This relands 75a9579ea0.
The approach works as follows:
Step 1: Kernel transform. Under the closed world assumption compute the
set of selectors dispatched dynamically, then mark all procedures that don't
match any of those selectors as 'not-dispatched-dynamically'.
Step 2: VM backend. When building IR for a function if this function was
marked as not-dispatched-dynamically then omit type checks for any parameter
that is not marked as generic-covariant-impl, as such arguments are guaranteed
to be checked on the caller side (by front-end).
+------------------------+------------+----------+-----------+--------------+
| benchmark | baseline | current | with opt | improved by |
+------------------------+------------+----------+-----------+--------------+
| stock_layout_iteration | 2366.3786 | 2724.3 | 2562.75 | -5.93% |
| stock_build_iteration | 3824.3 | 4914.8 | 4681 | -4.76% |
+------------------------+------------+----------+-----------+--------------+
* Flutter gallery Instructions size is reduced by 11% (8748720 bytes to 7846368 bytes).
Baseline is at 6196496 bytes.
Alternatively to annotating individual procedures, I considered annotating Program node
with a set of dynamically dispatched selectors. Decoding and passing this information
around proved to be quite cumbersome in the "streaming" world, so I opted for a simpler
approach where all individual procedures are annotated.
Bug: https://github.com/dart-lang/sdk/issues/3179
Change-Id: I2f32a609e3872c74d5ae7bbd97555453aaedf15f
Reviewed-on: https://dart-review.googlesource.com/38125
Commit-Queue: Samir Jindel <sjindel@google.com>
Reviewed-by: Samir Jindel <sjindel@google.com>
This reverts commit 75a9579ea0.
Reason for revert: function_subtype_bound_closure7_test fails in darkp
Original change's description:
> [vm/kernel/aot] Skip unnecessary type checks on parameters of instance methods.
>
> The approach works as follows:
>
> Step 1: Kernel transform. Under the closed world assumption compute the
> set of selectors dispatched dynamically, then mark all procedures that don't
> match any of those selectors as 'not-dispatched-dynamically'.
>
> Step 2: VM backend. When building IR for a function if this function was
> marked as not-dispatched-dynamically then omit type checks for any parameter
> that is not marked as generic-covariant-impl, as such arguments are guaranteed
> to be checked on the caller side (by front-end).
>
> # Performance Impact
>
> +------------------------+------------+----------+-----------+--------------+
> | benchmark | baseline | current | with opt | improved by |
> +------------------------+------------+----------+-----------+--------------+
> | stock_layout_iteration | 2366.3786 | 2724.3 | 2562.75 | -5.93% |
> | stock_build_iteration | 3824.3 | 4914.8 | 4681 | -4.76% |
> +------------------------+------------+----------+-----------+--------------+
>
> * Flutter gallery Instructions size is reduced by 11% (8748720 bytes to 7846368 bytes).
> Baseline is at 6196496 bytes.
>
> # Alternative Implementations
>
> Alternatively to annotating individual procedures, I considered annotating Program node
> with a set of dynamically dispatched selectors. Decoding and passing this information
> around proved to be quite cumbersome in the "streaming" world, so I opted for a simpler
> approach where all individual procedures are annotated.
>
> Change-Id: I363db6d5dd1138fe25917646313c16d0b213c3b4
> Reviewed-on: https://dart-review.googlesource.com/37822
> Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
> Reviewed-by: Alexander Markov <alexmarkov@google.com>
> Reviewed-by: Samir Jindel <sjindel@google.com>
TBR=vegorov@google.com,alexmarkov@google.com,sjindel@google.com
Change-Id: I0fd6bf3e6edfc3e605da2b996f9a0da6c409d01c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://dart-review.googlesource.com/37802
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
The approach works as follows:
Step 1: Kernel transform. Under the closed world assumption compute the
set of selectors dispatched dynamically, then mark all procedures that don't
match any of those selectors as 'not-dispatched-dynamically'.
