Tony
20642e5ec3
This commit add comat parameter for some old DALI-1 control gear. Signed-off-by: Tony <tonylu@tony-cloud.com>
237 lines
6.3 KiB
Plaintext
237 lines
6.3 KiB
Plaintext
menu "DALI Component"
|
|
|
|
config DALI_PHY_COUNT
|
|
int "Maximum DALI buses"
|
|
range 1 16
|
|
default 16
|
|
help
|
|
Maximum number of DALI PHY buses managed by this component.
|
|
|
|
config DALI_DEFAULT_BAUDRATE
|
|
int "Default DALI baudrate"
|
|
range 400 2400
|
|
default 1200
|
|
help
|
|
Default baudrate used during initialization.
|
|
|
|
config DALI_TIMER_RESOLUTION_HZ
|
|
int "Native DALI timer resolution Hz"
|
|
range 1000000 8000000
|
|
default 3636363
|
|
help
|
|
GPTimer resolution for native DALI Manchester timing. The default
|
|
3.636363 MHz timing matches the gateway's tuned 1200 bps behavior for
|
|
older control gear that needs more recovery margin between commands.
|
|
|
|
config DALI_CUSTOM_HALF_BIT_TIME_X100_US
|
|
int "Custom native DALI half-bit time x100 us"
|
|
range 0 500000
|
|
default 0
|
|
help
|
|
Development override for the native DALI half-bit period, expressed in
|
|
1/100 us. Set to 0 to derive the value from the configured baudrate.
|
|
Standard 1200 bps DALI is 41667, meaning 416.67 us.
|
|
|
|
config DALI_TX_STOP_CONDITION_US
|
|
int "Custom TX stop condition us"
|
|
range 0 10000
|
|
default 0
|
|
help
|
|
Development override for the native TX stop-condition wait. Set to 0 to
|
|
use the scaled standard timing.
|
|
|
|
config DALI_RX_STOP_CONDITION_US
|
|
int "Custom RX stop condition us"
|
|
range 0 10000
|
|
default 0
|
|
help
|
|
Development override for the native RX stop-condition wait. Set to 0 to
|
|
use the scaled standard timing.
|
|
|
|
config DALI_QUERY_RESPONSE_TIMEOUT_MS
|
|
int "DALI query response timeout ms"
|
|
range 10 100
|
|
default 30
|
|
help
|
|
Time to wait for a complete backward frame after a forward query has
|
|
finished transmitting. DALI backward frames start 5.5-10.5 ms after the
|
|
forward frame and last about 9.95 ms, so 25 ms leaves margin without the
|
|
legacy 50 ms no-response delay.
|
|
|
|
config DALI_DOUBLE_SEND_DELAY_MS
|
|
int "Double-send delay ms"
|
|
range 0 100
|
|
default 20
|
|
help
|
|
Delay between the two frames sent by dali_send_double(), measured after
|
|
the first frame has completed. Exposed for development tuning.
|
|
|
|
config DALI_FORWARD_ACTIVITY_WAIT_MS
|
|
int "Forward-frame wait after bus activity ms"
|
|
range 0 1000
|
|
default 20
|
|
help
|
|
Minimum delay before sending a 2- to 4-byte forward frame after normal
|
|
bus activity. This is the native queue anti-collision wait.
|
|
|
|
config DALI_FORWARD_AFTER_BACKWARD_WAIT_MS
|
|
int "Forward-frame wait after backward frame ms"
|
|
range 0 1000
|
|
default 10
|
|
help
|
|
Minimum delay before sending a 2- to 4-byte forward frame after the last
|
|
valid 1-byte backward frame received by the native bus.
|
|
|
|
config DALI_FORWARD_MAX_WAIT_MS
|
|
int "Forward-frame maximum queue wait ms"
|
|
range 0 5000
|
|
default 50
|
|
help
|
|
Maximum time the native queue waits for a forward-frame send window. If
|
|
no valid send window is reached before this timeout, the frame is
|
|
dropped with an error status.
|
|
|
|
config DALI_BACKWARD_IDLE_TIMEOUT_MS
|
|
int "Backward-frame idle wait timeout ms"
|
|
range 0 1000
|
|
default 10
|
|
help
|
|
Time a 1-byte backward frame waits for an idle bus before being sent
|
|
anyway. Backward frame sends are not echo-verified because collisions
|
|
during addressing responses are valid DALI behavior.
|
|
|
|
config DALI_BUS_POWER_CHECK_INTERVAL_MS
|
|
int "Bus power-down check interval ms"
|
|
range 10 5000
|
|
default 500
|
|
help
|
|
Interval used to resample the RX pin while the native DALI bus is marked
|
|
power-down. This lets the HAL recover when the bus was already powered
|
|
before gateway startup and no RX edge is generated.
