dart-bytecode, arm64: +4.742% geomean
dart-bytecode-jit-unopt, arm64: +12.73% geomean
dart2js-compile, x64: +3.635% geomean
In the polymorphic and unlinked cases, call to a stub the does a linear scan against an ICData.
In the monomorphic case, call to a prologue of the expected target function that checks the expected receiver class. There is additional indirection in the JIT version compared to the AOT version to also tick a usage counter so the inliner can make good decisions.
In the megamorphic case, call to a stub that does a hash table lookup against a MegamorphicCache.
Megamorphic call sites face a loss of precision in usage counts. The call site count is not recorded and the usage counter of the target function is used as an approximation.
Monomorphic and megamorphic calls sites are reset to the polymorphic/unlinked state on hot reload.
Monomorphic and megamorphic calls sites do not check the stepping state, so they are reset to the polymorphic/unlinked state when stepping begins and disabled.
Back-edges now increment the usage counter in addition to checking it. This ensures function with loops containing monomorphic calls will eventually cross the optimization threshold.
Fixed backwards use of kMonomorphicEntryOffset and kPolymorphicEntryOffset.
Fixed C stack overflow when bouncing between the KBC interpreter and a simulator.
Bug: https://github.com/dart-lang/sdk/issues/26780
Bug: https://github.com/dart-lang/sdk/issues/36409
Bug: https://github.com/dart-lang/sdk/issues/36731
Change-Id: I78a49cccd962703a459288e71ce246ed845df474
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/102820
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
This change adds merging of cid ranges into Cids::Create if there are
gaps with the same target function. Previously, this optimization was
performed only when calculating targets via CallTargets::CreateAndExpand.
However, Cids::Create is widely used to check receiver type if there is
only one targets (e.g. in CallSpecializer::AddReceiverCheck /
CallSpecializer::AddChecksForArgNr).
This optimization is needed to shrink huge code for CheckClass instructions
in Flutter RenderObject.layout() method in JIT mode.
Issue: https://github.com/dart-lang/sdk/issues/36428
Change-Id: I97051b4213066b252ac3238df55ab4ed5c98f412
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/103402
Commit-Queue: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
This reverts commit fde6a5917e.
Reason for revert: This commit looks to be causing new test failures on dart2js. While there are some odd results on some builders that look like infra failures, some builders (for example, dart2js-minified-strong-linux-x64-d8) show the new failing tests clearly.
Original change's description:
> [vm, compiler] Unoptimized megamorphic calls.
>
> When an instance call in unoptimized code creates more than FLAG_max_polymorphic_checks cases, switch the call to use a MegamorphicCache instead of ICData. The prevents unbounded collection of type feedback, and gives improvements on microbenchmarks in the 3-8% range for unoptimized code.
>
> It also leads to a loss of target frequency information for the optimizer, leading to different ordering for range checks in polymorphic inlining. This leads to changes on megamorphic microbenchmarks from -31% to +60%, weighted toward the negative end.
>
> In practice the frequency information seems unimportant, as dart2js has 4.01% geomean improvement.
>
> This is a step toward direct monomorphic calls in unoptimized code, which will also make use of the patching and type feedback extraction added here.
>
> Bug: https://github.com/dart-lang/sdk/issues/26780
> Bug: https://github.com/dart-lang/sdk/issues/36409
> Bug: https://github.com/dart-lang/sdk/issues/36731
> Change-Id: I29f53f23b6794c5f5f0db8b8184788cee16fd9c5
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/99270
> Reviewed-by: Alexander Markov <alexmarkov@google.com>
TBR=rmacnak@google.com,alexmarkov@google.com,ajcbik@google.com
Change-Id: Icad46b93cdf8541a00563f49da6b4ac0a4df1ba1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: https://github.com/dart-lang/sdk/issues/26780, https://github.com/dart-lang/sdk/issues/36409, https://github.com/dart-lang/sdk/issues/36731
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/103440
Reviewed-by: Teagan Strickland <sstrickl@google.com>
Commit-Queue: Teagan Strickland <sstrickl@google.com>
When an instance call in unoptimized code creates more than FLAG_max_polymorphic_checks cases, switch the call to use a MegamorphicCache instead of ICData. The prevents unbounded collection of type feedback, and gives improvements on microbenchmarks in the 3-8% range for unoptimized code.