Step 2: VM backend. When building IR for a function if this function was
marked as not-dispatched-dynamically then omit type checks for any parameter
that is not marked as generic-covariant-impl, as such arguments are guaranteed
to be checked on the caller side (by front-end).
# Performance Impact
+------------------------+------------+----------+-----------+--------------+
| benchmark | baseline | current | with opt | improved by |
+------------------------+------------+----------+-----------+--------------+
| stock_layout_iteration | 2366.3786 | 2724.3 | 2562.75 | -5.93% |
| stock_build_iteration | 3824.3 | 4914.8 | 4681 | -4.76% |
+------------------------+------------+----------+-----------+--------------+
* Flutter gallery Instructions size is reduced by 11% (8748720 bytes to 7846368 bytes).
Baseline is at 6196496 bytes.
# Alternative Implementations
Alternatively to annotating individual procedures, I considered annotating Program node
with a set of dynamically dispatched selectors. Decoding and passing this information
around proved to be quite cumbersome in the "streaming" world, so I opted for a simpler
approach where all individual procedures are annotated.
Change-Id: I363db6d5dd1138fe25917646313c16d0b213c3b4
Reviewed-on: https://dart-review.googlesource.com/37822
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Alexander Markov <alexmarkov@google.com>
Reviewed-by: Samir Jindel <sjindel@google.com>
- Add deopt ids to DebugStepInstr and StrictCompareInstr since the debugger can stop there.
- Add missing pc descriptor in DBC's StringInterpolateInstr.
Re-enable async_debugger, which had been crashing flakily from context mismatches.
R=vegorov@google.com
Review-Url: https://codereview.chromium.org/2903993002 .
i.e. #ifndef VM_WHATEVER -> #ifndef RUNTIME_VM_WHATEVER
This lets us remove a hack from the PRESUBMIT.py script that existed
for reasons that are no longer valid, and sets us up to add some
presubmit checks for the GN build.
R=asiva@google.com, rmacnak@google.com
Review URL: https://codereview.chromium.org/2450713004 .
- [x] Add three public fields to the "BoundVariable" service type: declarationTokenPos, visibleStartTokenPos, and visibleEndTokenPos. (naming suggestions welcome!)
- [x] Extend LocalVarDescriptors to hold the declaration token position (it already had the scope visibility boundaries).
- [x] Extend ContextScope to hold the declaration token position.
- [x] Add a unit test which verifies this works for local variables, function parameters, and closure captured variables.
Fixes https://github.com/dart-lang/sdk/issues/25569
BUG=
R=rmacnak@google.com
Review URL: https://codereview.chromium.org/2419013004 .
In switch statements, ‘continue L’ jumps can refer to a label
that the compiler hasn’t seen yet. The label is tentatively
to be in the innermost switch statement, but may later
be moved to an outer switch statement. The compiler must
make sure that the correct finally blocks are inlined in front
of these jumps.
BUG=26577, 25310
R=regis@google.com
Review URL: https://codereview.chromium.org/2030763002 .
- Use TokenDescriptor instead of intptr_t for all token positions.
- Use TokenDescriptor in raw_object instead of int32_t.
- TokenDescriptor is a POD with an int32_t (this shrinks the size of AST and IR nodes by 32-bits on 64-bit architectures).
There are some cleanups I plan on doing as a follow up CL:
- Replace TokenDescriptor::value() with TokenDescriptor::TokenPos()
R=iposva@google.com, rmacnak@google.com
Review URL: https://codereview.chromium.org/1644793002 .
sync closures, thereby avoiding copy of parameters on entry.
Remove variable aliases in local scopes now that another mechanism detects
use-before-define cases. Keep aliases only for captured variables of outer
functions thereby speeding up scope lookups for all Dart code (not just async).
The next step will be to try to reduce the number of captured variables in
async code.
R=hausner@google.com
Review URL: https://codereview.chromium.org//1317213003 .
