com/flutter/flutter/pull/46078 and https://dart-review.googlesource.com/c/sdk/+/131074.
Fixes: https://github.com/dart-lang/sdk/issues/39637
Issue: https://github.com/dart-lang/sdk/issues/36309
Issue: https://github.com/dart-lang/sdk/issues/36730
Change-Id: I8878bc0f314277bab4ca22f417c6295ecc017720
Cq-Include-Trybots: luci.dart.try:vm-ffi-android-debug-arm-try,vm-ffi-android-debug-arm64-try,app-kernel-linux-debug-x64-try,vm-kernel-linux-debug-ia32-try,vm-kernel-win-debug-x64-try,vm-kernel-win-debug-ia32-try,vm-kernel-precomp-linux-debug-x64-try,vm-dartkb-linux-release-x64-abi-try,vm-kernel-precomp-android-release-arm64-try,vm-kernel-asan-linux-release-x64-try,vm-kernel-linux-release-simarm-try,vm-kernel-linux-release-simarm64-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-obfuscate-linux-release-x64-try,dart-sdk-linux-try,analyzer-analysis-server-linux-try,analyzer-linux-release-try,front-end-linux-release-x64-try,vm-kernel-precomp-win-release-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/129081
Commit-Queue: Daco Harkes <dacoharkes@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
This reverts commit 7475c637c3.
Reason for revert: Breakage on simarm_x64 (and thus arm_x64)
Original change's description:
> [vm/aot] Remove object wrapping of bare instructions for AOT snapshots.
>
> Now, when writing an AOT snapshot in bare instructions mode, only
> the actual instructions in the RawInstructions payload are serialized
> instead of the entire RawInstructions object.
>
> Since there are no longer RawInstructions objects in these AOT
> snapshots, we also change how Code objects are serialized. Instead
> of just containing a reference to the RawInstructions object, we
> serialize two pieces of information: where the instructions
> payload for this Code object begins and whether there was a single
> entry for the instructions payload. (To save space, the single
> entry bit is serialized as the low order bit of the unchecked
> offset, which was already being serialized).
>
> While we also need the length of the instructions payload, we
> approximate it for all but the last Code object by subtracting
> the next Code object's payload start from this Code object's
> payload start. For the last Code object, we assume it extends
> to the end of the instructions image.
>
> Changes on flutter gallery in release mode:
> armv7: instructions size -2.66%, total size -1.68%
> armv8: instructions size -5.81%, total size -3.49%
>
> Fixes https://github.com/dart-lang/sdk/issues/38451.
>
> Change-Id: Ia458e8d99bae18f5c3b6e849df2519027f06f574
> Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-release-x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm64-try,vm-kernel-precomp-linux-release-simarm_x64-try,vm-kernel-precomp-android-release-arm64-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-mac-release-simarm64-try,vm-kernel-precomp-win-release-x64-try
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/131067
> Commit-Queue: Teagan Strickland <sstrickl@google.com>
> Reviewed-by: Martin Kustermann <kustermann@google.com>
TBR=kustermann@google.com,rmacnak@google.com,sstrickl@google.com
Change-Id: If2c8ca6b0993211b2509b275af7ff11a8fa2baa3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-release-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-linux-release-simarm_x64-try, vm-kernel-precomp-android-release-arm64-try, vm-kernel-precomp-android-release-arm_x64-try, vm-kernel-precomp-mac-release-simarm64-try, vm-kernel-precomp-win-release-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/134322
Reviewed-by: Teagan Strickland <sstrickl@google.com>
Commit-Queue: Teagan Strickland <sstrickl@google.com>
Now, when writing an AOT snapshot in bare instructions mode, only
the actual instructions in the RawInstructions payload are serialized
instead of the entire RawInstructions object.
Since there are no longer RawInstructions objects in these AOT
snapshots, we also change how Code objects are serialized. Instead
of just containing a reference to the RawInstructions object, we
serialize two pieces of information: where the instructions
payload for this Code object begins and whether there was a single
entry for the instructions payload. (To save space, the single
entry bit is serialized as the low order bit of the unchecked
offset, which was already being serialized).
