TransferableTypedData instances are one-use kind of thing: once receiver materializes it, it can't be used
again, once sender sends it out to an isolate, sender can't send it to different isolate.
Example of use:
sender isolate:
```
Future<TransferableTypedData> consolidateHttpClientResponseBytes(HttpClientResponse response) {
final completer = Completer<TransferableTypedData>();
final chunks = <Uint8List>[];
response.listen((List<int> chunk) {
chunks.add(chunk);
}, onDone: () {
completer.complete(TransferableTypedData.fromList(chunks));
});
return completer.future;
}
...
sendPort.send(await consolidateHttpClientResponseBytes(response));
```
receiver isolate:
```
RawReceivePort port = RawReceivePort((TransferableTypedData transferable) {
Uint8List content = transferable.materialize().asUint8List();
...
});
```
31959[tr] and 31960[tr] tests were inspired by dartbug.com/31959, dartbug.com/31960 that this CL attempts to address:
```
╰─➤ out/ReleaseX64/dart 31960.dart
sending...
163ms for round-trip
sending...
81ms for round-trip
sending...
20ms for round-trip
sending...
14ms for round-trip
sending...
20ms for round-trip
sending...
14ms for round-trip
```
(notice no "since last checking" pauses") vs
```
╰─➤ out/ReleaseX64/dart 31960.dart
sending...
154ms since last checkin
174ms for round-trip
sending...
68ms since last checkin
9ms since last checkin
171ms for round-trip
sending...
13ms since last checkin
108ms for round-trip
sending...
14ms since last checkin
108ms for round-trip
sending...
14ms since last checkin
107ms for round-trip
```
Change-Id: I0fcb5ce285394f498c3f1db4414204531f98199d
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/99623
Commit-Queue: Alexander Aprelev <aam@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Lasse R.H. Nielsen <lrn@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Message is a C++ type with a simple ownership model appropriate for
std::unique_ptr. This CL applies the following changes:
1. All uses of "new Message(...)" are replaced with
"Message::New(...)", which is effectively
"std::make_unique<Message>(...)". (The latter was only added in C++14,
but Dart still compiles in C++11 mode.)
2. All owning Message* are replaced with std::unique_ptr<Message>. The
notable exception is MessageQueue, which still uses raw Message*
internally to simplify the linked list handling.
3. All "delete message;" statements are removed.
4. Uses of "NULL" replaced with "nullptr" as necessary.
Change-Id: I05b5804289f2a225bfa05d3c1631129358fed373
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/101222
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Matthew Dempsky <mdempsky@google.com>
This is a reland of 49c94d3600
It appears that the major regressions were introduced not by the typed data unification
changes but rather by 3fd124db1f "[vm] Repair the resolver abstraction." which got
reverted in e979895efb "Revert "[vm] Repair the resolver abstraction."
Original change's description:
> Temporary revert of two changes which potentially caused performance regressions in Flutter.
>
> Revert "[vm] Re-number class ids for internal/external typed data and typed data views"
>
> This reverts commit a062221b76.
>
> Revert "[vm] Unify internal/external/view typed data into new RawTypedDataBase class"
>
> This reverts commit 94362f1af0.
>
> Change-Id: I7189c976aa86cdcf0a3802631bff754baf3ca2cc
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98521
> Reviewed-by: Ben Konyi <bkonyi@google.com>
Change-Id: I758775ccc426a02bce538d07ea04d9c67e8933d2
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98562
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Auto-Submit: Martin Kustermann <kustermann@google.com>
This reverts commit 49c94d3600.
Reason for revert: Relanding
Original change's description:
> Temporary revert of two changes which potentially caused performance regressions in Flutter.
>
> Revert "[vm] Re-number class ids for internal/external typed data and typed data views"
>
> This reverts commit a062221b76.
>
> Revert "[vm] Unify internal/external/view typed data into new RawTypedDataBase class"
>
> This reverts commit 94362f1af0.
>
> Change-Id: I7189c976aa86cdcf0a3802631bff754baf3ca2cc
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98521
> Reviewed-by: Ben Konyi <bkonyi@google.com>
TBR=bkonyi@google.com,asiva@google.com
Change-Id: I5c5be67fcec05434283153cb2592ba41afd1f41f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98505
Reviewed-by: Ben Konyi <bkonyi@google.com>
Commit-Queue: Ben Konyi <bkonyi@google.com>
Revert "[vm] Re-number class ids for internal/external typed data and typed data views"
This reverts commit a062221b76.
Revert "[vm] Unify internal/external/view typed data into new RawTypedDataBase class"
This reverts commit 94362f1af0.
Change-Id: I7189c976aa86cdcf0a3802631bff754baf3ca2cc
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98521
Reviewed-by: Ben Konyi <bkonyi@google.com>
This moves the length field as well as an inner pointer to the start of
the data into the RawTypedDataBase class. The inner pointer is updated
on allocation, scavenges and old space compactions.
To avoid writing more assembly the typed data view factory constructors
will be generated using IL, which will update the inner pointer. This
required adding new IR instructions and changing the existing
UnboxedIntConverter instruction.