It also leads to a loss of target frequency information for the optimizer, leading to different ordering for range checks in polymorphic inlining. This leads to changes on megamorphic microbenchmarks from -31% to +60%, weighted toward the negative end.
In practice the frequency information seems unimportant, as dart2js has 4.01% geomean improvement.
This is a step toward direct monomorphic calls in unoptimized code, which will also make use of the patching and type feedback extraction added here.
Bug: https://github.com/dart-lang/sdk/issues/26780
Bug: https://github.com/dart-lang/sdk/issues/36409
Bug: https://github.com/dart-lang/sdk/issues/36731
Change-Id: I29f53f23b6794c5f5f0db8b8184788cee16fd9c5
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/99270
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Currently the LoadIndexedInstr will mostly box resulting values which
might be untagged right after it to do binary int64 arithmetic on the
values.
Similarly StoreIndexedInstr takes only boxed values as inputs. Though
tight code using int64s will need to box just so the StoreIndexedInstr
unboxes it again.
To avoid the extra tagging/untagging we make the load return unboxed
values which can be optionally tagged afterwards if need be.
Issue https://github.com/dart-lang/sdk/issues/35154
Change-Id: I7e82107c2047e41699854e1534934a7cb9da691d
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/99149
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Based on the unified typed data layout, we can now inline accesses to
typed data interface classes if there are no 3rd party implementations
of those interfaces.
Example: If a receiver is of type Uint8List and we call `[]` or `[]=` we
will inline the byte access.
Instead of changing the existing inliner / call specializer we add this
as an extra pass: If the inliner / call specializer infer that the
receiver type is e.g. internal typed data then it will perform the
inlining itself using more optimized LoadIndexed instruction.
=> Only if those existing optimization passes have not been able to inline
the access will we, later on in the compilation pipeline, run a
specialized pass which will inline the accesses using LoadUntagged +
LoadIndexed (which is slightly less efficient than using only LoadIndexed
for internal typed data).
As a first step this is only done for AOT.
For ease of writing tests matching certain IR graphs this CL also adds a
IR pattern matcher.
Issue https://github.com/dart-lang/sdk/issues/35154
Cq-Include-Trybots: luci.dart.try:vm-canary-linux-debug-try, vm-dartkb-linux-debug-x64-try, vm-dartkb-linux-release-x64-try, vm-kernel-asan-linux-release-x64-try, vm-kernel-checked-linux-release-x64-try, vm-kernel-linux-debug-ia32-try, vm-kernel-linux-debug-simdbc64-try, vm-kernel-linux-debug-x64-try, vm-kernel-linux-product-x64-try, vm-kernel-linux-release-ia32-try, vm-kernel-linux-release-simarm-try, vm-kernel-linux-release-simarm64-try, vm-kernel-linux-release-simdbc64-try, vm-kernel-linux-release-x64-try, vm-kernel-optcounter-threshold-linux-release-ia32-try, vm-kernel-optcounter-threshold-linux-release-x64-try, vm-kernel-precomp-android-release-arm-try, vm-kernel-precomp-bare-linux-release-simarm-try, vm-kernel-precomp-bare-linux-release-simarm64-try, vm-kernel-precomp-bare-linux-release-x64-try, vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-product-x64-try, vm-kernel-precomp-linux-release-simarm-try, vm-kernel-precomp-linux-release-simarm64-try, vm-kernel-precomp-linux-release-x64-try, vm-kernel-precomp-obfuscate-linux-release-x64-try, vm-kernel-precomp-win-release-simarm64-try, vm-kernel-precomp-win-release-x64-try, vm-kernel-reload-linux-debug-x64-try, vm-kernel-reload-linux-release-x64-try, vm-kernel-reload-rollback-linux-debug-x64-try, vm-kernel-reload-rollback-linux-release-x64-try, vm-kernel-win-debug-ia32-try, vm-kernel-win-debug-x64-try, vm-kernel-win-product-x64-try, vm-kernel-win-release-ia32-try, vm-kernel-win-release-x64-try
Change-Id: I5f2e01a55f46b473f64478b05679f65b9fd7c4c8
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98662
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
In general we would like to keep previous results of type propagation passes, however this
leads to situations where CompileType objects owned by definitions are cached as reaching
types at uses that are no longer directly connected to the definition itself.