While we also need the length of the instructions payload, we
approximate it for all but the last Code object by subtracting
the next Code object's payload start from this Code object's
payload start. For the last Code object, we assume it extends
to the end of the instructions image.
Changes on flutter gallery in release mode:
armv7: instructions size -2.66%, total size -1.68%
armv8: instructions size -5.81%, total size -3.49%
Fixes https://github.com/dart-lang/sdk/issues/38451.
Change-Id: Ia458e8d99bae18f5c3b6e849df2519027f06f574
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-release-x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm64-try,vm-kernel-precomp-linux-release-simarm_x64-try,vm-kernel-precomp-android-release-arm64-try,vm-kernel-precomp-android-release-arm_x64-try,vm-kernel-precomp-mac-release-simarm64-try,vm-kernel-precomp-win-release-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/131067
Commit-Queue: Teagan Strickland <sstrickl@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
This is a Dart-tailored implementation of the "row-displacement
dispatch table" technique for closed-world instance calls:
All interface targets in the program are grouped into selectors such
that all targets that could potentially be called from the same call
site have the same selector (currently just grouped by name).
Each selector is assigned a selector offset such that offset + classid
is unique for all selector/classid combinations where the class
implements the selector.
At every instance call site that has an interface target (i.e. where
the static type of the receiver is not dynamic), the selector offset +
receiver classid is computed and used as index into a global table of
entry points.
If the receiver can be null (as determined by the front-end TFA and the
VM type propagation), a null check is inserted before the call.
An arguments descriptor is provided (only) for selectors that need it
(those which have type parameters or optional/named parameters).
The dispatch table calls don't need the monomorphic entry code, so for
functions that are only called via dispatch table calls (i.e. never
called dynamically), the monomorphic entry code is left out.
Some future improvements to the table dispatch implementation are
mentioned in https://github.com/dart-lang/sdk/issues/40188
The table dispatch flag is disabled by default in this commit. A
separate commit enables the flag.
Change-Id: Ic2911742b4a2c9a8d3bc7df60605454cbe4c0714
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/126648
Commit-Queue: Aske Simon Christensen <askesc@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
This reverts commit 5f81efb4a3.
Reason for revert: 3xH bot is green again.
Original change's description:
> Revert "[vm/aot] Only patch call-sites to monomorphic entry-points when the receiver is proven to be a heap object."
>
> This reverts commit ab2026af45.
>
> Reason for revert: Flutter 3xH is broken on Golem.
>
> Original change's description:
> > [vm/aot] Only patch call-sites to monomorphic entry-points when the receiver is proven to be a heap object.
> >
> > Flutter Gallery ARMv8: -0.8% total, -1.3% instructions
> > Flutter Gallery ARMv7: -0.7% total, -1.2% instructions
> >
> > There are some performance regressions, in four categories:
> >
> > 1. Arithmetic on num types (e.g. MinLib, MaxLib):
> > We believe arithmetic on num types is rare in practice, and can be optimized later
> > by specializing the call-sites.
> >
> > 2. Lack of types (e.g. MeshDecompression, ImagingGaussianBlur, Crypto*):
> > These (and similar benchmarks) are written in a very untyped style, which is not
> > representative of Dart 2 style. We've confirmed that the regressions disappear if
> > the benchmarks are annotated with appropriate types.
> >
> > 3. Megamorphic calls which are specialized in the benchmark (e.g. DeltaBlue):
> > DeltaBlue uses string interpolation in one place, so the toString() method in the
> > string interpolation helper is monomorphic for _Smis. However, in a realistic programs,
> > string interpolation is used much more frequently and with different types, so it's very
> > unlikely that this call would be monomorphic. When string interpolation is removed, there's
> > a remaining 1.3% regression on DeltaBlue which is not yet accounted for.
> >
> > 4. Noisy benchmarks
> > The remaining regressions are on benchmarks which show frequent jitter historically.
> >
> > There are also 1-4% improvements on many benchmarks (Golem's "noise" analysis is hiding
> > many of them, look at the graphs).
> >
> > For the reasons above, we believe the regressions justified by the code size improvement.
