/**
 ******************************************************************************
 * @file    stm32f4xx_conf.h
 * @author  MCD Application Team
 * @version V1.0.0
 * @date    19-September-2011
 * @brief   Library configuration file.
 ******************************************************************************
 * @attention
 *
 * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
 * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
 * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
 * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
 * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
 * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
 *
 * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
 ******************************************************************************
 */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_CONF_H
#define __STM32F4xx_CONF_H

/* ########################## HSE/HSI Values adaptation ##################### */
/**
 * @brief Adjust the value of External High Speed oscillator (HSE) used in your
 * application. This value is used by the RCC HAL module to compute the system
 * frequency (when HSE is used as system clock source, directly or through the
 * PLL).
 */
#if !defined(HSE_VALUE)
#define HSE_VALUE \
    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */

#if !defined(HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT \
    ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */

/**
 * @brief Internal High Speed oscillator (HSI) value.
 *        This value is used by the RCC HAL module to compute the system
 * frequency (when HSI is used as system clock source, directly or through the
 * PLL).
 */
#if !defined(HSI_VALUE)
#define HSI_VALUE \
    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */

/**
 * @brief Internal Low Speed oscillator (LSI) value.
 */
#if !defined(LSI_VALUE)
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz \
                        The real value may vary depending on the variations  \
                        in voltage and temperature.*/
/**
 * @brief External Low Speed oscillator (LSE) value.
 */
#if !defined(LSE_VALUE)
#define LSE_VALUE                                                            \
    ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz \
                        */
#endif /* LSE_VALUE */

#if !defined(LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT \
    ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */

/**
 * @brief External clock source for I2S peripheral
 *        This value is used by the I2S HAL module to compute the I2S clock
 * source frequency, this source is inserted directly through I2S_CKIN pad.
 */
#if !defined(EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE \
    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */

/* Tip: To avoid modifying this file each time you need to use different HSE,
   ===  you can define the HSE value in your toolchain compiler preprocessor. */

/* ########################### System Configuration ######################### */
/**
 * @brief This is the HAL system configuration section
 */
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
#define DATA_CACHE_ENABLE 1U

/* Includes ------------------------------------------------------------------*/

#include "stm32f4xx_adc.h"
#include "stm32f4xx_can.h"
#include "stm32f4xx_crc.h"
#include "stm32f4xx_cryp.h"
#include "stm32f4xx_dac.h"
#include "stm32f4xx_dbgmcu.h"
#include "stm32f4xx_dcmi.h"
#include "stm32f4xx_dma.h"
#include "stm32f4xx_exti.h"
#include "stm32f4xx_flash.h"
#include "stm32f4xx_fsmc.h"
#include "stm32f4xx_hash.h"
#include "stm32f4xx_gpio.h"
#include "stm32f4xx_i2c.h"
#include "stm32f4xx_iwdg.h"
#include "stm32f4xx_pwr.h"
#include "stm32f4xx_rcc.h"
#include "stm32f4xx_rng.h"
#include "stm32f4xx_rtc.h"
#include "stm32f4xx_sdio.h"
#include "stm32f4xx_spi.h"
#include "stm32f4xx_syscfg.h"
#include "stm32f4xx_tim.h"
#include "stm32f4xx_usart.h"
#include "stm32f4xx_wwdg.h"
#include "stm32f4xx_misc.h"

/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/

/* If an external clock source is used, then the value of the following define
   should be set to the value of the external clock source, else, if no external
   clock is used, keep this define commented */
/*#define I2S_EXTERNAL_CLOCK_VAL   12288000 */ /* Value of the external clock in
                                                  Hz */

/* Uncomment the line below to expanse the "assert_param" macro in the
   Standard Peripheral Library drivers code */
/* #define USE_FULL_ASSERT    1 */

/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT

/**
 * @brief  The assert_param macro is used for function's parameters check.
 * @param  expr: If expr is false, it calls assert_failed function
 *   which reports the name of the source file and the source
 *   line number of the call that failed.
 *   If expr is true, it returns no value.
 * @retval None
 */
#define assert_param(expr) \
    ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t *file, uint32_t line);
#else
#define assert_param(expr) ((void)0)
#endif /* USE_FULL_ASSERT */

#endif /* __STM32F4xx_CONF_H */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/