The stack slots of captured parameters must be skipped when
generating sync code in optimized try-catch. Since those parameters
are initially copied into the context, their values are not recorded
in the environment.
Store-to-load forwarding may though use the original initial value
from the stack and therefore it must not be overwritten by try-sync
code that predeeds every call inside optimized try-blocks.
R=srdjan@google.com
Review URL: https://codereview.chromium.org//653073002
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@41099 260f80e4-7a28-3924-810f-c04153c831b5
Implement proper semantics if a name has been referenced in a
block and later a variable with that same name is declared.
Fix library code that was wrong.
Add new language test, delete a couple of tests that are
outdated, file co19 bug 649.
Dart2js and dart2dart are not yet implementing these compile-time
errors.
R=iposva@google.com
Review URL: https://codereview.chromium.org//51533003
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@29770 260f80e4-7a28-3924-810f-c04153c831b5
This CL affects a subset of expressions that use temporary locals: constructor
calls, array literals and and instance getter postfix-ops.
For expressions that are de-sugared in the parser I added LetNode.
It creates a scoped temporary local bound to an initializing expression.
For expressions where we need a temporary local at graph-building time,
I added a helper class TempLocalScope to easily create a single temporary
local in the graph builder since this is a frequently recurring pattern.
This simplifies code in the parser and the graph builder and also fixes a
bug with indexed-super invocation and NoSuchMethod.
BUG=dart:8918
R=kmillikin@google.com
Review URL: https://codereview.chromium.org//14942010
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@23401 260f80e4-7a28-3924-810f-c04153c831b5
This CL contains the phi insertion step of the SSA construction algorithmus: The phi instructions inserted are not functional yet. Renaming is not included yet.
I based it on Kevin's CL (http://codereview.chromium.org/10388161/), rebased and fixed a bug (added missing iterator.Advance()) there.
It also reintroduces the Definition IL class because Phi-instructions are also
definitions that are referenced by UseVal.
I also added the set of immediately dominated blocks to each basic block.
This will be needed for pre-order dominator-tree traversal in the renaming pass.
Review URL: https://chromiumcodereview.appspot.com//10539108
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@8604 260f80e4-7a28-3924-810f-c04153c831b5
Continue to bailout on optional parameters and context-allocated local
variables.
Implement compilation of Bind and Do instructions, LoadLocal and StoreLocal
computations, and temporary values. Temporary allocation assumes they obey
a stack-discipline and have a single use---so any use is always the last
use. Temporaries can then be allocated via push and used via pop. This
dart function:
hukairs(a) {
var b, c;
c = b = a;
return c;
}
compiles to this annotated generated code snippet:
;; StoreLocal(b, #null)
66: mov $0x7f99303c0021,%rax
70: mov %rax,-0x8(%rbp)
;; StoreLocal(c, #null)
74: mov $0x7f99303c0021,%rax
7e: mov %rax,-0x10(%rbp)
;; t0 <-LoadLocal(a)
82: mov 0x10(%rbp),%ax
86: push %rax
;; t0 <-StoreLocal(b, t0)
87: pop %rax
88: mov %rax,-0x8(%rbp)
8c: push %rax
;; StoreLocal(c, t0)
8d: pop %rax
8e: mov %rax,-0x10(%rbp)
;; t0 <-LoadLocal(c)
92: mov -0x10(%rbp),%ax
96: push %rax
;; return t0
97: pop %rax
;; ...
bf: mov %rbp,%rsp
c2: pop %rbp
c3: retq
R=srdjan@google.com
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com//9447102
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@4666 260f80e4-7a28-3924-810f-c04153c831b5
This change introduces variable descriptors that describe the name, stack slot index, and source code stretch in which a variable is valid.
Activation frames in the stack trace now can enumerate the variables that are active in that frame.
Next step: fetch the value of variables from the stack.
Review URL: http://codereview.chromium.org//8992020
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@2671 260f80e4-7a28-3924-810f-c04153c831b5
Alexander Markov