a36ac1ec45
Modified conflicting line endings in ../xplained/bacnet.c which were confusing some tools.
2015-09-08 22:52:56 +00:00
458d563aaf
Improved AtomicReadFile and AtomicWriteFile error detection. Eliminated redundancy in the octetstring_init function.
2015-09-01 22:24:34 +00:00
80b628453d
Fixed AUTHENTICATION_STATUS Property name. Thank you, F. Chaxel.
2015-09-01 14:10:33 +00:00
04c4becb8b
Fixed AUTHENTICATION_STATUS Property name. Thank you, F. Chaxel!
2015-08-18 16:19:18 +00:00
0a18592bc8
Fixed when pending events are not displayed in the getEventInformation demo.
2015-08-10 15:55:06 +00:00
9d595fd00d
Fixed Wireshark extcap command line parameter interface to mstpcap utility on Windows (Thank you Roland!).
...
Tested with Wireshark 1.99.7 on Windows.
To use extcap, run Wireshark and go to the About-dialog. Find a tab located there named "Folders". Locate the extcap search path. Copy the mstpcap.exe to that folder, which may not exist.
Restart Wireshark, and look for "BACnet MS/TP on COMx" interfaces.
Configure the interface to change baud rate.
Start or stop the capture directly from the interface.
2015-07-27 18:56:06 +00:00
0255d4b665
Updated Wireshark extcap command line parameter interface to mstpcap utility in the mstpcap.txt file.
2015-07-14 20:32:38 +00:00
b4ad2c2729
Added Wireshark extcap command line parameter interface to mstpcap utility.
...
Tested with Wireshark on Windows (mostly working).
To use extcap, run Wireshark and go to the About-dialog. Find a tab located there named "Folders". Locate the extcap search path. Copy the mstpcap.exe to that folder, which may not exist.
Restart Wireshark, and look for "BACnet MS/TP on COMx" interfaces.
Configure the interface to change baud rate.
Capture directly from the interface.
2015-07-14 20:31:32 +00:00
edcf8404d7
Added Arduino Uno port for W5100 Ethernet shield. Note: requires an Arduino library that is included with the Arduino board, but not included here. Thank you, Miguel Fernandes!
2015-07-07 15:02:04 +00:00
c3eddc2f1c
Cleaned up compile warnings
2015-06-29 15:16:03 +00:00
89bbfbb2ab
Fixed compile warning in GetEvent demo.
2015-06-28 20:49:48 +00:00
8c17721dcd
Fixed compile warnings in datetime library.
2015-06-28 20:40:40 +00:00
fad91ca9ce
Merged revision(s) 2826 from branches/releases/bacnet-stack-0-8-0:
...
Expose some datetime internal functions in the API.
........
2015-06-28 13:14:48 +00:00
bd7da666d9
Fixed segmentation fault in demo/router. [bugs:#34] Thank you, F. Chaxel!
2015-06-28 12:52:25 +00:00
b0bd3d6e07
added readme to PiFace demo
2015-06-25 18:45:56 +00:00
3751c1bd23
Updated mime-type for some files.
2015-06-15 15:38:31 +00:00
e14e8ffc14
Added STM32 design challenge RS-485 daughter board schematic and BOM.
2015-06-15 14:43:49 +00:00
1d4a51bc5a
Removed the "-lgcc" from the SYSTEM_LIB parameter in the BSD section of ./demo/Makefile. Nate verified that with this change and BACNET_PORT=bsd, it builds correctly on FreeBSD, OpenBSD, and OS X 10.10 using the default compiler (clang). This tweak shouldn't affect builds on other platforms. Thanks, Nate!
2015-06-03 18:43:07 +00:00
8cae75b5d2
Fixed DCC, ARF, RD, and AWF demo applications to use address_cache if available.
2015-05-29 01:46:54 +00:00
d052578777
Added readme.txt to Atmel XPLAINED port.
2015-05-26 19:55:44 +00:00
4b525b0615
Added RS-485 shield daughter board for ports/xplained project.
2015-04-16 15:13:23 +00:00
fe8e60dd3d
Added example MS/TP port to ATxmega XPLAINED A3BU evaluation board.
2015-04-16 13:23:29 +00:00
086840a763
get event information demo
2015-03-23 12:28:46 +00:00
672f499f54
Fixed comment.
2015-03-20 19:50:08 +00:00
9631b65fc5
Fixed I-Am-Router-To-Network handling in cases of a malformed packet. The packet seen in the field was a I-Am-Router-To-Network but there was an extra "Data" byte of 0x55 at the end. Thank you, Ettore.
2015-03-20 19:47:57 +00:00
e98f74424d
Fixed address_cache handling of hex DADR addresses for MS/TP or ARCNET devices. Thank you, Marshal!