> >
> > Change-Id: Ic9b281d4383a6111de9d6f44347976ffa61a6ca6
> > Cq-Include-Trybots:luci.dart.try:vm-kernel-precomp-linux-debug-x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm64-try,vm-kernel-precomp-bare-linux-release-simarm64-try
> > Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/128667
> > Commit-Queue: Samir Jindel <sjindel@google.com>
> > Reviewed-by: Ryan Macnak <rmacnak@google.com>
> > Reviewed-by: Martin Kustermann <kustermann@google.com>
>
> TBR=kustermann@google.com,rmacnak@google.com,alexmarkov@google.com,sjindel@google.com
>
> Change-Id: I411aae4b230f2a08146ad3bf3e7a10aa6592db0e
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-bare-linux-release-simarm64-try
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/131660
> Reviewed-by: Samir Jindel <sjindel@google.com>
> Commit-Queue: Samir Jindel <sjindel@google.com>
TBR=kustermann@google.com,rmacnak@google.com,alexmarkov@google.com,sjindel@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I36e4e9d598033fcc934c2cdf5b061aa11255d3b2
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-bare-linux-release-simarm64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/131837
Reviewed-by: Samir Jindel <sjindel@google.com>
Commit-Queue: Samir Jindel <sjindel@google.com>
This reverts commit ab2026af45.
Reason for revert: Flutter 3xH is broken on Golem.
Original change's description:
> [vm/aot] Only patch call-sites to monomorphic entry-points when the receiver is proven to be a heap object.
>
> Flutter Gallery ARMv8: -0.8% total, -1.3% instructions
> Flutter Gallery ARMv7: -0.7% total, -1.2% instructions
>
> There are some performance regressions, in four categories:
>
> 1. Arithmetic on num types (e.g. MinLib, MaxLib):
> We believe arithmetic on num types is rare in practice, and can be optimized later
> by specializing the call-sites.
>
> 2. Lack of types (e.g. MeshDecompression, ImagingGaussianBlur, Crypto*):
> These (and similar benchmarks) are written in a very untyped style, which is not
> representative of Dart 2 style. We've confirmed that the regressions disappear if
> the benchmarks are annotated with appropriate types.
>
> 3. Megamorphic calls which are specialized in the benchmark (e.g. DeltaBlue):
> DeltaBlue uses string interpolation in one place, so the toString() method in the
> string interpolation helper is monomorphic for _Smis. However, in a realistic programs,
> string interpolation is used much more frequently and with different types, so it's very
> unlikely that this call would be monomorphic. When string interpolation is removed, there's
> a remaining 1.3% regression on DeltaBlue which is not yet accounted for.
>
> 4. Noisy benchmarks
> The remaining regressions are on benchmarks which show frequent jitter historically.
>
> There are also 1-4% improvements on many benchmarks (Golem's "noise" analysis is hiding
> many of them, look at the graphs).
>
> For the reasons above, we believe the regressions justified by the code size improvement.
>
> Change-Id: Ic9b281d4383a6111de9d6f44347976ffa61a6ca6
> Cq-Include-Trybots:luci.dart.try:vm-kernel-precomp-linux-debug-x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm64-try,vm-kernel-precomp-bare-linux-release-simarm64-try
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/128667
> Commit-Queue: Samir Jindel <sjindel@google.com>
> Reviewed-by: Ryan Macnak <rmacnak@google.com>
> Reviewed-by: Martin Kustermann <kustermann@google.com>
TBR=kustermann@google.com,rmacnak@google.com,alexmarkov@google.com,sjindel@google.com
Change-Id: I411aae4b230f2a08146ad3bf3e7a10aa6592db0e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-bare-linux-release-simarm64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/131660
Reviewed-by: Samir Jindel <sjindel@google.com>
Commit-Queue: Samir Jindel <sjindel@google.com>
Flutter Gallery ARMv8: -0.8% total, -1.3% instructions
Flutter Gallery ARMv7: -0.7% total, -1.2% instructions
There are some performance regressions, in four categories:
1. Arithmetic on num types (e.g. MinLib, MaxLib):
We believe arithmetic on num types is rare in practice, and can be optimized later
by specializing the call-sites.
