deab12a5e1
Changed WhoHas and I-Have to use CharacterString instead of forcing ANSI X34 and C Strings. Affected all demos and ports object name, so I changed the object name function name to make sure it was noticed.
2011-03-24 16:53:02 +00:00
e48aab8ebb
When reporting abort for apdu exceeding the maximum the requester can accomodate we need to set the error code up as read property processing may have overwritten the default by then.
2011-03-14 11:11:09 +00:00
2371f4ea53
Added ifdef to allow outside configuration of MAX COV SUBSCRIPTIONS.
2011-03-12 12:08:46 +00:00
59823dde09
Corrected Abort or Reject code that is generated during ReadPropertyMultiple (seen during reading Object_List).
2011-02-24 18:07:38 +00:00
624de45fc8
Cleaned up compiler warnings when compiled with Win32 MS/TP datalink.
2011-01-14 15:23:03 +00:00
46cdade038
Corrected error response service type. Thank you, Martin!
2011-01-12 19:51:52 +00:00
aa045effaa
Corrected RPM Handler for max APDU size.
2010-12-23 05:59:09 +00:00
2a0bf4926a
Performed standard indent script indent.sh on project files.
2010-12-15 19:02:40 +00:00
2f424e038d
Touched up some of the Doxygen tags.
2010-12-03 07:25:34 +00:00
31f440e070
Implemented separate Who-Is and Who-Has handlers for the routed case, where we loop through all the Devices looking for matches.
...
Tested and improved the routing code.
Gateway demo now sends I-Am as each Device is added.
Added test for valid Network number when routing, and only send Reject message if this fails (and not if we just can't find a Device match).
Test the hop_count and discard the packet if would reach 0 and a destination Network is called for.
2010-12-02 20:33:43 +00:00
e850469da8
Added character string helper to test for printable. Added to WP checks.
2010-12-02 19:33:22 +00:00
01d1d5bd77
Changed %zu back to %d since Borland C++ doesn't understand %zu.
2010-11-30 06:08:48 +00:00
47ecaeabaa
To build the Routing demo define BAC_ROUTING in the top Makefile. The value is not important - the symbol has to be defined.
2010-11-25 05:10:01 +00:00
a595bdb4b5
Resolved more code where we didn't need to define separate BAC_ROUTING functionality, since the npdu_encode_pdu() will do the right thing if our source address is for the gateway (root device), because src->net and/or src->len will be 0.
...
For the important Device_Object_Instance_Number(), will redirect to the Routed_Device_Object_Instance_Number() function if this is a routing build.
This leaves only the Who-Is and Who-Has handlers to be dealt with.
2010-11-24 22:04:02 +00:00
22c14fccad
Followed Steve's good recommendation, and made routed_get_my_address() be a variant of datalink_get_my_address() just when routing is in use. Haven't done anything about the sending functions yet.
...
Renamed Lookup_Routed_Device_Address() as Routed_Device_Address_Lookup(), and replaced it in the routed npdu handler with a function that finds the "next" gateway or routed device, as per the destination address. (Less tied to the specifics of the gw_device.c implementation.)
Fixed a few build warnings (eg, %zu for size_t arguments).
Until we improve the makefile system, I've enabled BAC_ROUTING in config.h
2010-11-24 20:44:32 +00:00
db5dea31e7
Compiler fails - missing declaration of Get_Routed_Device_Address().
2010-11-21 17:03:04 +00:00
dbb8997b4d
Added routing support for virtual network to more of the handlers and fixed up a couple of typos from the previous changes.
...
Added ReadRange service handler so that trendlogs can be read.
2010-11-18 21:29:11 +00:00
3bb228edf2
Added routing support for virtual network so that source addresses are transmitted when required and the correct object ID is used.
2010-11-17 23:16:24 +00:00
d50eb7fef7
In bvlc.c, IP address and port number are always in the network byte order (including FD_Table[] and BBMD_Table[]).
...
The only left hton and ntoh functions are in debug_printf() and test functions.
2010-11-05 19:30:20 +00:00
a639864cc8
In bip.c getter and setter functions of IP address and Port number expect and return values in the network byte order. All ntoh and hton were eliminated from bip.c.
...
All other modules changed to be consistent.
arm7 port left unchanged.
2010-11-04 13:30:26 +00:00
2cac9ba528
Corrected printing of array properties.
