Rather than during class finalization.
before:
$ ./out/ReleaseX64/run_vm_tests GenKernelKernelLoadKernel
GenKernelKernelLoadKernel(RunTime): 35558
after:
$ ./out/ReleaseX64/run_vm_tests GenKernelKernelLoadKernel
GenKernelKernelLoadKernel(RunTime): 27650
Change-Id: I2a89f75c3082d7e8fbe20f4e832a609cffae43d8
Reviewed-on: https://dart-review.googlesource.com/76420
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Commit-Queue: Zach Anderson <zra@google.com>
We need to block interrupts while evaluating pragmas to prevert reentrant class finalization.
Original revision is in patchset 0.
Change-Id: I872cec4eaf4ca85567c9657c458ed39c8b2e30de
Cq-Include-Trybots: luci.dart.try:vm-kernel-win-release-x64-try, vm-kernel-optcounter-threshold-linux-release-x64-try, vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-linux-release-x64-try, vm-kernel-precomp-win-release-x64-try
Reviewed-on: https://dart-review.googlesource.com/73160
Commit-Queue: Samir Jindel <sjindel@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
- Don't add dependency on fields that are either unitialized or already marked
as non guarded (guarded cid is kIllegalCid in the first case and kDynamicCid
in the second case).
- Exit early from FieldStore if guarded_cid is kDynamicCid (or we are storing
null into a nullable field).
- Don't track exactness of fields which have function type type.
Also move logic for starting to track fields into class_finalizer because we
need resolved field types to make our decisions.
Change-Id: I164b42abe3108a70b0769f4c78d92459b4e78883
Reviewed-on: https://dart-review.googlesource.com/70620
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
As the interpreter matures it will hopefully be merged into the regular
jit configuration, but for now we make a separate configuration for it.
Change-Id: Ie287ffccadbf34243d64d90ee43cf5d429966082
Reviewed-on: https://dart-review.googlesource.com/69420
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Commit-Queue: Zach Anderson <zra@google.com>
This CL introduces, similar to RawClass::direct_subclasses_, a
RawClass::direct_implementors field which is kept up-to-date.
The generation of type testing stubs uses this cached
reverse-relationship information for faster cid-range calculation (time
spent in type testing stub generation is decreased by an order of
magnitude).
This CL also enable type testing stubs for any instantiated type.
This seems to improve
* analysis-server-cold-analysis by 6%
* analysis-server-warm-analysis by 11%
as well as other non-analysis benchmarks in JIT mode.
Issue https://github.com/dart-lang/sdk/issues/33257
Change-Id: If01ee06ac08251b2ed27f79d6b82ad7354c8336e
Reviewed-on: https://dart-review.googlesource.com/66576
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Fixes#33170: We had an assert that type variables are not bounded by "dynamic".
This assert was previously valid because the FE replaces "extends dynamic" with
"extends Object". However, it's not necessary in any way, and it's difficult to
access the Object type from outside the FE when synthesizing type parameters for
expression compilation.
Fixes#33171: The synthetic class generated during serialization to hold the
synthetic method may need to extend core library classes if the expression's
scope was within a core library class. In this case, the class finalizer needs
to avoid applying the restrictions on class extension to the synthetic class.
To facilitate this, we now use a single class name for all synthetic classes,
rather than copying the original class name. The name of the synthetic class has
no function at all, since the synthetic method is reparented to the original
class before execution.
Fixes#33239: The arguments descriptor passed to InvokeFunction for expression
functions which capture generic type parameters was using the wrong argument
count.
Fixes#33270: Use LookupClassAllowPrivate instead of LookupClass when resolving
the expression's scope in the VM.
Test Plan:
#33170: python tools/test.py -m debug -c dartk --strong service/evaluate_function_type_parameters_test
#33171: python tools/test.py -m debug -c dartk --strong service/eval_test
#33239: Updated "evaluate_function_type_parameters_test.dart".
#33270: Updated "eval_test.dart".
Change-Id: I376926bddd2224ec2322b43685d6c13831f1a8e7
Reviewed-on: https://dart-review.googlesource.com/56060
Commit-Queue: Samir Jindel <sjindel@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
Reviewed-by: Alexander Aprelev <aam@google.com>
This reverts commit 039e8a1755.