2015-03-06 21:55:58 +00:00
e5384a416c
Made the example Binary Input consistent, and made the Polarity property functional.
2015-02-25 12:28:44 +00:00
6cb014ee64
Changed the Linux BACnet/IP init to use NetMask.
...
The function was modified to calculate the broadcast address from IP and netmask instead of using SIOCGIFBRDADDR. In some cases it is possible that the ioctl is successful, but the returned address is 0 (e.g. search for Bcast: 0.0.0.0). For some reason in Linux the local loopback device answers from 0.0.0.0 address. So messages broadcast to that address are received from 127.0.0.1 which can possibly create a broadcast loop. This has nothing to do with NAT, but makes the stack more robust. Thank you, Sami Pietikäinen, for the contribution!
2015-02-24 21:55:31 +00:00
98207470f4
Adds network address translation (NAT) handling to BVLC when the device is BBMD.
...
When the device is behind a NAT enabled IP router, the local subnet is not accessible from the WAN side. This means that the device's local IP address cannot be used by other devices to communicate with it. The router can port forward BACnet packets to one device in the local network, but to do so other devices need to use the global IP for communication. The considerations and limitations for NAT usage are specified in BACnet standard Annex J.7.8. Thank you, Sami Pietikäinen, for the contribution!
2015-02-24 21:54:19 +00:00
efdb70b7f9
Added simple local interface to manage entries in the broadcast distribution table. Using this interface, the BDT can be supplied by local means, e.g. device's local user interface as stated in Annex J.4.4. Thank you, Sami Pietikäinen, for the contribution!
2015-02-24 20:01:18 +00:00
0b5e336b0c
Simplified code for PROP_LOG_DEVICE_OBJECT_PROPERTY Write Property service by using existing bacapp_decode_device_obj_property_ref() routine instead of long winded code which didn't handle optional fields correctly anyway.
...
Added test in case non zero sub 1 second interval is set as this would otherwise result in 0 being stored as we truncate to 1 second resolution.
2015-02-16 10:58:31 +00:00
d7b40e0d8b
Added explicit values for denoting optional device id not present
...
Modified bacapp_decode_device_obj_property_ref() and bacapp_decode_device_obj_ref() to use above values.
2015-02-16 10:49:50 +00:00
1d9eb5318c
silenced warning about unused variable when not using intrinsic reporting
2015-02-16 10:46:52 +00:00
ce68dc5147
Silenced type conversion warning
2015-02-16 10:45:39 +00:00
1814ae1d89
Fixed MSTP data expecting reply compare, as this port uses raw buffer. Thank you Will.
2015-02-03 22:39:08 +00:00
3865a13993
Fixed the at91sam7s makefile to include new files and functions to build with latest library.
2015-01-30 20:58:16 +00:00
dd271af2ed
Fix volatile variable access in at91sam7s port example.
2015-01-30 20:54:48 +00:00
c2533b6ead
Fix excessive ReplyPostponed frames in PIC MS/TP port.
2015-01-30 20:39:02 +00:00
3a3c3c24be
Fixed encoding of NPDU in router demo. Thank you F. Chaxel.
2014-12-26 17:01:10 +00:00
27e7c4752c
clean up compiler warning
2014-11-17 04:00:24 +00:00
781da0b53b
Fixed MSTP dropped packets on Linux by fixing usage of ptheads condition variable. Turns out that condition variables cannot be used on their own. They need to be paired with a shared state such as a flag variable protected by a mutex.
2014-11-15 22:03:17 +00:00
aa124bc091
updated mstpsnap utility
2014-11-15 17:27:27 +00:00
3be7029f40
Some MS/TP fixes to the AT91SAM7S port (untested).
2014-11-12 18:11:20 +00:00
ef664ab273
Terminate the value list linked lists for the COV example object Analog Inputs. Thanks, Ed!
2014-11-11 16:56:45 +00:00
d53551558a
Merged revision(s) 2782 from branches/releases/bacnet-stack-0-8-0:
...
Added initial names and descriptions to example multi-state value and multi-state input objects.
........
2014-11-11 16:54:35 +00:00
5e476c3ffc
Improved test in BDK port.
2014-11-11 16:50:17 +00:00
4415df61f9
Fixups for an issue found during testing COVs
2014-11-10 18:29:22 +00:00
b2097a2acc
Added command line option for setting the Device Name in the demo server project.
2014-11-06 16:16:48 +00:00
66f52e438f
added some more debug to RS485 on Linux
2014-11-02 05:29:42 +00:00
3fca74bcfb
When MAC address length is zero, assume it is a broadcast. Updated the MS/TP to understand this.
2014-11-02 05:27:14 +00:00
ekh