2. Lack of types (e.g. MeshDecompression, ImagingGaussianBlur, Crypto*):
These (and similar benchmarks) are written in a very untyped style, which is not
representative of Dart 2 style. We've confirmed that the regressions disappear if
the benchmarks are annotated with appropriate types.
3. Megamorphic calls which are specialized in the benchmark (e.g. DeltaBlue):
DeltaBlue uses string interpolation in one place, so the toString() method in the
string interpolation helper is monomorphic for _Smis. However, in a realistic programs,
string interpolation is used much more frequently and with different types, so it's very
unlikely that this call would be monomorphic. When string interpolation is removed, there's
a remaining 1.3% regression on DeltaBlue which is not yet accounted for.
4. Noisy benchmarks
The remaining regressions are on benchmarks which show frequent jitter historically.
There are also 1-4% improvements on many benchmarks (Golem's "noise" analysis is hiding
many of them, look at the graphs).
For the reasons above, we believe the regressions justified by the code size improvement.
Change-Id: Ic9b281d4383a6111de9d6f44347976ffa61a6ca6
Cq-Include-Trybots:luci.dart.try:vm-kernel-precomp-linux-debug-x64-try,vm-kernel-precomp-linux-release-simarm-try,vm-kernel-precomp-linux-release-simarm64-try,vm-kernel-precomp-bare-linux-release-simarm64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/128667
Commit-Queue: Samir Jindel <sjindel@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
The pc-relative calls were recorded with pc-offsets pointing to the start of the
call instruction, where as code-based calls were recorded with
pc-offsets pointing to the next instruction (i.e. return address).
This is inconsistent and caused us to hit an assert in
`Code::set_static_calls_target_table`. The assert was benign, but it is
good to maintain the uniqueness guarantee in the static calls table, so
we'll unify the encoding to use offsets to the instruction after the
call in both cases.
Closes https://github.com/dart-lang/sdk/issues/39811
Change-Id: Id0305befd78f09ed0b0e100f39641bca9e764442
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/129717
Reviewed-by: Ben Konyi <bkonyi@google.com>
Commit-Queue: Ben Konyi <bkonyi@google.com>
This CL is responsible for inlining Float32x4 and Float64x2 arithmetic
operations in order to reduce their run-time cost.
Null-checks were required in order to allow the unbox instructions to
be non-speculative.
CheckNullInstr was modified to throw ArgumentError when checking
arguments for those operations.
Change-Id: I18b36d96a36011647480f301eb6dc6bb478f59a1
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/128589
Commit-Queue: Victor Agnez Lima <victoragnez@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Reviewed-by: Samir Jindel <sjindel@google.com>
There's just one case where we can't get the offset for Instructions
from somewhere else, and that's when we reset active_instructions_ to
instructions_ in Code::Enable(). Thus, we add a caching field for the
uncached offset to RawCode, but only when the active_instructions_
field is added (when not running in the precompiled runtime).
We also output the unchecked offset in snapshots for Code objects so
we can recalculate the entry point cache on loading. (For full JIT
snapshots, we output both the cached offset and the offset for
active_instructions_.)
Bug: https://github.com/dart-lang/sdk/issues/38451
Change-Id: I78572ec83d1574b00820df148bccb57e5c79eaaa
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/125400
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Teagan Strickland <sstrickl@google.com>
We eagerly add objects into the global object pool while generating
code. However code generation can be aborted and retried at any point
due to various reasons (branch distance or speculative inlining). Such
bailouts and retries would leave dead global pool entries behind.
This CL avoids this by switching to a accumulate&commit scheme for
populating global object pool.
This solution is not entirely clean because we sometimes perform
nested code generation (i.e. to create allocation stubs) which
means that we can't always commit accumulated entries into the
global pool at the same indices as we expected them to be - meaning
that commit can fail and we have to retry compilation.
We try to minimize amount of retries by pregenerating some stubs
ahead of the main code generation.
Change-Id: I5bd3f70272cf49189b754f3a9a2c31d2e6165353
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/126343
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Alexander Markov