Reason for revert:
Blocks the roll into Flutter.
See https://github.com/dart-lang/sdk/issues/33095
Original change's description:
> [vm/kernel] Enable kernel2kernel "constants" transformation in AOT mode (after running TFA)
>
> This CL also uses the newer `onProblem` error reporting mechanism, which supports contexts.
>
> The errors by the constant evaluator are formatted e.g. like this:
>
> .../language_2/compile_time_constant_o_test_01.dart:14:8: Error: Duplicate keys are not allowed in constant maps (found duplicate key "StringConstant(foo)").
> "foo": 499
> ^
> .../language_2/compile_time_constant_o_test_01.dart:32:24: Context: While analyzing:
> Expect.identical(m1, m3);
>
> Change-Id: I463416e14686e218b0f08903bd6aa0bca7392260
> Reviewed-on: https://dart-review.googlesource.com/53021
> Commit-Queue: Martin Kustermann <kustermann@google.com>
> Reviewed-by: Aske Simon Christensen <askesc@google.com>
> Reviewed-by: Alexander Markov <alexmarkov@google.com>
TBR=vegorov@google.com,kustermann@google.com,alexmarkov@google.com,askesc@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I1af0200dcb0aef03c7bd9ba3b5aead1565f05708
Reviewed-on: https://dart-review.googlesource.com/54720
Reviewed-by: Zach Anderson <zra@google.com>
Reviewed-by: Alexander Aprelev <aam@google.com>
Reviewed-by: Todd Volkert <tvolkert@google.com>
Commit-Queue: Zach Anderson <zra@google.com>
This CL also uses the newer `onProblem` error reporting mechanism, which supports contexts.
The errors by the constant evaluator are formatted e.g. like this:
.../language_2/compile_time_constant_o_test_01.dart:14:8: Error: Duplicate keys are not allowed in constant maps (found duplicate key "StringConstant(foo)").
"foo": 499
^
.../language_2/compile_time_constant_o_test_01.dart:32:24: Context: While analyzing:
Expect.identical(m1, m3);
Change-Id: I463416e14686e218b0f08903bd6aa0bca7392260
Reviewed-on: https://dart-review.googlesource.com/53021
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Aske Simon Christensen <askesc@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Closes https://github.com/dart-lang/sdk/issues/32852
Change-Id: Ib79fbe7f043aa88f32bddad62d7656c638914b44
Reviewed-on: https://dart-review.googlesource.com/50944
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I6d33d4ca3d5187a1eb1664078c003061855f0160
Reviewed-on: https://dart-review.googlesource.com/50482
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I44a1d5d4b27454ae026aef2a301aada3dd399ea0
Reviewed-on: https://dart-review.googlesource.com/49861
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Issue https://github.com/dart-lang/sdk/issues/31798
Change-Id: I174a11b3b812799f399a60af799144c2ba3c26ec
Reviewed-on: https://dart-review.googlesource.com/44787
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
This CL adds tree shaking transformation into TFA transformer, replacing
simple DropMethodBodiesVisitor. In addition to removing bodies of
unreachable members, tree shaker is able to remove unused classes, typedefs
and member declarations, and replace unreachable calls with 'throw'.
Total(CodeSize) of flutter_gallery in --release mode
before: 11,671,369
after: 11,499,694
https://github.com/dart-lang/sdk/issues/30480
Change-Id: I966cf222eb9725b7a75dd193ac479436b9b9b4c3
Reviewed-on: https://dart-review.googlesource.com/46942
Commit-Queue: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
This change brings down core snapshot size by ~750KB, and brings
down app-jit snapshot size of simple "Hello, World" dart script by
~650KB. The bot cycle times will also come down by around ~20%.
Change-Id: I2a01c98bedc7ebfa2a653983995486a71504daf3
Reviewed-on: https://dart-review.googlesource.com/16323
Commit-Queue: Siva Chandra <sivachandra@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
Reviewed-by: Jens Johansen <jensj@google.com>
This allows the normal VM metadata lookup code to find metadata attached
to members which come from mixed-in classes.