|
|
|
|
config DALI_BUS_ABNORMAL_REPORT_INTERVAL_MS
|
|
int "Legacy bus abnormal report interval ms"
|
|
range 0 60000
|
|
default 3000
|
|
help
|
|
Interval for publishing the legacy two-byte FF FD bus-abnormal raw frame
|
|
while the native DALI bus is power-down. Set to 0 to disable the report.
|
|
|
|
choice DALI_LOG_LEVEL_CHOICE
|
|
prompt "DALI log level"
|
|
default DALI_LOG_LEVEL_WARN
|
|
help
|
|
Runtime log level applied to the native DALI HAL ESP-IDF log tag.
|
|
|
|
config DALI_LOG_LEVEL_NONE
|
|
bool "No output"
|
|
|
|
config DALI_LOG_LEVEL_ERROR
|
|
bool "Error"
|
|
|
|
config DALI_LOG_LEVEL_WARN
|
|
bool "Warning"
|
|
|
|
config DALI_LOG_LEVEL_INFO
|
|
bool "Info"
|
|
|
|
config DALI_LOG_LEVEL_DEBUG
|
|
bool "Debug"
|
|
|
|
config DALI_LOG_LEVEL_VERBOSE
|
|
bool "Verbose"
|
|
|
|
endchoice
|
|
|
|
config DALI_LOG_LEVEL
|
|
int
|
|
default 0 if DALI_LOG_LEVEL_NONE
|
|
default 1 if DALI_LOG_LEVEL_ERROR
|
|
default 2 if DALI_LOG_LEVEL_WARN
|
|
default 3 if DALI_LOG_LEVEL_INFO
|
|
default 4 if DALI_LOG_LEVEL_DEBUG
|
|
default 5 if DALI_LOG_LEVEL_VERBOSE
|
|
|
|
choice DALI_TX_ACTIVE_LEVEL
|
|
prompt "DALI TX pin active level"
|
|
default DALI_TX_ACTIVE_LOW
|
|
help
|
|
Select the physical GPIO level that drives the DALI bus active. The
|
|
native gateway default is TX active low.
|
|
|
|
config DALI_TX_ACTIVE_LOW
|
|
bool "Active low"
|
|
|
|
config DALI_TX_ACTIVE_HIGH
|
|
bool "Active high"
|
|
|
|
endchoice
|
|
|
|
choice DALI_RX_ACTIVE_LEVEL
|
|
prompt "DALI RX pin active level"
|
|
default DALI_RX_ACTIVE_HIGH
|
|
help
|
|
Select the physical GPIO level read when the DALI bus is active. The
|
|
native gateway default is RX active high.
|
|
|
|
config DALI_RX_ACTIVE_LOW
|
|
bool "Active low"
|
|
|
|
config DALI_RX_ACTIVE_HIGH
|
|
bool "Active high"
|
|
|
|
endchoice
|
|
|
|
config DALI_API_QUEUE_LEN
|
|
int "Global API queue length"
|
|
range 1 64
|
|
default 10
|
|
|
|
config DALI_TX_QUEUE_LEN
|
|
int "Per-bus TX queue length"
|
|
range 1 16
|
|
default 1
|
|
|
|
config DALI_TX_REPLY_QUEUE_LEN
|
|
int "Per-bus TX reply queue length"
|
|
range 1 32
|
|
default 4
|
|
|
|
config DALI_RX_QUEUE_LEN
|
|
int "Per-bus RX queue length"
|
|
range 1 128
|
|
default 50
|
|
|
|
config DALI_DEBUG_QUEUE_LEN
|
|
int "Debug queue length"
|
|
range 1 256
|
|
default 100
|
|
|
|
config DALI_ENABLE_DEBUG_TASK
|
|
bool "Enable debug task"
|
|
default n
|
|
help
|
|
When enabled, starts a low-priority task that prints RX timing traces.
|
|
|
|
config DALI_DALI_TASK_STACK_SIZE
|
|
int "DALI task stack size"
|
|
range 1024 8192
|
|
default 4096
|
|
|
|
config DALI_DALI_TASK_PRIORITY
|
|
int "DALI task priority"
|
|
range 1 24
|
|
default 2
|
|
|
|
config DALI_DEBUG_TASK_STACK_SIZE
|
|
int "Debug task stack size"
|
|
range 1024 8192
|
|
default 2048
|
|
|
|
config DALI_DEBUG_TASK_PRIORITY
|
|
int "Debug task priority"
|
|
range 1 24
|
|
default 1
|
|
|
|
endmenu
|