- Updated GatewayModbusConfig to allow uart_port and pin values to be -1, indicating an unconfigured state.
- Enhanced GatewayNetworkService to support an additional setup AP button with configurable GPIO and active low settings.
- Refactored boot button configuration logic to reduce redundancy and improve clarity.
- Introduced a new method for handling GPIO input configuration.
- Improved boot button task loop to handle both boot and setup AP buttons more effectively.
- Added programming mode functionality to EtsDeviceRuntime, allowing toggling and querying of the programming state.
- Implemented memory checks to avoid unnecessary reads in EtsDeviceRuntime.
- Enhanced security storage to derive factory FDSK from the device's serial number and store it in NVS.
- Updated factory FDSK loading logic to ensure proper key generation and storage.
Signed-off-by: Tony <tonylu@tony-cloud.com>
- Introduced configuration options for wired Ethernet support in Kconfig and sdkconfig.
- Implemented Ethernet initialization and event handling in GatewayNetworkService.
- Enhanced app_main to manage Ethernet alongside Wi-Fi.
- Updated GatewayRuntime to store Ethernet information.
- Modified CMakeLists and include files to accommodate new Ethernet dependencies.
- Ensured backward compatibility by allowing Ethernet initialization failures to be ignored.
Signed-off-by: Tony <tonylu@tony-cloud.com>
- Introduced EtsDeviceRuntime class to manage device runtime functionalities including handling tunnel frames and function property commands.
- Added support for individual address management and memory snapshot retrieval.
- Updated EtsMemorySnapshot structure to include individual address.
- Implemented identity application for DALI devices in the memory loader.
- Enhanced CMakeLists.txt to include new source files and compile definitions.
- Updated header files to include new dependencies and declarations.
- Refactored existing memory loading logic to accommodate new device runtime features.
Signed-off-by: Tony <tonylu@tony-cloud.com>
- Created CMakeLists.txt for the OpenKNX IDF component, ensuring dependencies on OpenKNX and TPUart submodules.
- Implemented Arduino compatibility header for basic functions like millis, delay, pinMode, and digitalRead.
- Developed EspIdfPlatform class for network interface management and multicast communication.
- Added EtsMemoryLoader for loading ETS memory snapshots and managing associations.
- Introduced TpuartUartInterface for UART communication with methods for reading, writing, and managing callbacks.
- Implemented arduino_compat.cpp for Arduino-like functionality on ESP-IDF.
- Created source files for platform and memory loader implementations.
- Updated submodules for knx, knx_dali_gw, and tpuart.
Signed-off-by: Tony <tonylu@tony-cloud.com>
- Changed flash size configuration from 16MB to 4MB and updated partition table filename.
- Introduced two gateway channels with UART configurations for communication.
- Added support for gateway cache and startup services including BLE and Wi-Fi.
- Enabled SPI RAM and configured its parameters for better memory management.
- Enhanced the gateway bridge service to handle generated Modbus points more efficiently.
- Refactored the gateway Modbus component to improve point management and added new methods for point description and generation.
- Implemented a new Gateway485ControlBridge for handling 485 control communication with UART.
- Added necessary files for the 485 control bridge including configuration and implementation.
Signed-off-by: Tony <tonylu@tony-cloud.com>
- Introduced GatewayModbusSerialConfig structure to encapsulate serial communication settings.
- Added clamping functions for integer and size values to ensure valid configuration ranges.
- Updated GatewayModbusConfigFromValue to parse serial configuration from JSON input.
- Implemented transport type checking functions for TCP, RTU, ASCII, and Serial.
- Enhanced GatewayModbusConfigToValue to include serial configuration in output.
Signed-off-by: Tony <tonylu@tony-cloud.com>
- Introduced new enum value `kShortDiagnosticBit` to `GatewayModbusGeneratedKind`.
- Enhanced `GatewayModbusPoint` and `GatewayModbusPointBinding` structures to include diagnostic snapshot, boolean key, and device type.
- Added new diagnostic bit specifications and updated the corresponding arrays for generated discrete inputs and holding registers.
- Implemented `addGeneratedDiagnosticPoint` function to handle the creation of diagnostic points.
- Updated `rebuildMap` method to include generated diagnostic points during the map rebuilding process.
Co-authored-by: Copilot <copilot@github.com>
- Created CMakeLists.txt for the Gateway Modbus component.
- Added header file `gateway_modbus.hpp` defining configuration structures, enums, and point structures.
- Implemented the `gateway_modbus.cpp` source file containing the logic for managing Modbus points, including reading and writing operations.
- Introduced utility functions for converting configurations to and from DaliValue, and for handling Modbus space and access types.
- Established a bridge class to manage Modbus points and their interactions with the DaliBridgeEngine.
Co-authored-by: Copilot <copilot@github.com>
- Introduced DaliRawFrame structure to encapsulate raw frame data.
- Enhanced DaliDomainService to manage raw frame sinks and processing.
- Implemented raw frame task for asynchronous handling of incoming DALI frames.
- Integrated raw frame handling in GatewayBleBridge and GatewayNetworkService.
- Added GatewayUsbSetupBridge to facilitate USB Serial/JTAG communication with DALI.
- Configured ESP-NOW for wireless communication and setup management.
- Updated GatewayRuntime to support clearing wireless credentials on boot button long press.
- Enhanced CMakeLists to include new components and dependencies.
Co-authored-by: Copilot <copilot@github.com>
- Added GatewayController class to manage gateway operations, including command handling, scene and group management, and BLE state management.
- Introduced methods for scene and group storage, including loading, saving, and deleting scenes/groups.
- Enhanced GatewayRuntime with BLE management capabilities, including methods to check and set BLE state, and to generate BLE gateway names.
- Implemented utility functions for string normalization and CSV parsing.
- Added notification sinks for various events in the GatewayController.
Co-authored-by: Copilot <copilot@github.com>
Tony