This allows e.g. putting a @AlwaysInline / @NeverInline annotation on
methods of mixin classes.
Change-Id: I70639dc78fc5bab98ac7cee107c2042f84d07888
Reviewed-on: https://dart-review.googlesource.com/17164
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Before this change, each function and field had its own kernel data blob
in the VM heap. With this change, the entire kernel data of a library is
stored as one single blob in the VM heap. Functions and fields store an
offset which points to the kernel data, specific to them, in that single
blob.
The pointer to the kernel data for a library is saved in two places:
1. With the library objects themselves.
2. With all the patch classes of the library.
3. With the patch classes created during hot reload.
Change-Id: Ie03e738c4d20f16056a5ef04341b75506fda9c60
Bug:
Reviewed-on: https://dart-review.googlesource.com/6601
Commit-Queue: Siva Chandra <sivachandra@google.com>
Reviewed-by: Jens Johansen <jensj@google.com>
Obfuscation is controlled by obfuscate flag in Dart_IsolateFlags.
Obfuscation of identifiers is performed during script tokenization - when TokenStream is generated from the source. All kIDENT and kINTERPOL_VAR tokens are renamed consistently using a persistent obfuscation map stored in ObjectStore::obfuscation_map.
Some identifiers (pseudo-keywords, arithmetic operators, builtin recognized methods and entry-points) are not renamed to keep name based lookups from breaking. All other identifiers are renamed.
Constant instances of Symbol-s (both created via literal syntax #ident and using constant constructor const Symbol("ident")) are renamed consistently with corresponding identifiers.
Script urls and Library urls and names are also obfuscated.
Obfuscation map can be dumped as a JSON array at the end of precompilation using Dart_GetObfuscationMap API.
BUG=https://github.com/dart-lang/sdk/issues/30524R=rmacnak@google.com
Review-Url: https://codereview.chromium.org/3003583002 .
This CL copies the kernel bodies for all functions and
fields into the VM heap. The function bodies in the VM
heap are then used when compiling the flowgraphs.
This theoretically means that the malloc'd data can be
freed and that snapshotting from kernel could possibly
work, though it hasn't been tested.
R=kmillikin@google.com
Review-Url: https://codereview.chromium.org/2972343002 .
result type that may contain a generic function type.
Add a regression test demonstrating the fixed problem.
Rename ResolveType to ResolveTypeParameters in the parser to clarify that only
type parameters get resolved.
Rename ResolveSignature to ResolveSignatureTypeParameters for the same reason.
Correctly propagate the finalization mode when finalizing signatures.
R=rmacnak@google.com
Review-Url: https://codereview.chromium.org/2979763002 .
I collected statistics for the sizes and capacities of growable arrays which are promoted to old-space or survive an old-space gc when running dart2js and Fasta. For these applications, the vast majority of arrays stay empty. More than half of the total object size of promoted backing arrays is backing for empty growable arrays.
Furthermore, since the overhead for an array is 3 words (header, type parameters and length), and object sizes are rounded up to an even number of words, we waste one word for all even-sized arrays.
This CL changes the growth strategy so that empty growable arrays are created with a shared, zero-sized array as backing, avoiding the allocation of a backing array if no elements are added. When the array needs to grow, it starts out at 3 and grows to double size plus one each time: 7, 15, 31, ...
A few places in the VM code need to handle these shared, zero-sized arrays specially. In particular, the Array::MakeArray function needs to allocate a new, empty array if its result is to be returned to Dart code.
Benchmarks suggest that the change improves memory usage by a few percent overall and does not significantly affect run time.
BUG=
R=erikcorry@google.com
Review-Url: https://codereview.chromium.org/2949803002 .
- Put pointer to kernel data into Script.
- Replace function.kernel_function pointer to AstNode with
kernel_offset():
- Replace field.kernel_field pointer to AstNode with kernel_offest().
- Stream the previously unstreamed AstNodes: FunctionDeclaration and
FunctionExpression.
- Move special handling for _buildin.getMainClosure into the streaming
flowgraph builder.
- Delete big parts of kernel_to_il.
R=kmillikin@google.com
Review-Url: https://codereview.chromium.org/2901533002 .
Zach Anderson