Added BIG_ENDIAN define to all the unit tests so they would compile.

bacnet-stack/abort.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_ABORT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_ABORT -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/arf.mak

@@ -2,7 +2,7 @@
 CC      = gcc
 BASEDIR = .
 # -g for debugging with gdb
-DEFINES = -DBACFILE=1 -DBACDL_BIP=1 -DTEST -DTEST_ATOMIC_READ_FILE 
+DEFINES = -DBACFILE=1 -DBACDL_BIP=1 -DBIG_ENDIAN=0 -DTEST -DTEST_ATOMIC_READ_FILE 
 INCLUDES = -I. -Idemo/object -Itest 
 CFLAGS  = -Wall $(INCLUDES) $(DEFINES) -g
 

bacnet-stack/awf.mak

@@ -2,7 +2,7 @@
 CC      = gcc
 BASEDIR = .
 
-DEFINES = -DBACFILE=1 -DBACDL_BIP=1 -DTEST -DTEST_ATOMIC_WRITE_FILE 
+DEFINES = -DBACFILE=1 -DBACDL_BIP=1 -DBIG_ENDIAN=0 -DTEST -DTEST_ATOMIC_WRITE_FILE 
 INCLUDES = -I. -Idemo/object -Itest 
 CFLAGS  = -Wall $(INCLUDES) $(DEFINES) -g
 

bacnet-stack/bacapp.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_BACNET_APPLICATION_DATA -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_BACNET_APPLICATION_DATA -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/bacdcode.mak

@@ -1,7 +1,7 @@
 #Makefile to build unit tests
 CC      = gcc
 BASEDIR = .
-CFLAGS  = -Wall -I. -Itest -g -DTEST -DTEST_DECODE
+CFLAGS  = -Wall -I. -Itest -g -DBIG_ENDIAN=0 -DTEST -DTEST_DECODE
 
 TARGET = bacdcode
 

bacnet-stack/bacerror.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_BACERROR -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_BACERROR -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/dcc.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_DEVICE_COMMUNICATION_CONTROL -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_DEVICE_COMMUNICATION_CONTROL -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/demo/epics/main.c

@@ -57,7 +57,9 @@ static uint8_t Rx_Buf[MAX_MPDU] = { 0 };
 /* global variables used in this file */
 static uint32_t Target_Device_Object_Instance = BACNET_MAX_INSTANCE;
 static bool Error_Detected = false;
-static BACNET_ADDRESS Target_Address;
+static BACNET_ADDRESS Target_Address;
+/* use this parameter to set a special interface:
+   "eth0" on Linux, or dotted IP address on Windows */
 static char *Network_Interface = NULL;
 
 typedef struct BACnet_RP_Service_Data_t {
@@ -67,7 +69,8 @@ typedef struct BACnet_RP_Service_Data_t {
 } BACNET_RP_SERVICE_DATA;
 static BACNET_RP_SERVICE_DATA Read_Property_Data;
 
-static OS_Keylist Object_List;
+/* FIXME: keep the object list in here */
+/* static OS_Keylist Object_List; */
 
 static void MyErrorHandler(BACNET_ADDRESS * src,
     uint8_t invoke_id,
@@ -75,12 +78,12 @@ static void MyErrorHandler(BACNET_ADDRESS * src,
 {
     /* FIXME: verify src and invoke id */
     (void) src;
-    (void) invoke_id;
+    (void) invoke_id;
     #if 1
     printf("BACnet Error: %s: %s\r\n",
         bactext_error_class_name(error_class),
         bactext_error_code_name(error_code));
-    #else
+    #else
     (void) error_class;
     (void) error_code;
     #endif
@@ -93,12 +96,12 @@ void MyAbortHandler(BACNET_ADDRESS * src,
     /* FIXME: verify src and invoke id */
     (void) src;
     (void) invoke_id;
-    (void) server;
+    (void) server;
     #if 1
     printf("BACnet Abort: %s\r\n",
-        bactext_abort_reason_name(abort_reason));
+        bactext_abort_reason_name(abort_reason));
-    #else
+    #else
-    (void) abort_reason;
+    (void) abort_reason;
     #endif
     Error_Detected = true;
 }
@@ -108,12 +111,12 @@ void MyRejectHandler(BACNET_ADDRESS * src,
 {
     /* FIXME: verify src and invoke id */
     (void) src;
-    (void) invoke_id;
+    (void) invoke_id;
     #if 1
     printf("BACnet Reject: %s\r\n",
         bactext_reject_reason_name(reject_reason));
-    #else
+    #else
-    (void) reject_reason;
+    (void) reject_reason;
     #endif
     Error_Detected = true;
 }
@@ -268,48 +271,7 @@ static uint8_t Read_Properties(uint32_t device_instance)
     }
 
