added from RTOS-32 distribution

2005-05-03 21:03:30 +00:00
parent dd677858cb
commit 7fc0c082f1
1 changed files with 104 additions and 0 deletions
@@ -0,0 +1,104 @@
+/**************************************************************************/
+/*                                                                        */
+/*  File: NetCfg.h                               Copyright (c) 1996,2004  */
+/*  Version: 4.0                                 On Time Informatik GmbH  */
+/*                                                                        */
+/*                                                                        */
+/*                                      On Time        /////////////----- */
+/*                                    Informatik GmbH /////////////       */
+/* --------------------------------------------------/////////////        */
+/*                                  Real-Time and System Software         */
+/*                                                                        */
+/**************************************************************************/
+
+/* Network environment configuration file for the On Time RTOS-32 RTIP-32
+   demos.
+
+   By default, the RTIP-32 demos use static IP address assignment. If this is
+   not what you want, uncomment either #define AUTO_IP or #define DHCP. In all
+   cases, make sure the IP addresses (NetMask, TargetIP, DefaultGateway,
+   DNSServer, etc) given in the respective section below are all correct for
+   your select and LAN configuration. If you choose to use DHCP, the library
+   Dhcpc.lib must also be linked.
+
+   Please define symbol DEVICE_ID to match your target's ethernet
+   card and make sure that the card's hardware resource assigments are
+   correct (for PCI cards, the drivers will determine this information
+   automatically).
+
+*/
+
+// #define AUTO_IP    // use xn_autoip() to get an IP address
+// #define DHCP       // if you enable this, you must also link library dhcpc.lib
+
+#if defined(AUTO_IP)  // use xn_autoip() to get an IP address
+   static BYTE TargetIP[]       = {  0,   0,   0,   0};   // will be filled at run-time
+   static BYTE NetMask[]        = {255, 255, 255,   0};
+   static BYTE MinIP[]          = {192, 168,   1, 128};
+   static BYTE MaxIP[]          = {192, 168,   1, 255};
+   static BYTE DefaultGateway[] = {192, 168,   1,   1};   // set to zero if not available or required
+   static BYTE DNSServer[]      = {192, 168,   1,   1};   // ditto
+#elif defined(DHCP)   // use DHCP
+   #include <dhcpcapi.h>
+   static BYTE TargetIP[]       = {  0,   0,   0,   0};   // will be filled at run-time
+#else                 // static IP address assignment (default)
+   static BYTE TargetIP[]       = {192, 168,   0,  50};
+   static BYTE NetMask[]        = {255, 255, 255,   0};
+   static BYTE DefaultGateway[] = {192, 168,   0,   1};   // set to zero if not available or required
+   static BYTE DNSServer[]      = {192, 168,   0,   1};   // ditto
+#endif
+
+#define DEVICE_ID     DAVICOM_DEVICE   // define your device type here
+
+#ifndef DEVICE_ID
+   #error You must define Ethernet driver/resources and IP address/net mask here
+#endif
+
+// The following values are ignored for PCI devices (the BIOS supplies
+// them), but they must be set correctly for ISA/PCMCIA systems and for
+// PCI devices if you do not have a BIOS
+
+#define ED_IO_ADD     0x300              // I/O address of the device
+#define ED_IRQ        5                  // IRQ         of the device
+#define ED_MEM_ADD    0                  // Memory Window (only some devices)
+
+// Define function to pull in the required driver
+
+#if DEVICE_ID == NE2000_DEVICE
+   #define BIND_DRIVER   xn_bind_ne2000
+#elif DEVICE_ID == N83815_DEVICE
+   #define BIND_DRIVER   xn_bind_n83815
+#elif DEVICE_ID == TC90X_DEVICE
+   #define BIND_DRIVER   xn_bind_tc90x
+#elif DEVICE_ID == SMC91C9X_DEVICE
+   #define BIND_DRIVER   xn_bind_smc91c9x
+#elif DEVICE_ID == LANCE_DEVICE
+   #define BIND_DRIVER   xn_bind_rtlance
+#elif DEVICE_ID == LANCE_ISA_DEVICE
+   #define BIND_DRIVER   xn_bind_lance_isa
+#elif DEVICE_ID == LAN_CS89X0_DEVICE
+   #define BIND_DRIVER   xn_bind_cs
+#elif DEVICE_ID == I82559_DEVICE
+   #define BIND_DRIVER   xn_bind_i82559
+#elif DEVICE_ID == R8139_DEVICE
+   #define BIND_DRIVER   xn_bind_r8139
+#elif DEVICE_ID == DAVICOM_DEVICE
+   #define BIND_DRIVER   xn_bind_davicom
+#elif DEVICE_ID == RHINE_DEVICE
+   #define BIND_DRIVER   xn_bind_rhine
+#elif DEVICE_ID == AX172_DEVICE
+   #include <rtusb.h>                    // must also link Rtusb.lib and UsbInit.cpp
+   #define BIND_DRIVER   xn_bind_ax172
+#elif DEVICE_ID == AX772_DEVICE
+   #include <rtusb.h>                    // must also link Rtusb.lib and UsbInit.cpp
+   #define BIND_DRIVER   xn_bind_ax772
+#elif DEVICE_ID == PRISM_DEVICE
+   #include <wlanapi.h>                  // must also link Wlan.lib
+   #define BIND_DRIVER   xn_bind_prism
+#elif DEVICE_ID == PRISM_PCMCIA_DEVICE
+   #include <rtpcmcia.h>
+   #include <wlanapi.h>                  // must also link Wlan.lib
+   #define BIND_DRIVER   xn_bind_prism_pcmcia
+#else
+   #error Invalid DEVICE_ID value
+#endif