2010-10-21 20:14:07 +00:00
a5f24fa19f
Tweaked the comments for better Doxygen output.
2010-10-13 19:00:57 +00:00
48411b8dbf
Routing functionality complete, and working. (Have not done extensive testing, though.)
...
For building, made it possible to include or exclude the routing functionality with simple changes in the main Makefile and enables in lib/Makefile and include/config.h
The Device object (device.c and .h) was extended to support the virtually routed Devices, with most of the new functions in new file gw_device.c to replace their simpler cousins in device.c.
2010-10-13 15:59:39 +00:00
86dbaf409b
Added handling for bacapp decode value returning error codes.
2010-10-12 03:02:05 +00:00
9058fc7f3a
Finished up the Network Layer Message handling (I hope).
...
Simplified the Router Table encoding (just based on DNETs).
2010-10-08 02:50:14 +00:00
478d7aeb41
Working out the sending of Network Layer Messages; trying to refactor the actual sending routines to just one since the beginning, end, and error handling are the same for all types - just the payload is different.
...
For many, need to know what our managed downstream BACnet Network list is, so added that argument.
2010-10-07 21:00:46 +00:00
23eecbc100
Added more informative error message.
2010-10-06 18:49:52 +00:00
9f4b8e5f19
Adding a handler for routed NPDUs (ie, Network Layer Message handling).
...
The work is not complete yet; this is an interim checkin.
2010-09-29 20:52:51 +00:00
d39d4fded3
More function documentation.
...
Defined a default Hop Count value, and used 15 instead of 255.
2010-09-29 20:29:12 +00:00
e5f5dce995
Added some javadoc-type function comments.
...
Reduced the default hop count from way-big 255 to 15.
2010-09-28 21:05:38 +00:00
9569f2c536
Fixed EOL and performed standard indentation.
2010-09-16 22:00:47 +00:00
c8f4aac1b7
Cleaning up some code to make it more robust.
2010-09-16 14:49:33 +00:00
9e13bd0ebb
converted COV to use new error, reject, abort method.
2010-09-11 19:24:20 +00:00
914a063681
removed kludge by adding initializer
2010-09-11 19:23:08 +00:00
a74e282f93
Updated some documentation about Environment Variables.
2010-09-10 18:27:58 +00:00
7928d7cb6c
Fixed compiler error (after adding a change for IAR compile).
2010-09-07 18:18:30 +00:00
4105d22b4b
Fixing compiler warnings (compiled with IAR and configured for no printing)
2010-09-07 16:16:15 +00:00
3f3af6a072
Moved variable definitions to top of functions (variables can, only be defined partway thru in C++ not C)
2010-09-03 16:48:24 +00:00
50a8a3f2fb
Changed some plumbing for printing values to handle the case of a Present-Value enumerated property from a proprietary object type.
2010-09-02 13:16:27 +00:00
81bc038abd
Change Network Layer message to print to stderr
2010-08-27 22:00:46 +00:00
b769dcbe1d
Indented.
2010-08-18 00:11:35 +00:00
a23d75689d
Correcting prototypes and includes.
2010-08-18 00:01:32 +00:00
3c9c3c2d56
Updated prototypes and include as required and found by compile with extra checking. Thanks to Nigel Jones for his "setting a bad example" article.
2010-08-17 19:43:59 +00:00
2f5c95b7a3
Added additional WhoIs for network device discovery. Thanks, David Campfield!
2010-08-17 14:03:52 +00:00
83a3f08dad
Fixed compiler warnings.
2010-08-06 22:21:29 +00:00
6c9ef7211d
Fixed indent script, and indented files.
2010-07-19 23:19:54 +00:00
e5481b4bb5
Fixed error code when array option is passed to special properties ALL, OPTIONAL, REQUIRED.
2010-07-16 14:48:52 +00:00
7852309f7e
Added error code when array option is passed to special properties ALL, OPTIONAL, REQUIRED.
2010-07-16 14:34:15 +00:00
0a468dbb5a
Added recurring foreign device registration for server demo.
2010-07-02 12:20:51 +00:00
987e28d515
Modified the ReadProperty, ReadPropertyMultiple, and WriteProperty demo applications to check source address and invoke ID on the returning acknowledge to prevent printing responses not intended for this client.
2010-06-15 14:58:27 +00:00
skarg