Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Closes https://github.com/dart-lang/sdk/issues/32852
Change-Id: Ib79fbe7f043aa88f32bddad62d7656c638914b44
Reviewed-on: https://dart-review.googlesource.com/50944
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I6d33d4ca3d5187a1eb1664078c003061855f0160
Reviewed-on: https://dart-review.googlesource.com/50482
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Martin Kustermann <kustermann@google.com>
Relands 165c583d57
[VM] Introduction of type testing stubs - Part 1
This CL:
* Adds a field to [RawAbstractType] which will always hold a pointer
to the entrypoint of a type testing stub
* Makes this new field be initialized to a default stub whenever a
instances are created (e.g. via Type::New(), snapshot reader, ...)
* Makes the clustered snapshotter write a reference to the
corresponding [RawInstructions] object when writing the field and do
the reverse when reading it.
* Makes us call the type testing stub for performing assert-assignable
checks.
To reduce unnecessary loads on callsites, we store the entrypoint of the
type testing stubs directly in the type objects. This means that the
caller of type testing stubs can simply branch there without populating
a code object first. This also means that the type testing stubs
themselves have no access to a pool and we therefore also don't hold on
to the [Code] object, only the [Instruction] object is necessary.
The type testing stubs do not setup a frame themselves and also have no
safepoint. In the case when the type testing stubs could not determine
a positive answer they will tail-call a general-purpose stub.
The general-purpose stub sets up a stub frame, tries to consult a
[SubtypeTestCache] and bails out to runtime if this was unsuccessful.
This CL is just the the first, for ease of reviewing. The actual
type-specialized type testing stubs will be generated in later CLs.
Reviewed-on: https://dart-review.googlesource.com/44787
Relands f226c22424
[VM] Introduction of type testing stubs - Part 2
This CL starts building type testing stubs specialzed for [Type] objects
we test against.
More specifically, it adds support for:
* Handling obvious fast cases on the call sites (while still having a
call to stub for negative case)
* Handling type tests against type parameters, by loading the value
of the type parameter on the call sites and invoking it's type testing stub.
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subtype-checks.
==> e.g. String/List<dynamic>
* Specialzed type testing stubs for instantiated types where we can
do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the type arguments.
==> e.g. Widget<State>, where we know [Widget] is only extended and not
implemented.
* Specialzed type testing stubs for certain non-instantiated types where we
can do [CidRange]-based subclass-checks for the class and
[CidRange]-based subtype-checks for the instantiated type arguments and
cid based comparisons for type parameters. (Note that this fast-case migth
result in some false-negatives!)
==> e.g. _HashMapEntry<K, V>, where we know [_HashMapEntry] is only
extended and not implemented.
This optimizes cases where the caller uses `new HashMap<A, B>()` and only
uses `A` and `B` as key/values (and not subclasses of it). The false-negative
can occur when subtypes of A or B are used. In such cases we fall back to the
[SubtypeTestCache]-based imlementation.
Reviewed-on: https://dart-review.googlesource.com/44788
Relands 25f98bcc75
[VM] Introduction of type testing stubs - Part 3
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Reviewed-on: https://dart-review.googlesource.com/46984
Relands 2c52480ec8
[VM] Introduction of type testing stubs - Part 4
In order to avoid generating type testing stubs for too many types in
the system - and thereby potentially cause an increase in code size -
this change introduces a smarter way to decide for which types we should
generate optimized type testing stubs.
The precompiler creates a [TypeUsageInfo] which we use to collect
information. More specifically:
a) We collect the destination types for all type checks we emit
(we do this inside AssertAssignableInstr::EmitNativeCode).
-> These are types we might want to generate optimized type testing
stubs for.
b) We collect type argument vectors used in instance creations (we do
this inside AllocateObjectInstr::EmitNativeCode) and keep a set of
of used type argument vectors for each class.
After the precompiler has finished compiling normal code we scan the set
of destination types collected in a) for uninstantiated types (or more
specifically, type parameter types).
We then propagate the type argument vectors used on object allocation sites,
which were collected in b), in order to find out what kind of types are flowing
into those type parameters.
This allows us to extend the set of types which we test against, by
adding the types that flow into type parameters.
We use this final augmented set of destination types as a "filter" when
making the decision whether to generate an optimized type testing stub
for a given type.
Reviewed-on: https://dart-review.googlesource.com/48640
Issue https://github.com/dart-lang/sdk/issues/32603
Change-Id: I44a1d5d4b27454ae026aef2a301aada3dd399ea0
Reviewed-on: https://dart-review.googlesource.com/49861
Commit-Queue: Martin Kustermann <kustermann@google.com>
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
The changes include:
* Make AssertAssignableInstr no longer have a call-summary, which
helps methods with several parameter checks by not having to
re-load/re-initialize type arguments registers
* Lazily create SubtypeTestCaches: We already go to runtime to warm up
the caches, so we now also create the caches on the first runtime
call and patch the pool entries.
* No longer load the destination name into a register: We only need
the name when we throw an exception, so it is not on the hot path.
Instead we let the runtime look at the call site, decoding a pool
index from the instructions stream. The destination name will be
available in the pool, at a consecutive index to the subtype cache.
* Remove the fall-through to N=1 case for probing subtypeing tests,
since those will always be handled by the optimized stubs.
* Do not generate optimized stubs for FutureOr<T> (so far it just
falled-through to TTS). We can make optimzed version of that later,
but it requires special subtyping rules.
* Local code quality improvement in the type-testing-stubs: Avoid
extra jump at last case of cid-class-range checks.
There are still a number of optimization opportunities we can do in
future changes.
