a5f6477364
Moved check for wild card Device Id to before call to rp_ack_encode_apdu_init so that the real Device ID is encoded in the response.
2011-12-31 07:58:13 +00:00
9c1f651458
Moved Device object dependency to the demo handlers.
2011-10-03 22:24:57 +00:00
273cc883f8
Added and corrected debugging messages.
2011-08-24 12:24:54 +00:00
3e1cb1847f
Indented project.
2011-08-17 02:27:11 +00:00
e48aab8ebb
When reporting abort for apdu exceeding the maximum the requester can accomodate we need to set the error code up as read property processing may have overwritten the default by then.
2011-03-14 11:11:09 +00:00
22c14fccad
Followed Steve's good recommendation, and made routed_get_my_address() be a variant of datalink_get_my_address() just when routing is in use. Haven't done anything about the sending functions yet.
...
Renamed Lookup_Routed_Device_Address() as Routed_Device_Address_Lookup(), and replaced it in the routed npdu handler with a function that finds the "next" gateway or routed device, as per the destination address. (Less tied to the specifics of the gw_device.c implementation.)
Fixed a few build warnings (eg, %zu for size_t arguments).
Until we improve the makefile system, I've enabled BAC_ROUTING in config.h
2010-11-24 20:44:32 +00:00
3bb228edf2
Added routing support for virtual network so that source addresses are transmitted when required and the correct object ID is used.
2010-11-17 23:16:24 +00:00
9569f2c536
Fixed EOL and performed standard indentation.
2010-09-16 22:00:47 +00:00
914a063681
removed kludge by adding initializer
2010-09-11 19:23:08 +00:00
4105d22b4b
Fixing compiler warnings (compiled with IAR and configured for no printing)
2010-09-07 16:16:15 +00:00
3c9c3c2d56
Updated prototypes and include as required and found by compile with extra checking. Thanks to Nigel Jones for his "setting a bad example" article.
2010-08-17 19:43:59 +00:00
6c9ef7211d
Fixed indent script, and indented files.
2010-07-19 23:19:54 +00:00
61bb34d726
2nd pass at changing the error/reject/abort status reporting to improve BTL test compliance. ReadProperty fully done for core and demo objects. Will tackle other services next.
2010-06-07 15:52:33 +00:00
f32e7bf1c0
Changes to error checking to report invalid requests via proper reject codes and not the blanket abort which was in place (will need to look at other service request decoders as well...) Should address question raised by Jérémy Delhomme.
2010-06-03 11:20:37 +00:00
710cfccfef
Indented using indent script.
2010-05-04 21:06:26 +00:00
cd33aa18e9
Documentation for the Data Sharing BIBBs: RP, RPM, WP.
...
A start on ReadRange for Trending BIBB.
2010-02-28 03:44:06 +00:00
1f9c13d37b
Got rid of the handler-set functions for RP,RPM,WP,RD. Just referencing the device object functions directly.
2010-02-18 03:06:03 +00:00
a911eea98f
The beginning of doxygenation:
...
As a first step, added an @file description for each file.
2010-02-14 05:41:45 +00:00
f0863c0238
Refactored RP, WP, RPM to reduce coupling with objects for Linux and Win32 ports.
2010-02-10 16:27:31 +00:00
45c631b133
Fixed up error return so that we report not having a particular instance of an object differently to not supporting that object type at all.
2010-01-21 21:51:20 +00:00
e42abbf74b
Corrected RPM and RP in ports projects to handle MAX APDU Accepted.
2010-01-11 04:39:22 +00:00
9aa653c83e
Change RP and RPM demos to send an Abort if the APDU length is longer than max-APDU-length-accepted. Thank you, Carlos!
2010-01-08 22:37:24 +00:00
7c13ab6904
First version of Trend Log which will actually log real data.
2009-12-11 14:54:56 +00:00
c04e69da8c
Fixed EOL, indent.
2009-10-24 17:02:59 +00:00
a28760bf56
Added init functions to object header files. Finished refactoring the demo read and write property handlers to use function tables.
2009-08-23 03:26:30 +00:00
3dc3da5735
Changing handlers to register objects so that handlers can remain unchanged. In Progress!
2009-08-22 19:27:18 +00:00
1477603af6
indented.
2007-11-29 16:39:48 +00:00
411d6c1b24
Indented.
2007-11-29 15:56:53 +00:00
d9c4429fd0
Corrected bug in demo RP handler for Analog Outputs. Thank you to Paul Bremer!
2007-11-08 16:45:35 +00:00
65b7dea8bf
Reducing the memory required by ATmega168 port.
2007-10-14 02:01:18 +00:00
0c527b8162
Cleaned up Borland compile.
2007-09-07 18:00:42 +00:00
880adb383f
Fixed inconsistency in demo ReadProperty handler.
2007-09-05 23:46:25 +00:00
cc4c46b84d
Corrected bug in all confirmed handlers: if a segmented message was received, the handler tried to decode it instead of immediately sending an abort. This caused lockup with WriteProperty.
2007-08-18 00:06:48 +00:00
f4f83d2d49
Refactored ReadPropertyMultiple handler.
2007-07-20 18:46:02 +00:00
9069c939da
Fixing indent oops which removed the contents of all these files.
2007-06-14 05:33:15 +00:00
ea4863ca25
Indented.
2007-06-14 05:14:26 +00:00
71d59fbb8b
Standardized the comments and indentation using the comment.sh and indent.sh scripts.
2007-02-02 02:25:15 +00:00
42985437e5
Added demo for PIC18F6720 with MS/TP datalink layer. Untested.
2007-02-01 21:37:53 +00:00
c27c5002d5
integrated the load control object into the demos.
2007-01-26 12:47:46 +00:00
5dd8c6da91
Converted to standard indent style.
2006-10-07 14:13:34 +00:00
f45d694a51
Corrected the server bit in the abort PDU which was missing for the abort messages.
2006-10-05 22:46:59 +00:00
4ddeb3dcad
Corrected ReadProperty reply when data is too big to fit into APDU. It is required to be an Abort messaage, not an Error message.
2006-10-05 12:47:23 +00:00
f54c97a657
corrected apdu encoding for error production for demo read property handler.
2006-09-24 03:03:52 +00:00
337bc5ab4e
Corrected the NPDU encoding for the demo handlers.
2006-09-23 22:02:04 +00:00
07a1077b2d
correcting the npdu encoding for handlers.
2006-09-22 21:16:20 +00:00
a30d497669
indented.
2006-08-13 00:57:17 +00:00
5bb205dc03
Changed the API to pass the NPDU data down through the datalink layer in order to make the dlmstp work since it needs data-expecting-reply information. Of course, this affected all the demos, all the unit tests, and most of the demo handlers. Corrected some TSM leaks in confirmed messages. Refactored the AtomicReadFile and AtomicWriteFile demos by moving the Send_ functions to the demo/handlers directory and using the s_whois common handler. Added some common defines for the BACnet version and revision since several modules were using the info. Hopefully I didn't break too many things.
2006-08-13 00:54:05 +00:00
8681e12031
Added a PRINT_ENABLED define to allow small embedded devices without print capability to use some functions in this module.
2006-08-10 19:37:57 +00:00
eb2bb41aca
Indented and cleaned up build. Added Multi-state Output to unit test script.
2006-08-05 22:00:27 +00:00
4d19c82f59
Created a demo Multi-state Output object, and added it to the demo applications.
2006-08-05 19:36:55 +00:00
petermcs