FLAG_use_bare_instructions is vacuously true in JIT mode, so use GetObjectPool which additionally accounts for JIT versus AOT.
TEST=examine output of --disassemble in JIT, AOT compile and AOT runtime
Change-Id: Idae17b779f16a6b823cf702bf868b232ca0e03ab
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/187521
Commit-Queue: Ryan Macnak <rmacnak@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
In bare instructions mode, we do not have a per-Code object pool,
but rather a global shared object pool. When generating instructions
that access the object pool, we use the index in the (eventually
created) global object pool.
Recently, when the V8 snapshot profile writer is active, we began
attaching an per-Code object pool so that each object in the global
object pool can be attributed to the Code objects that caused its
inclusion. This pool only has those objects attributable to this
Code object, and not all objects in the global pool up to the point
of compiling the Code object.
However, the disassembler currently only looks at whether the current
Code object has an object pool when decoding object pool accesses.
This was safe when there were no per-Code object pools in bare
instruction mode, but since the change described above, it attempts
to access the object in the Code-local pool at the same index as the
global pool and crashes.
This change fixes the disassembler so that we only try to decode the
object being accessed in the object pool when in non-bare instructions
mode.
Fixes https://github.com/dart-lang/sdk/issues/41149
Cq-Include-Trybots: luci.dart.try:vm-kernel-precomp-linux-release-x64-try,vm-kernel-precomp-linux-release-simarm_x64-try,vm-kernel-precomp-mac-release-simarm64-try,vm-kernel-precomp-win-release-x64-try
Change-Id: I96fd61d05c657a5ee1d86565cc39c83ebee587f1
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/140603
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Teagan Strickland <sstrickl@google.com>
If the dst_type of an AssertAssignable is a type parameter, the AssertAssignable
implementation will load the value of the type parameter using
the (instantiator or function) type arguments. It will then call the
type testing stub (TTS) of that type.
If the TTS is not exhaustive (e.g. because `T = X<..>` wher `X` is
implemented), it can fall back to the slower SubTypeTestCache implementation.
Right now the STC fallback will get the loaded value of the type
parameter for `dst_type` instead of the type parameter. Doing so is
incorrect.
=> This CL ensures we preserve dst_type = TypeParameter for the STC
fallback.
Issue https://github.com/dart-lang/sdk/issues/39716
Change-Id: Id5b318ed4940b4d749f6ab8b4c2a4efc295d9dde
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/127888
Auto-Submit: Martin Kustermann <kustermann@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
This reverts commit 20ec71d447.
Reason for revert: Performance regressions and seemingly broken TypedData.* benchmarks.
Original change's description:
> [vm/compiler] Fix TypeTestingStub -> SubtypeTestCache fallback code if dst_type = TypeParameter
>
> If the dst_type of an AssertAssignable is a type parameter, the AssertAssignable
> implementation will load the value of the type parameter using
> the (instantiator or function) type arguments. It will then call the
> type testing stub (TTS) of that type.
>
> If the TTS is not exhaustive (e.g. because `T = X<..>` wher `X` is
> implemented), it can fall back to the slower SubTypeTestCache implementation.
>
> Right now the STC fallback will get the loaded value of the type
> parameter for `dst_type` instead of the type parameter. Doing so is
> incorrect.
>
> => This CL ensures we preserve dst_type = TypeParameter for the STC
> fallback.
>
> Issue https://github.com/dart-lang/sdk/issues/39716
>
> Change-Id: Idea2405efbdc01c031ee68dbb345820e721533eb
> Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/127640
> Commit-Queue: Martin Kustermann <kustermann@google.com>
> Reviewed-by: Régis Crelier <regis@google.com>
TBR=vegorov@google.com,kustermann@google.com,regis@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I79f2d7db8747743a778126088e375bb4d268c91a
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/128020
Reviewed-by: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
If the dst_type of an AssertAssignable is a type parameter, the AssertAssignable
implementation will load the value of the type parameter using
the (instantiator or function) type arguments. It will then call the
type testing stub (TTS) of that type.
If the TTS is not exhaustive (e.g. because `T = X<..>` wher `X` is
implemented), it can fall back to the slower SubTypeTestCache implementation.
