skarg
105 lines
4.8 KiB
C
105 lines
4.8 KiB
C
/**************************************************************************/
|
|
/* */
|
|
/* File: NetCfg.h Copyright (c) 1996,2004 */
|
|
/* Version: 4.0 On Time Informatik GmbH */
|
|
/* */
|
|
/* */
|
|
/* On Time /////////////----- */
|
|
/* Informatik GmbH ///////////// */
|
|
/* --------------------------------------------------///////////// */
|
|
/* Real-Time and System Software */
|
|
/* */
|
|
/**************************************************************************/
|
|
|
|
/* Network environment configuration file for the On Time RTOS-32 RTIP-32
|
|
demos.
|
|
|
|
By default, the RTIP-32 demos use static IP address assignment. If this is
|
|
not what you want, uncomment either #define AUTO_IP or #define DHCP. In all
|
|
cases, make sure the IP addresses (NetMask, TargetIP, DefaultGateway,
|
|
DNSServer, etc) given in the respective section below are all correct for
|
|
your select and LAN configuration. If you choose to use DHCP, the library
|
|
Dhcpc.lib must also be linked.
|
|
|
|
Please define symbol DEVICE_ID to match your target's ethernet
|
|
card and make sure that the card's hardware resource assigments are
|
|
correct (for PCI cards, the drivers will determine this information
|
|
automatically).
|
|
|
|
*/
|
|
|
|
// #define AUTO_IP // use xn_autoip() to get an IP address
|
|
// #define DHCP // if you enable this, you must also link library dhcpc.lib
|
|
|
|
#if defined(AUTO_IP) // use xn_autoip() to get an IP address
|
|
static BYTE TargetIP[] = { 0, 0, 0, 0}; // will be filled at run-time
|
|
static BYTE NetMask[] = {255, 255, 255, 0};
|
|
static BYTE MinIP[] = {192, 168, 1, 128};
|
|
static BYTE MaxIP[] = {192, 168, 1, 255};
|
|
static BYTE DefaultGateway[] = {192, 168, 1, 1}; // set to zero if not available or required
|
|
static BYTE DNSServer[] = {192, 168, 1, 1}; // ditto
|
|
#elif defined(DHCP) // use DHCP
|
|
#include <dhcpcapi.h>
|
|
static BYTE TargetIP[] = { 0, 0, 0, 0}; // will be filled at run-time
|
|
#else // static IP address assignment (default)
|
|
static BYTE TargetIP[] = {192, 168, 0, 50};
|
|
static BYTE NetMask[] = {255, 255, 255, 0};
|
|
static BYTE DefaultGateway[] = {192, 168, 0, 1}; // set to zero if not available or required
|
|
static BYTE DNSServer[] = {192, 168, 0, 1}; // ditto
|
|
#endif
|
|
|
|
#define DEVICE_ID DAVICOM_DEVICE // define your device type here
|
|
|
|
#ifndef DEVICE_ID
|
|
#error You must define Ethernet driver/resources and IP address/net mask here
|
|
#endif
|
|
|
|
// The following values are ignored for PCI devices (the BIOS supplies
|
|
// them), but they must be set correctly for ISA/PCMCIA systems and for
|
|
// PCI devices if you do not have a BIOS
|
|
|
|
#define ED_IO_ADD 0x300 // I/O address of the device
|
|
#define ED_IRQ 5 // IRQ of the device
|
|
#define ED_MEM_ADD 0 // Memory Window (only some devices)
|
|
|
|
// Define function to pull in the required driver
|
|
|
|
#if DEVICE_ID == NE2000_DEVICE
|
|
#define BIND_DRIVER xn_bind_ne2000
|
|
#elif DEVICE_ID == N83815_DEVICE
|
|
#define BIND_DRIVER xn_bind_n83815
|
|
#elif DEVICE_ID == TC90X_DEVICE
|
|
#define BIND_DRIVER xn_bind_tc90x
|
|
#elif DEVICE_ID == SMC91C9X_DEVICE
|
|
#define BIND_DRIVER xn_bind_smc91c9x
|
|
#elif DEVICE_ID == LANCE_DEVICE
|
|
#define BIND_DRIVER xn_bind_rtlance
|
|
#elif DEVICE_ID == LANCE_ISA_DEVICE
|
|
#define BIND_DRIVER xn_bind_lance_isa
|
|
#elif DEVICE_ID == LAN_CS89X0_DEVICE
|
|
#define BIND_DRIVER xn_bind_cs
|
|
#elif DEVICE_ID == I82559_DEVICE
|
|
#define BIND_DRIVER xn_bind_i82559
|
|
#elif DEVICE_ID == R8139_DEVICE
|
|
#define BIND_DRIVER xn_bind_r8139
|
|
#elif DEVICE_ID == DAVICOM_DEVICE
|
|
#define BIND_DRIVER xn_bind_davicom
|
|
#elif DEVICE_ID == RHINE_DEVICE
|
|
#define BIND_DRIVER xn_bind_rhine
|
|
#elif DEVICE_ID == AX172_DEVICE
|
|
#include <rtusb.h> // must also link Rtusb.lib and UsbInit.cpp
|
|
#define BIND_DRIVER xn_bind_ax172
|
|
#elif DEVICE_ID == AX772_DEVICE
|
|
#include <rtusb.h> // must also link Rtusb.lib and UsbInit.cpp
|
|
#define BIND_DRIVER xn_bind_ax772
|
|
#elif DEVICE_ID == PRISM_DEVICE
|
|
#include <wlanapi.h> // must also link Wlan.lib
|
|
#define BIND_DRIVER xn_bind_prism
|
|
#elif DEVICE_ID == PRISM_PCMCIA_DEVICE
|
|
#include <rtpcmcia.h>
|
|
#include <wlanapi.h> // must also link Wlan.lib
|
|
#define BIND_DRIVER xn_bind_prism_pcmcia
|
|
#else
|
|
#error Invalid DEVICE_ID value
|
|
#endif
|