This is the foundation work to de-virtualize calls on the public typed
data types, e.g. Uint8List.
Issue https://github.com/dart-lang/sdk/issues/35154
Cq-Include-Trybots: luci.dart.try:vm-canary-linux-debug-try, vm-dartkb-linux-debug-x64-try, vm-dartkb-linux-release-x64-try, vm-kernel-asan-linux-release-x64-try, vm-kernel-checked-linux-release-x64-try, vm-kernel-linux-debug-ia32-try, vm-kernel-linux-debug-simdbc64-try, vm-kernel-linux-debug-x64-try, vm-kernel-linux-product-x64-try, vm-kernel-linux-release-ia32-try, vm-kernel-linux-release-simarm-try, vm-kernel-linux-release-simarm64-try, vm-kernel-linux-release-simdbc64-try, vm-kernel-linux-release-x64-try, vm-kernel-optcounter-threshold-linux-release-ia32-try, vm-kernel-optcounter-threshold-linux-release-x64-try, vm-kernel-precomp-android-release-arm-try, vm-kernel-precomp-bare-linux-release-simarm-try, vm-kernel-precomp-bare-linux-release-simarm64-try, vm-kernel-precomp-bare-linux-release-x64-try, vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-product-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-linux-release-x64-try, vm-kernel-precomp-obfuscate-linux-release-x64-try, vm-kernel-precomp-win-release-simarm64-try, vm-kernel-precomp-win-release-x64-try, vm-kernel-reload-linux-debug-x64-try, vm-kernel-reload-linux-release-x64-try, vm-kernel-reload-rollback-linux-debug-x64-try, vm-kernel-reload-rollback-linux-release-x64-try, vm-kernel-win-debug-ia32-try, vm-kernel-win-debug-x64-try, vm-kernel-win-product-x64-try, vm-kernel-win-release-ia32-try, vm-kernel-win-release-x64-try
Change-Id: I1aab0dd93fa0f06a05299ab4cb019cf898b9e1ef
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/97960
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
This removes the 3 fields from the classes in Dart and instead describes
the layout in C++ via a RawTypedDataView class (as already do with
normal RawTypedData). The existing "semi" TypedDataView handle class is
changed to be a real handle class.
This decreases performance of some microbenchmarks due to field guards
not being used anymore (before the JIT could add a field guard to view classes
guarding that only normal typed data is used as backing store (and not e.g. external
typed data)
Issue https://github.com/dart-lang/sdk/issues/35154
Issue https://github.com/dart-lang/sdk/issues/31954
Change-Id: I7a0022b843a4c0fa69f53dedcc4c7bd2117cdc37
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/96806
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Prototype for `dart:ffi` on Linux/MacOS x64 in JIT mode.
`dart:ffi` is experimental and its API is likely to change in the future.
Progress and design decisions are tracked in https://github.com/dart-lang/sdk/projects/13
issue: https://github.com/dart-lang/sdk/issues/34452
Change-Id: Ifa4566388e42c8757f154741d11e303465ef305d
Cq-Include-Trybots: luci.dart.try:vm-kernel-optcounter-threshold-linux-release-x64-try, vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-linux-release-x64-try, vm-kernel-precomp-mac-release-simarm64-try, vm-kernel-precomp-win-release-x64-try, vm-kernel-mac-debug-x64-try, vm-kernel-asan-linux-release-x64
Reviewed-on: https://dart-review.googlesource.com/c/80124
Reviewed-by: Samir Jindel <sjindel@google.com>
Auto-Submit: Daco Harkes <dacoharkes@google.com>
Directly referencing VM isolate instructions from an isolate snapshot causes the instructions to be copied into the isolate's image page because instructions do not use the indirection of the ref array. Duplicating the instructions caused TypeTestingStubFinder::LookupByAddresss to be unable to identity the duplicate copies of the VM isolate type testing stubs.
Fixes identity of StubCode::*TypeTest broken by duplication in snapshot.
Fixes generating AppJIT snapshots after loading from AppJIT snapshots.
Fixes attribution of ticks for type test stubs in the AOT profiler.
Change-Id: I9879a85bd548e694ee36e14f795898582ccdddb0
Reviewed-on: https://dart-review.googlesource.com/c/90501
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Reviewed-by: Zach Anderson <zra@google.com>
This CL introduces, similar to RawClass::direct_subclasses_, a
RawClass::direct_implementors field which is kept up-to-date.
The generation of type testing stubs uses this cached
reverse-relationship information for faster cid-range calculation (time
spent in type testing stub generation is decreased by an order of
magnitude).
This CL also enable type testing stubs for any instantiated type.
This seems to improve
* analysis-server-cold-analysis by 6%
* analysis-server-warm-analysis by 11%
as well as other non-analysis benchmarks in JIT mode.
Issue https://github.com/dart-lang/sdk/issues/33257
Change-Id: If01ee06ac08251b2ed27f79d6b82ad7354c8336e
Reviewed-on: https://dart-review.googlesource.com/66576
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Type canonicalization is deferred between in may involve cycles. Instances are canonicalized eagerly, but their type arguments are not necessarily canonical yet, which can lead to incorrect canonicalization of the instance.