Right now the STC fallback will get the loaded value of the type
parameter for `dst_type` instead of the type parameter. Doing so is
incorrect.
=> This CL ensures we preserve dst_type = TypeParameter for the STC
fallback.
Issue https://github.com/dart-lang/sdk/issues/39716
Change-Id: Idea2405efbdc01c031ee68dbb345820e721533eb
Reviewed-on: https://dart-review.googlesource.com/c/sdk/+/127640
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
This is the next step towards preventing compiler from directly peeking
into runtime and instead interact with runtime through a well defined
surface. The goal of the refactoring to locate all places where compiler
accesses some runtime information and partion those accesses into two
categories:
- creating objects in the host runtime (e.g. allocating strings, numbers, etc)
during compilation;
- accessing properties of the target runtime (e.g. offsets of fields) to
embed those into the generated code;
This change introduces dart::compiler and dart::compiler::target namespaces.
All code in the compiler will gradually be moved into dart::compiler namespace.
One of the motivations for this change is to be able to prevent access to
globally defined host constants like kWordSize by shadowing them in the
dart::compiler namespace.
The nested namespace dart::compiler::target hosts all information about
target runtime that compiler could access, e.g. compiler::target::kWordSize
defines word size of the target which will eventually be made different
from the host kWordSize (defined by dart::kWordSize).
The API for compiler to runtime interaction is placed into compiler_api.h.
Note that we still permit runtime to access compiler internals directly -
this is not going to be decoupled as part of this work.
Issue https://github.com/dart-lang/sdk/issues/31709
Change-Id: If4396d295879391becfa6c38d4802bbff81f5b20
Reviewed-on: https://dart-review.googlesource.com/c/90242
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Martin Kustermann <kustermann@google.com>
Relanding 4be50d6fa1 with fixes to DBC
and location summaries: AssertAssignable must save FPU registers.
For now we are limiting this to type checks against type parameter types.
In Dart 1 mode Dart2JS compiles itself in 28s when running from source
and in 23s when running from ideal app-jit snapshot (trained on the
same workload).
Before this change in Dart 2 mode numbers were 51s and 57s respectively.
After this change in Dart 2 mode numbers are 38s and 32s. Meaning
that regression is reduced by 50%.
Issue https://github.com/dart-lang/sdk/issues/31798
Issue https://github.com/dart-lang/sdk/issues/33257
Change-Id: Ifb55f86453bfdf36a2e03bcd7f3197cfde257103
Reviewed-on: https://dart-review.googlesource.com/57980
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
This reverts commit 4be50d6fa1.
Reason for revert: Failures on SIMDBC64 and Analyzer bots.
Original change's description:
> [vm] Enable type stubs based type checks in JIT mode for some types.
>
> For now we are limiting this to type checks against type parameter types.
>
> # Performance improvements
>
> In Dart 1 mode Dart2JS compiles itself in 28s when running from source
> and in 23s when running from ideal app-jit snapshot (trained on the
> same workload).
>
> Before this change in Dart 2 mode numbers were 51s and 57s respectively.
>
> After this change in Dart 2 mode numbers are 38s and 32s. Meaning
> that regression is reduced by 50%.
>
> Issue https://github.com/dart-lang/sdk/issues/31798
> Issue https://github.com/dart-lang/sdk/issues/33257
>
> Change-Id: I34bf5385a5cc3c7702dc281c6dfa89da85d3dde1
> Reviewed-on: https://dart-review.googlesource.com/57601
> Reviewed-by: Régis Crelier <regis@google.com>
> Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
TBR=vegorov@google.com,kustermann@google.com,regis@google.com
Change-Id: I85a30c962b0cd556310e19193f5993ab76ecf2e7
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://dart-review.googlesource.com/57840
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
For now we are limiting this to type checks against type parameter types.
# Performance improvements
In Dart 1 mode Dart2JS compiles itself in 28s when running from source
and in 23s when running from ideal app-jit snapshot (trained on the
same workload).
Before this change in Dart 2 mode numbers were 51s and 57s respectively.
After this change in Dart 2 mode numbers are 38s and 32s. Meaning
that regression is reduced by 50%.