This leads to situations when type propagator updates the type of the definition in place
via Definition::UpdateType, but does not enqueue an instruction which uses this type which
leads to incorrect fix-point computation.
As a fix we make the fact that some CompileType objects are owned by definitions explicit
by assigning [CompileType::owner_] field. Whenever we encounter situation that reaching type's
owner does not match current definition flowing into use we clone compile type to disconnect
it from original owner and prevent hidden mutation.
This CL also fixes two minor issues:
- incorrect computation of non-nullable type from a nullable CompileType with a cid;
- assings CompileType to LoadIndexedUnsafe instructions emitted by prologue builder;
Fixes https://github.com/dart-lang/sdk/issues/36156
Bug: 36156
Change-Id: I6536cfe1fda033cba3524336bfbdb871b88a8b3f
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-android-release-arm-try, vm-kernel-precomp-bare-linux-release-simarm-try, vm-kernel-precomp-bare-linux-release-simarm64-try, vm-kernel-precomp-bare-linux-release-x64-try, vm-kernel-precomp-linux-debug-x64-try, vm-kernel-precomp-linux-product-x64-try
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98358
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
This change replaces kernel AST declarations of fields and functions
with bytecode declarations.
Size of dilp files is reduced by 11-12%.
Startup latency:
Time to the first full frame: 1.945s -> 1.687s
FinalizeClass: 554ms -> 277ms
FinishClassLoading: 296ms -> 156ms
There are following regressions in bytecode mode, which will be fixed
in future:
* dart:mirrors are not supported yet (implementation of mirrors relies
on reading kernel AST in certain cases).
As the result, lib_2/mirrors/* tests fail.
* native extensions are not supported yet (annotations on libraries
and classes in AST are cleaned up as they could reference members
which are now removed from AST).
As the result, standalone_2/entrypoints_verification_test test fails.
* language_2/spread_collections/const_error_test/* tests fail
due to https://github.com/dart-lang/sdk/issues/36286.
Change-Id: I5130f401fd7b84038b136136e7ccc1a6e51b6cea
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/97561
Commit-Queue: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Also do the same for the unsafe version of StoreIndexed.
Similar to the inliner, we may replace calls in the specializers with
these non-definition instructions, so we make variants that allow an
unrelated value to be used for the old users of the call site value. (In
all cases, this ends up being null, since the original calls wouldn't
have returned a useable value anyway.)
Change-Id: I0befd54920c4c0e63e086b804860ee4c9a7d3767
Reviewed-on: https://dart-review.googlesource.com/c/89585
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Stevie Strickland <sstrickl@google.com>
This reverts commit a8777149a7.
Reason for revert: benchmarking infrastructure reports broken benchmarks on ARM.
Original change's description:
> [VM/Compiler] Revoke definition status of certain instructions.
>
> Change StoreIndexed, StoreIndexedUnsafe, and StoreInstanceField
> to be non-definition instructions. Fix up the flow graph builders
> so they no longer treat StoreIndexed and StoreIndexedUnsafe as
> pushing values on the stack that need to be dropped.
>
> We recently changed FlowGraphInliner::TryInlineRecognizedMethod
> to create a distinction between the last instruction to be inlined
> and the definition that should be used as the new result. Perform
> the same separation of replacement code and result in the call
> specializers.
>
> Change-Id: I66c7ab60a662dcca05092e47156d1d4ba809d51f
> Reviewed-on: https://dart-review.googlesource.com/c/88326
> Commit-Queue: Stevie Strickland <sstrickl@google.com>
> Reviewed-by: Martin Kustermann <kustermann@google.com>
TBR=kustermann@google.com,sstrickl@google.com
Change-Id: I9c666d80a69ba6a5c37b421aae1ed83502694f19
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://dart-review.googlesource.com/c/89366
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Change StoreIndexed, StoreIndexedUnsafe, and StoreInstanceField
to be non-definition instructions. Fix up the flow graph builders
so they no longer treat StoreIndexed and StoreIndexedUnsafe as
pushing values on the stack that need to be dropped.
We recently changed FlowGraphInliner::TryInlineRecognizedMethod
to create a distinction between the last instruction to be inlined
and the definition that should be used as the new result. Perform
the same separation of replacement code and result in the call
specializers.
