Use DART_CHECK_VALID has been incorrect since the introduction of Isolate.kill and Dart_Cleanup because it crashes when given an unwind error.
Remove long-broken FullSnapshot1 test.
Change-Id: I1427249349e8138427bc7833980b5eff6ac466db
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/98263
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
This allows developers to have more fine grained control over socket
options supported by their platforms, particularly when there is not a
nice way to encapsulate differences between IPv4 and IPv6 options (as
with IP_MULTICAST_IF and IPV6_MULTICAST_IF). It also begins the work
of exposing socket level and option values, although keeping it for now
only to a minimum necessary to assist with setting the multicast
interface for datagram sockets.
This CL also marks `multicastInterface` as deprecated.
Bug: https://github.com/dart-lang/sdk/issues/17057
Change-Id: I39b3bf3d32d39de1c777acea4425d6eb2226355d
Reviewed-on: https://dart-review.googlesource.com/c/89164
Commit-Queue: Zach Anderson <zra@google.com>
Reviewed-by: Zach Anderson <zra@google.com>
mDNS queries (and many other local queries) should be allowed to set
their TTL to 255. This patch enables that on all platforms.
On macOS in particular, a system service reserves the mDNS port. The
socket option SO_REUSEPORT is required in addition to SO_REUSEADDR to
successfully bind there; the flag is also supported on Linux, so this
patch allows it to be used there as well (but prints an error message if
it's used on any other platform).
I could use some guidance as to tests for this - is it support availble
for running tests only on specific platforms?
Bug: https://github.com/dart-lang/sdk/issues/34799 and
Change-Id: I29b620d8ec04343f356a8171bae3d385ddfa9564
https://github.com/dart-lang/sdk/issues/34782
Reviewed-on: https://dart-review.googlesource.com/c/80082
Commit-Queue: Siva Annamalai <asiva@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
Reason for revert: Breaking API change blocks Flutter rolls. Reverting
to reconsider, work around, etc..
Revert "[ VM ] Fixed issue where backing array was deleted from an ExternalTypedData before the ExternalTypedData was used."
This reverts commit 916b9da48d.
Revert "[ VM ] Fixed tests for non-UTF8 paths on Windows / Macos."
This reverts commit 6327fe91c2.
Revert "[ VM ] Fix failing tests on Windows bots after non-UTF-8 paths change."
This reverts commit b51f4b7956.
Revert "[ VM ] Updated non-UTF-8 tests to expect exceptions on OSX/iOS."
This reverts commit bcb36247d2.
Revert "Revert "[ VM ] Updated non-UTF-8 tests to expect exceptions on OSX/iOS.""
This reverts commit 24450c79a5.
Change-Id: I756f74f4acdde168d0984fe130f05f9252366334
Reviewed-on: https://dart-review.googlesource.com/55441
Reviewed-by: Todd Volkert <tvolkert@google.com>
Commit-Queue: Zach Anderson <zra@google.com>
Reland "Fix issues with FileSystemEntities which have non-UTF8 paths causing exceptions to be thrown when converting to/from a Dart VM String."
This reverts commit 4f549e2900.
Change-Id: Ia27c8c300beb178fa7b08ffe0bfcb2d61f65bbb5
Reviewed-on: https://dart-review.googlesource.com/55271
Reviewed-by: Zach Anderson <zra@google.com>
Commit-Queue: Ben Konyi <bkonyi@google.com>
The content handlers on Fuchsia can potentially give each Isolate
different handles to use for stdout and stderr. This change provides
a hook for an embedder to call to supply the handles to Dart, and
removes hardcoding of stdio handles to 0, 1, 2.
Change-Id: Ic03b77adc9a911e9c754562fa6a91f9929e10dfc
Reviewed-on: https://dart-review.googlesource.com/36122
Commit-Queue: Zach Anderson <zra@google.com>
Reviewed-by: Ryan Macnak <rmacnak@google.com>
The only fix needed for relanding is adding _ensureScheduleImmediate
to the list of vm entrypoints in //runtime/vm/compiler/aot/precompiler.cc
Original commit message:
Adds a top-level call waitForEventSync to dart:io that blocks the
thread an Isolate is running on until messages are available.
Before the thread blocks, the microtask queue is drained.
Before waitForEventSync returns, all messages are handled.