Issue https://github.com/dart-lang/sdk/issues/31798
Issue https://github.com/dart-lang/sdk/issues/33257
Change-Id: I34bf5385a5cc3c7702dc281c6dfa89da85d3dde1
Reviewed-on: https://dart-review.googlesource.com/57601
Reviewed-by: Régis Crelier <regis@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Closes https://github.com/dart-lang/sdk/issues/32852
Change-Id: Ib79fbe7f043aa88f32bddad62d7656c638914b44
Reviewed-on: https://dart-review.googlesource.com/50944
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I6d33d4ca3d5187a1eb1664078c003061855f0160
Reviewed-on: https://dart-review.googlesource.com/50482
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I44a1d5d4b27454ae026aef2a301aada3dd399ea0
Reviewed-on: https://dart-review.googlesource.com/49861
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Issue https://github.com/dart-lang/sdk/issues/31798
Change-Id: I4dc5a8a49f939178fe74d44736ef69e4b9088e46
Reviewed-on: https://dart-review.googlesource.com/46984
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
The info_array is needed to visit an ObjectPool's pointers, requiring the compactor to move the info_array's body before forwarding the ObjectPool's pointers. Moving the info_array inline remove this constraint on the compactor.
Also saves 3 words per ObjectPool modulo allocation size rounding.
Bug: https://github.com/dart-lang/sdk/issues/30978
Change-Id: I94de0e4b7356d46fb145efee7ab14abd7473eb4c
Reviewed-on: https://dart-review.googlesource.com/27480
Reviewed-by: Erik Corry <erikcorry@google.com>
When throwing to a frame scheduled for lazy deopt, update the continuation pc for that frame to be the catch handler.
Weaken new assert that the deopt pc belongs to the frame's code as the deopt pc for the last eager deopt in a function lies outside the code, after the call to the deopt stub.
R=fschneider@google.com
Review URL: https://codereview.chromium.org/2392613002 .
Instead of calling code object directly, call indirectly and
pass the code object in a register. The object pool is then loaded from
the code object. This is another preparation step for making generated code
relocatable.
All non-ia32 platforms:
No entry patching.
ARM:
PC marker (now code object) moves to the same place as on x64 (below saved PP, above saved FP).
R9 is now used as PP, R10 as CODE_REG.
BUG=
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1192103004 .
Fix bug in DecodeLoadWordFromPool: used Array::element_offset instead of ObjectPool::element_offset.
This only worked because they accidentally return the same value.
Remove virtual methods from InstructionsPatterns on ia32 and x64. Instead use a template for code reuse.
This avoids among others vtables for the *Pattern classes and saves >= 4K in VM binary code size.
BUG=
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1301963003 .
This adds meta-information to object pool entries to allow storing
untagged immediates or code addresses (ExternalLabel) directly.
This eliminates the need to generate extra code to preserve the LSB
when storing immediates as smis (x64, arm64).
BUG=
Review URL: https://codereview.chromium.org//1175523002.
- Remember the prologue offset in the Code object.
- Size of Code object does not change.
- Use the prologue offset to assist in locating the return address of the current frame.
- Prologue offset + instruction pattern matching will be accurate for all Dart code, most intrinsic prefixed Dart code, and some stub code.
- By default only collect Dart frames (normal Dart developers only care about Dart frames)
R=srdjan@google.com
Review URL: https://codereview.chromium.org//1150633002
Profiler improvements:
- Track Functions in profile and build Function based trie
- Associate code objects with functions
- Created cpu_profile.dart library
- Major speed improvements for disassembly view
- Fix truncation of disassembly comments
- Ability to get code object ticks from disassembly view
- Inlining mini-map in disassembly view.
- Remove a bunch of unused data from profile service response
- In some cases a caller PC that is better than the PC marker is inserted into the stack trace
- Inlined functions are expanded
- Ability to clear profile
- New flag '--keep_code' which keeps deoptimized code around for use by the profiler.
General fixes:
- Fix caching in service library
- Remove pubspec.yaml before running pub get
R=asiva@google.com, rmacnak@google.com
Review URL: https://codereview.chromium.org//928833003
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@44067 260f80e4-7a28-3924-810f-c04153c831b5
Ryan Macnak