Change-Id: I66c7ab60a662dcca05092e47156d1d4ba809d51f
Reviewed-on: https://dart-review.googlesource.com/c/88326
Commit-Queue: Stevie Strickland <sstrickl@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
In Dart2, the type relation "is more specific than" is no different than "is
subtype of". Since Dart1 is not supported anymore, type checking in the runtime
can be simplified and cleaned up.
Change-Id: I8e95b9e47146315c9a6f6c29b732ecbeb4e9ae97
Reviewed-on: https://dart-review.googlesource.com/c/88221
Commit-Queue: Régis Crelier <regis@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
In Dart2, type bounds checking is either performed by the common front-end or
by explicitly generated code, but not by type finalization or runtime anymore,
as it was done in Dart1.
Consequently, the class BoundedType is not needed anymore, and malbounded or
malformed types are not seen by the runtime either.
Change-Id: I5d6e4c68d153d6730fa7ff7f6d9dcfa611299c16
Reviewed-on: https://dart-review.googlesource.com/c/86687
Commit-Queue: Régis Crelier <regis@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Samir Jindel <sjindel@google.com>
After recent changes to pragmas, TFA devirtualizes more calls, which has
regressed a Prime
This gets rid of the 5% regression in PrimeNumber/PrimeNumberTyped in
dart-aot (which 0ef66e0f5 introduced). Furthermore it improves MD5/SHA
by double digits percent.
Change-Id: Ia4d1fb62512495dec7111efc53c4d7a4de5ef3af
Reviewed-on: https://dart-review.googlesource.com/c/85398
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
This is a reland of 1a4cff1bd4
Original change's description:
> [VM] Remove unused flags
>
> Remove the following flags which are always ON
> --strong
> --reify_generic_functions
>
> and these flags which are not applicable anymore
> --error-on-bad-override
> --error-on-bad-type
> --enable-type-checks
>
> Change-Id: I6e1aeb68e663953f4ae49ca94ea0daa87b661900
> Reviewed-on: https://dart-review.googlesource.com/c/79431
> Commit-Queue: Siva Annamalai <asiva@google.com>
> Reviewed-by: Alexander Markov <alexmarkov@google.com>
> Reviewed-by: Régis Crelier <regis@google.com>
Change-Id: Ib4452c22fb05eed38820708abb648939e03b1df0
Reviewed-on: https://dart-review.googlesource.com/c/84923
Reviewed-by: Siva Annamalai <asiva@google.com>
Remove the following flags which are always ON
--strong
--reify_generic_functions
and these flags which are not applicable anymore
--error-on-bad-override
--error-on-bad-type
--enable-type-checks
Change-Id: I6e1aeb68e663953f4ae49ca94ea0daa87b661900
Reviewed-on: https://dart-review.googlesource.com/c/79431
Commit-Queue: Siva Annamalai <asiva@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Make StoreIntanceField and LoadField instructions use a single uniform
abstraction: Slot (used to be called NativeFieldDesc), which represents
either a real Dart field (i.e. a field that has a corresponding Field object)
or a native VM field that does not have a corresponding Field object.
This refactoring eliminates raw stores/loads that were just using offsets
before - now we always know what kind of slots we are accessing and
this yields better aliasing information.
Change-Id: I2f48332d58258219565bd961764e8cc9dd4d75ce
Reviewed-on: https://dart-review.googlesource.com/c/74582
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Also move deopt id computation logic into a separate class and add a comment
explaining while deopt ids are incremented by 2.
Change-Id: Ife489be7d10c7198a8e7adf9e97e0c516d78ea55
Reviewed-on: https://dart-review.googlesource.com/72685
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
CallSpecializer::TryInlineInstanceSetter was using IsReceiver to determine
type check could be skipped. However it is incorrect to use IsReceiver,
because it uses SSA notion of the receiver - rather than a syntactic
notion and all strong mode guarantees apply at syntactic level.
Additionally this CL expands support for exactness tracking to PropertySet
operations and uses it to eliminate checks on setters.
Change-Id: Idce559c4ca4c88f5788d3b6b9955b5af076bd7eb
Reviewed-on: https://dart-review.googlesource.com/72442
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Samir Jindel <sjindel@google.com>
Turn it into an isolate specific flag so that Kernel isolate continues
to run from app-jit snapshot without trusting any types.