Lifting this up from a comment:
This is apropos of the request that nweiz@ sent to the mailing list a
couple weeks back. I'm not sure we should land this. We certainly
shouldn't land it without some annotations that will make the analyzer
complain a lot in most configurations, but I don't know what those
annotations are.
fixes#31102
Change-Id: Id96de46cc5f10e1847045cfafb7cfed6a38bce16
Reviewed-on: https://dart-review.googlesource.com/28920
Reviewed-by: Siva Annamalai <asiva@google.com>
Commit-Queue: Zach Anderson <zra@google.com>
Adds a top-level call waitForEventSync to dart:io that blocks the
thread an Isolate is running on until messages are available.
Before the thread blocks, the microtask queue is drained.
Before waitForEventSync returns, all messages are handled.
Lifting this up from a comment:
This is apropos of the request that nweiz@ sent to the mailing list a
couple weeks back. I'm not sure we should land this. We certainly
shouldn't land it without some annotations that will make the analyzer
complain a lot in most configurations, but I don't know what those
annotations are.
Change-Id: If8286f4525994a162dd4f4563fefccb9d0984f7c
Reviewed-on: https://dart-review.googlesource.com/25281
Commit-Queue: Zach Anderson <zra@google.com>
Reviewed-by: Siva Annamalai <asiva@google.com>
Fuchsia requires the ability to sandbox Isolates w.r.t. file IO.
When a new Isolate starts, Fuchsia will pass the Isolate an object
called a namespace. We can translate the namespace object into a
file descriptor suitable for passing to the *at() family of
POSIX file system calls. The file system calls will then
have visibility only into the specified namespace.
We also plumb Namespaces through on all the other platforms as well to
make the change easier to test and so that in the future we can
implement e.g. per-isolate cwds.
This change adds a new internal class to dart:io called _Namespace,
which is implemented in a patch file. See:
sdk/lib/io/namespace_impl.dart
runtime/bin/namespace_patch.dart
The embedder can set up a non-default namespace by calling
_Namespace._setupNamespace during Isolate setup.
Instances of _Namespace have a native field that holds a pointer
to a native Namespace object. See:
runtime/bin/namespace.h
Calls from e.g. file_impl.dart are now also passed a
_Namespace object. The implementations in e.g. file.cc and
file_linux.cc then extract the namespace, and use it to compute a
file descriptor and path suitable for passing to e.g. openat().
related US-313
R=asiva@google.com, rmacnak@google.com
Review-Url: https://codereview.chromium.org/3007703002 .
Revert "Pulled a significant portion of Socket implementation into BaseSocket in order to prepare for the synchronous socket impementations which will also use these common methods."
This reverts commit 0422920142.
Revert "Updated incorrect call to Write in process_win.cc"
This reverts commit 9e1435148b.
Revert "Fixed incorrect call to Write from process_win.cc"
This reverts commit 11dcab2bed3c9ec8ec76bc200206ac202a4a5681.
Fixed incorrect call to Write from process_win.cc
BUG=
Review-Url: https://codereview.chromium.org/2791163004 .
This CL changes File::Write on Windows to call directly to WriteFile()
instead of using _write(). This avoids a number of complexities:
1. Don't need to bother with text vs. binary mode.
2. Don't need to check both errno and GetLastError if _write() fails.
3. Don't need to convert to a wchar_t* for console output since we've
already set the code page to UTF8.
fixes#29101R=fschneider@google.com
Review-Url: https://codereview.chromium.org/2761673002 .
On Windows, some Windows 10 builds support only ANSI output, but not
input, so these need to be separated.
I'm also improving the detection on Mac and Linux to avoid hardcoding
the result. Instead, supportsAnsiEscapes will be true if isatty() and
the TERM environment variable contains the string 'xterm'.
related #28614R=lrn@google.com
Review-Url: https://codereview.chromium.org/2753233002 .
This change has two pieces.
- Set the console code page to UTF8.
- This makes strings printed with print() display correctly
- Set the file translation mode to _O_WTEXT when writing to a
stdout or stderr that is connected to a console.
- This makes strings printed with e.g. stdout.writeln()
display correctly.
fixes#28571R=asiva@google.com, fschneider@google.com
Review-Url: https://codereview.chromium.org/2698813002 .
Previously, Socket::ListInterfaces failed to set the os_error out
parameter causing a crash in the caller. This change sets an error here.
I've also added NetworkInterface.listSupported, which returns false on
Android, and true everywhere else. ifaddrs.h continues not to exist in
the NDK, so in order to support NetworkInterface.list, we'd have to
reimplement it, or find a suitable reimplementation somewhere.
related #26329R=johnmccutchan@google.com
Review URL: https://codereview.chromium.org/1916223003 .
Ryan Macnak