Issue https://github.com/dart-lang/sdk/issues/31798
Change-Id: I4dc5a8a49f939178fe74d44736ef69e4b9088e46
Reviewed-on: https://dart-review.googlesource.com/46984
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Reviewed-by: Régis Crelier <regis@google.com>
New folder structure (nested under vm/):
- compiler/
- jit/ - JIT specific code
- aot/ - AOT specific code
- backend/ - all middle-end and back-end code (IL, flow graph)
- assembler/ - assemblers and disassemblers
- frontend/ - front ends (AST -> IL, Kernel -> IL)
compiler/README.md would be the documentation root for the compiler
pipeline
Bug: https://github.com/dart-lang/sdk/issues/30575
Change-Id: I2dfd9688793bff737f7632ddc77fca766875ce36
Reviewed-on: https://dart-review.googlesource.com/2940
Reviewed-by: Vyacheslav Egorov <vegorov@google.com>
Commit-Queue: Vyacheslav Egorov <vegorov@google.com>
When throwing to a frame scheduled for lazy deopt, update the continuation pc for that frame to be the catch handler.
Weaken new assert that the deopt pc belongs to the frame's code as the deopt pc for the last eager deopt in a function lies outside the code, after the call to the deopt stub.
R=fschneider@google.com
Review URL: https://codereview.chromium.org/2392613002 .
The call sequence is very similar to a classic IC call, except the guarded class and the target are loaded indirectly from the constant pool instead of as immediates. In the monomorphic case, we call directly to the expected target with a class check in the callee. In the unlinked, polymorphic and megamorphic cases, we call a stub; these case are now call-through instead of call-and-return.
Every code, except stubs involved in switchable calls, includes the class check sequence at the beginning. So we now distinguish between a checked and an unchecked entry point. Generated code except the switchable call continues to use the unchecked entry point.
PC offsets are calculated relative to the beginning of the instruction stream, rather than either entry point.
BUG=
R=fschneider@google.com
Review URL: https://codereview.chromium.org/2226893002 .
Reserve first element in the Function's ic_data_array to hold the edge
counter array.
Until now we had a one-element array per edge counter. This reduces memory
used by edge counters.
This CL allows to optimize code without having to have the unoptimized
code present.
Also, save space in Instruction by making place_id_ and lifetime_position_
a union. place_id_ is exclusively needed by Load/StoreOptimizer,
lifetime_position by the FlowGraphAllocator.
BUG=
R=asiva@google.com
Review URL: https://codereview.chromium.org//1343383003 .
Instead of calling code object directly, call indirectly and
pass the code object in a register. The object pool is then loaded from
the code object. This is another preparation step for making generated code
relocatable.
All non-ia32 platforms:
No entry patching.
ARM:
PC marker (now code object) moves to the same place as on x64 (below saved PP, above saved FP).
R9 is now used as PP, R10 as CODE_REG.
BUG=
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1192103004 .
The first invocation of a native functions goes into LinkNativeCall which
determines the final entry point and patches the object pool entry.
When running precompiled code, this makes deserializing the object
pool entries for native functions easy, they all initially point to
a single entry (LinkNativeCall).
BUG=
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1294113004 .
Fix bug in DecodeLoadWordFromPool: used Array::element_offset instead of ObjectPool::element_offset.
This only worked because they accidentally return the same value.
Remove virtual methods from InstructionsPatterns on ia32 and x64. Instead use a template for code reuse.
This avoids among others vtables for the *Pattern classes and saves >= 4K in VM binary code size.
BUG=
R=rmacnak@google.com
Review URL: https://codereview.chromium.org//1301963003 .
This adds meta-information to object pool entries to allow storing
untagged immediates or code addresses (ExternalLabel) directly.
This eliminates the need to generate extra code to preserve the LSB
when storing immediates as smis (x64, arm64).
BUG=
Review URL: https://codereview.chromium.org//1175523002.
Instead of changing the generated code, change the target of calls
by changing the corresponding entry in the constant pool. Patchable
call sites can't share constant pool entries for now.
x64 and arm64 already had support for patching call targets in the
constant pool, but the debugger used to change the code instead.
This eliminates the fixed debugger stub entries in every constant pool.
R=hausner@google.com
Review URL: https://codereview.chromium.org//1137313002
Introduce a new PcDescriptor kind to distinguish closure calls from other runtime calls. The debugger can patch these calls to set a breakpoint. When stepping into a closure call, the debugger must fish out the closure object from the stack, find the function and set breakpoints in it.
Arm and Mips breakpoint stubs are not implemented yet. ia32 and x64 stubs tested by hand. Automated test to follow.
R=srdjan@google.com
Review URL: https://codereview.chromium.org//14858033
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@22596 260f80e4-7a28-3924-810f-c04153c831b5
which have different implementations of 'operator=' and 'operator^='.
In the case of FINAL_OBJECT_IMPLEMENTATION we do not do the vtable setting
in these methods (Note the |= operator functionality is now subsumed into
the new implementation of "operator^=")
Review URL: https://codereview.chromium.org//12052033
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@17491 260f80e4-7a28-3924-810f-c04153c831b5
The code can be patched if it should not be executed any longer.
The code can be now patched at other location than at entry, the requirement is still that patching code does not overwrite an inlined object.
Intrinsic methods that do not have a fall through cannot be patched.
Review URL: https://codereview.chromium.org//11783066
git-svn-id: https://dart.googlecode.com/svn/branches/bleeding_edge/dart@16897 260f80e4-7a28-3924-810f-c04153c831b5
Martin Kustermann