Change-Id: I627a40025d53c23586da5a207eb096886ca98bc4
Reviewed-on: https://dart-review.googlesource.com/72040
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
We say that field's static type G<T0, ..., Tn> is exact if for
any value that can be loaded from this field, its runtime type
T is such that T at G has type arguments exactly equal to
<T0, ..., Tn>.
Know if field's static type is exact allows us to apply optimizations
that require knowing type arguments e.g.
- we can fold o.f.:type_arguments
to a constant value if we know that o.f is trivially exact;
- for method invocations o.f.m(...) we can skip argument type checks
on the callee if we know that o.f is invariant (this optimization will
be enabled once multiple entry points CLs will land).
Bug: https://github.com/dart-lang/sdk/issues/31798
Change-Id: Id565046d45a842625d41feb002b65db48451034c
Reviewed-on: https://dart-review.googlesource.com/69969
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Rationale:
The previous change to avoid speculation altogether
in AOT strong mode (to improve typed data performance)
was a bit too conservative. We only need to avoid
speculation that introduces deopting checks, not ones
with a fast/slow path where the fast path is very likely.
In the long run, better analysis may help even more.
Performance impact (restores prior drop):
Meteor +40%
JsonParseCustomReviver + 6%
https://github.com/dart-lang/sdk/issues/33656
Change-Id: I1735d8e642285cb2df538fc49468cf64a99d7f72
Reviewed-on: https://dart-review.googlesource.com/65383
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Commit-Queue: Aart Bik <ajcbik@google.com>
Previously we relegated this to the inliner which interfers with inlining
heuristics.
Additionally avoid emitting assert assignable when specializing assignments
on the receiver.
This improves the following microbenchmark by a factor of 3:
int sumList(List<A> l) {
var sum = 0;
for (var obj in l) { // this would generate AssertAssignable for
sum += obj.field; // _ListIterator._current
}
return sum;
}
Bug: https://github.com/dart-lang/sdk/issues/33257
Change-Id: Ib2fff8be7c953981bdf5967baf7fcd5f6f648dcf
Reviewed-on: https://dart-review.googlesource.com/64842
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Rationale:
Handles remaining polymorphic reason for typed_data
setters and getters (internal vs. external) during inlining.
Also introduces high level flow graph utilities that
can be reused throughout the compiler to reduce
future code duplication. Disables type speculation
for 64-bit AOT Dart2 to make all work.
Performance:
About 4x speedup on micro benchmarks (AOT64).
https://github.com/dart-lang/sdk/issues/33205
Change-Id: I678426719e49cd8aa1e5051523da12178120b3ba
Reviewed-on: https://dart-review.googlesource.com/59000
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Commit-Queue: Aart Bik <ajcbik@google.com>
If call can have type arguments we can't use call->ArgumentAt(0) to
access receiver, instead we need to use call->ArgumentAt(call->FirstArgIndex()).
This lead to a bug in polymorphic inlining of functions with type
arguments - instead of loading class id from the receiver we would be
loading it from the first argument which contains type arguments.
This CL also cleans up other parts of the compiler that used ArgumentAt(0)
when they needed receiver.
Fixes https://github.com/dart-lang/protobuf/issues/95
Change-Id: I5504f7aff714894ff9fe580710c376f1d1933bfa
Reviewed-on: https://dart-review.googlesource.com/54411
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
This reverts commit cf78da8a48.
Reason for revert: introduces significant performance regression (~30%) on analyzer benchmarks (warm-analysis) without clearly visible hot-spot.
Original change's description:
> [VM] Reduce Smi size to 32 bit on 64 bit platforms
>
> This reduces small tagged integers on 64 bit platforms from 63 bits to
> 31 bits plus one tag bit.
> This is a step on the way to compile-time-optional compressed pointers
> on 64 bit platforms. See more about this at go/dartvmlearnings
> This causes a slowdown for some uses of integers that don't fit in 31
> signed bits, but because both x64 and ARM64 have unboxed 64 bit
> integers now the performance hit should not be too bad.
>
> This is a reapplication of
> https://dart-review.googlesource.com/c/sdk/+/46244
> It was reverted due to a compilation error on 32 bit
> ARM with DBC.