The work around is to include the most popular type arguments in the serializer's set of base objects, bypassing deferred canonicalization. Other type arguments will continue to fail.
Bug: https://github.com/dart-lang/sdk/issues/33430
Change-Id: Ia992b3ebc2974b54acb5c88b3e1d836f6ec1f1b8
Reviewed-on: https://dart-review.googlesource.com/61721
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
Relanding 4be50d6fa1 with fixes to DBC
and location summaries: AssertAssignable must save FPU registers.
For now we are limiting this to type checks against type parameter types.
In Dart 1 mode Dart2JS compiles itself in 28s when running from source
and in 23s when running from ideal app-jit snapshot (trained on the
same workload).
Before this change in Dart 2 mode numbers were 51s and 57s respectively.
After this change in Dart 2 mode numbers are 38s and 32s. Meaning
that regression is reduced by 50%.
Issue https://github.com/dart-lang/sdk/issues/31798
Issue https://github.com/dart-lang/sdk/issues/33257
Change-Id: Ifb55f86453bfdf36a2e03bcd7f3197cfde257103
Reviewed-on: https://dart-review.googlesource.com/57980
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
This reverts commit 4be50d6fa1.
Reason for revert: Failures on SIMDBC64 and Analyzer bots.
Original change's description:
> [vm] Enable type stubs based type checks in JIT mode for some types.
>
> For now we are limiting this to type checks against type parameter types.
>
> # Performance improvements
>
> In Dart 1 mode Dart2JS compiles itself in 28s when running from source
> and in 23s when running from ideal app-jit snapshot (trained on the
> same workload).
>
> Before this change in Dart 2 mode numbers were 51s and 57s respectively.
>
> After this change in Dart 2 mode numbers are 38s and 32s. Meaning
> that regression is reduced by 50%.
>
> Issue https://github.com/dart-lang/sdk/issues/31798
> Issue https://github.com/dart-lang/sdk/issues/33257
>
> Change-Id: I34bf5385a5cc3c7702dc281c6dfa89da85d3dde1
> Reviewed-on: https://dart-review.googlesource.com/57601
> Reviewed-by: Régis Crelier <regis@google.com>
> Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
TBR=vegorov@google.com,kustermann@google.com,regis@google.com
Change-Id: I85a30c962b0cd556310e19193f5993ab76ecf2e7
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://dart-review.googlesource.com/57840
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
For now we are limiting this to type checks against type parameter types.
# Performance improvements
In Dart 1 mode Dart2JS compiles itself in 28s when running from source
and in 23s when running from ideal app-jit snapshot (trained on the
same workload).
Before this change in Dart 2 mode numbers were 51s and 57s respectively.
After this change in Dart 2 mode numbers are 38s and 32s. Meaning
that regression is reduced by 50%.
Issue https://github.com/dart-lang/sdk/issues/31798
Issue https://github.com/dart-lang/sdk/issues/33257
Change-Id: I34bf5385a5cc3c7702dc281c6dfa89da85d3dde1
Reviewed-on: https://dart-review.googlesource.com/57601
Reviewed-by: Régis Crelier <regis@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Our generated code does not keep the context in a special register
anymore (for quite some time now). The context is just another definition
in the IR language and gets assigned register locations by the linearscan
register allocator.
Furthermore we no longer use an empty context for closures which have no
captured states, instead the context of those closures is just `null`.
This CL therefore removes Object::empty_context() and the CTX constant.
Change-Id: Iea171e0d0fd56c48f1c456e08e060a12267e39cc
Reviewed-on: https://dart-review.googlesource.com/51129
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Original revision is in Patchset 1.
Run against failing kernel-precomp tests in "cl-linux-try".
Change-Id: I997de294150ef7dd0874eeccb8b6187ae64ea813
Reviewed-on: https://dart-review.googlesource.com/51220
Reviewed-by: Erik Corry <erikcorry@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Closes https://github.com/dart-lang/sdk/issues/32852
Change-Id: Ib79fbe7f043aa88f32bddad62d7656c638914b44
Reviewed-on: https://dart-review.googlesource.com/50944
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I6d33d4ca3d5187a1eb1664078c003061855f0160
Reviewed-on: https://dart-review.googlesource.com/50482
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I44a1d5d4b27454ae026aef2a301aada3dd399ea0
Reviewed-on: https://dart-review.googlesource.com/49861
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Issue https://github.com/dart-lang/sdk/issues/31798
Change-Id: I174a11b3b812799f399a60af799144c2ba3c26ec
Reviewed-on: https://dart-review.googlesource.com/44787
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
snapshot is a Dart2 snapshot or a Dart1 snapshot.
This will be used by the flutter engine to initialize itself
correctly based on the snapshot provided.
Change-Id: I06adaac74b350f96aa6ebb55887e4a81f09fbd14
Reviewed-on: https://dart-review.googlesource.com/41082
Commit-Queue: Siva Annamalai <asiva@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Samir Jindel