Kari Argillander
369da70f2a
* format: Strip trailing whitespaces
We want to get rid of trailing whitespaces completly as they make just git
noice. Much better to start using automated tools to get rid of them once and
not getting them back again. This way git history will be cleaner and review
easier.
Commit was generated with:
pre-commit run --all-files trailing-whitespace
* format: Files should have exactly one new line end of them
It is good practice that every file has one new line. It is not now days so
mandatory but it also is not nice if file has lot of newlines end of it. We will
use pre-commit which takes automatically care about this so let's fix all.
Commit was generated with:
pre-commit run --all-files end-of-file-fixer
* format: Convert tabs to spaces
Project mostly use spaces over tabs. When mixing tabs and spaces this usually
makes formatting issues and also when changing those in commits it will make lot
of git noise. We will force spaces most of the time and use pre-commit to fix.
Commit was generated with:
pre-commit run --all-files remove-tabs
---------
Co-authored-by: Kari Argillander <kari.argillander@fidelix.com>
32 lines
1.5 KiB
Plaintext
32 lines
1.5 KiB
Plaintext
This port was done with the STM32 ARM Cortex-M3 STM32F103RGT6 on
|
||
a STM32 Discovery Kit using the STM32 CMSIS library and drivers
|
||
and IAR EWARM 6.10 compiler.
|
||
|
||
The CMSIS library was 21MiB compressed, so I didn't include it
|
||
as part of this project. The CMSIS and drivers
|
||
can be found by following the 'Click here for STM32
|
||
embedded firmware' link from the resources page:
|
||
http://www.st.com/stonline/stappl/resourceSelector/app?page=resourceSelector&doctype=FIRMWARE&SubClassID=1169
|
||
There will be a list of firmware resources.
|
||
The library you are looking for is in the
|
||
‘ARM-based 32-bit MCU STM32F10xxx standard peripheral library’.
|
||
Download the
|
||
‘ARM-based 32-bit MCU STM32F10xxx standard peripheral library’
|
||
and the CMSIS library can be found in
|
||
'…\STM32F10x_StdPeriph_Lib_V3.4.0\Libraries\CMSIS\CM3'.
|
||
Copy the contents of 'CMSIS' to the 'CMSIS' folder in this project.
|
||
and the drivers library can be found in
|
||
'…\STM32F10x_StdPeriph_Lib_V3.4.0\Libraries\STM32F10x_StdPeriph_Driver'.
|
||
Copy the contents of 'STM32F10x_StdPeriph_Driver' to the
|
||
'drivers' folder in this project.
|
||
|
||
The hardware interface only uses the USART and a peripheral pin
|
||
(RTS) for the MS/TP RS-485 interface, and the System Clock for
|
||
the millisecond timer.
|
||
|
||
It was created for the STM32 Design Challenge on March 20, 2011,
|
||
by Steve Karg. Although the design didn't win any awards,
|
||
it was one of the six finalists and was on display at the
|
||
STM booth at the 2010 Embedded Systems Conference West.
|
||
http://www.stm32challenge.com/
|