>
> R=vegorov@google.com
>
> Change-Id: I943de1768519457f0e5a61ef0b4ef204b6a53281
> Reviewed-on: https://dart-review.googlesource.com/51321
> Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
TBR=vegorov@google.com,erikcorry@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I8c5b909ec38663b5f5b05f69ef488c97341f8f3d
Reviewed-on: https://dart-review.googlesource.com/54000
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
This CL fixes error message in NoSuchMethodError thrown by null checks
and line numbers in corresponding stack traces (in AOT).
Name of the called function is placed into object pool, and metadata
for null check site is generated in CodeSourceMap.
Size of flutter gallery in release mode:
Before After
RW 2165286 2201642 (+1.68%)
RO 2122192 2168224 (+2.17%)
RX 6871072 6871072 (+0.00%)
Total 11163079 11245467 (+0.74%)
Closes https://github.com/dart-lang/sdk/issues/32863
Change-Id: I5ad1190f2ec9452a669863f7dd114ea5f9092d52
Reviewed-on: https://dart-review.googlesource.com/52703
Commit-Queue: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
This reduces small tagged integers on 64 bit platforms from 63 bits to
31 bits plus one tag bit.
This is a step on the way to compile-time-optional compressed pointers
on 64 bit platforms. See more about this at go/dartvmlearnings
This causes a slowdown for some uses of integers that don't fit in 31
signed bits, but because both x64 and ARM64 have unboxed 64 bit
integers now the performance hit should not be too bad.
This is a reapplication of
https://dart-review.googlesource.com/c/sdk/+/46244
It was reverted due to a compilation error on 32 bit
ARM with DBC.
R=vegorov@google.com
Change-Id: I943de1768519457f0e5a61ef0b4ef204b6a53281
Reviewed-on: https://dart-review.googlesource.com/51321
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
This reduces small tagged integers on 64 bit platforms from 63 bits to
31 bits plus one tag bit.
This is a step on the way to compile-time-optional compressed pointers
on 64 bit platforms. See more about this at go/dartvmlearnings
This causes a slowdown for some uses of integers that don't fit in 31
signed bits, but because both x64 and ARM64 have unboxed 64 bit
integers now the performance hit should not be too bad.
This reapplies the change reviewed at
https://dart-review.googlesource.com/c/sdk/+/46244R=kustermann@google.com
Change-Id: I605c21506ec7d4c69fa7049bc419b3ee370685fc
Reviewed-on: https://dart-review.googlesource.com/50202
Reviewed-by: Martin Kustermann <kustermann@google.com>
Commit-Queue: Erik Corry <erikcorry@google.com>
This reduces small tagged integers on 64 bit platforms from 63 bits to 31 bits
plus one tag bit.
This is a step on the way to compile-time-optional compressed pointers on 64
bit platforms. See more about this at go/dartvmlearnings
This causes a slowdown for some uses of integers that don't fit in 31 signed
bits, but because both x64 and ARM64 have unboxed 64 bit integers now the
performance hit should not be too bad.
R=kustermann@google.com
Change-Id: I035ed84c29b64f0432cd2d24193eb1c6303c14b0
Reviewed-on: https://dart-review.googlesource.com/46244
Commit-Queue: Erik Corry <erikcorry@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
These two values are not necessarily in sync: FLAG_use_field_guards can be set to
false while kernel-service is running from an app-jit snapshot with field
guards.
This caused major flakiness on kernel opt-counter-threshold bot.
This was a bug introduced by refactoring in d6eb8c6c27.
Change-Id: Icba874d319c1e96df90cae2d81e0bce3e752808b
Reviewed-on: https://dart-review.googlesource.com/38620
Reviewed-by: Erik Corry <erikcorry@google.com>
This CL extends support of mixed operations in strong-mode AOT
from double/smi to double/int (if underlying code generator supports
conversions from int64 to double).
* MintToDouble instruction is renamed to Int64ToDouble.
* Code generation of Int64ToDouble is implemented on x64.
Issue: https://github.com/dart-lang/sdk/issues/30480
Change-Id: I3142302e80c2785be71d7a8baff42d40f0b5b1b8
Reviewed-on: https://dart-review.googlesource.com/35382
Commit-Queue: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Ryan Macnak