     return invoke_id;
-} 
+} 
-
-static void Interpret_Arguments(int argc, char *argv[])
-{
-    int i = 0, j = 0;           /* used to index through arguments */
-    char *p_arg = NULL;         /* points to current argument */
-    long number = 0;            /* used for strtol */
-    char *p_data = NULL;        /* points to data portion of argument */
-
-    if (!argv)
-        return;
-
-    /* skip 1st one [0] - its the command line for the filename */
-    for (i = 1; i < argc; i++) {
-        p_arg = argv[i];
-        if (p_arg[0] == '-') {
-            p_data = p_arg + 2;
-            switch (p_arg[1]) {
-            case 'a':
-                bip_set_addr(inet_addr(p_data));
-                break;
-            case 'd':
-                Network_Interface = p_data;
-                break;
-            /* double dash */
-            case '-':
-                if (strcmp(p_data, "help") == 0) {
-                    printf
-                        ("%s device-instance\r\n",
-                        filename_remove_path(argv[0]));
-                }
-                exit(1);
-                break;
-            default:
-                /* do nothing */
-                break;
-            }                   /* end of arguments beginning with - */
-        }                       /* dash arguments */
-    }                           /* end of arg loop */
-    return;
-}
-
 
 int main(int argc, char *argv[])
 {
@@ -324,14 +286,16 @@ int main(int argc, char *argv[])
     uint8_t invoke_id = 0;
     bool found = false;
 
+    /* FIXME: handle multi homed systems - use an argument passed to the datalink_init() */
+    
+    /* print help if not enough arguments */
     if (argc < 2) {
         printf
             ("%s device-instance\r\n",
             filename_remove_path(argv[0]));
         return 0;
     }
-    Interpret_Arguments(argc, argv);
+
-
     /* decode the command line parameters */
     Target_Device_Object_Instance = strtol(argv[1], NULL, 0);
     if (Target_Device_Object_Instance > BACNET_MAX_INSTANCE) {
@@ -342,7 +306,7 @@ int main(int argc, char *argv[])
     /* setup my info */
     Device_Set_Object_Instance_Number(BACNET_MAX_INSTANCE);
     address_init();
-    Init_Service_Handlers();
+    Init_Service_Handlers();
     datalink_init(Network_Interface);
     /* configure the timeout values */
     last_seconds = time(NULL);

bacnet-stack/demo/object/ai.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_ANALOG_INPUT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_ANALOG_INPUT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/ao.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_ANALOG_OUTPUT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_ANALOG_OUTPUT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/av.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_ANALOG_VALUE -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_ANALOG_VALUE -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/bi.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_BINARY_INPUT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_BINARY_INPUT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/bo.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_BINARY_OUTPUT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_BINARY_OUTPUT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/bv.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_BINARY_VALUE -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_BINARY_VALUE -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/device.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_DEVICE -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_DEVICE -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/lc.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_LOAD_CONTROL -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_LOAD_CONTROL -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/lo.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_LIGHTING_OUTPUT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_LIGHTING_OUTPUT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/lsp.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_LIFE_SAFETY_POINT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_LIFE_SAFETY_POINT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/demo/object/mso.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_MULTISTATE_OUTPUT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_MULTISTATE_OUTPUT -g
 
 # NOTE: this file is normally called by the unittest.sh from up directory
 SRCS = bacdcode.c \

bacnet-stack/iam.mak

@@ -2,7 +2,7 @@
 CC      = gcc
 BASEDIR = .
 # -g for debugging with gdb
-DEFINES = -DBACFILE=1 -DTEST -DTEST_IAM -DBACDL_TEST -DBIG_ENDIAN=0
+DEFINES = -DBACFILE=1 -DTEST -DBIG_ENDIAN=0 -DTEST_IAM -DBACDL_TEST
 INCLUDES = -I. -Idemo/object -Itest 
 CFLAGS  = -Wall $(INCLUDES) $(DEFINES) -g
 

bacnet-stack/ihave.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_I_HAVE -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_I_HAVE -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/npdu.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_NPDU -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_NPDU -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/rd.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_REINITIALIZE_DEVICE -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_REINITIALIZE_DEVICE -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/reject.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_REJECT -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_REJECT -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/rpm.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_READ_PROPERTY_MULTIPLE -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_READ_PROPERTY_MULTIPLE -g
 
 SRCS = bacdcode.c \
        bacerror.c \

bacnet-stack/timesync.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_TIMESYNC -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_TIMESYNC -g
 
 SRCS = bacapp.c \
        bacdcode.c \

bacnet-stack/whohas.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_WHOHAS -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_WHOHAS -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/whois.mak

@@ -4,7 +4,7 @@ BASEDIR = .
 #CFLAGS  = -Wall -I.
 # -g for debugging with gdb
 #CFLAGS  = -Wall -I. -g
-CFLAGS  = -Wall -I. -Itest -DTEST -DTEST_WHOIS -g
+CFLAGS  = -Wall -I. -Itest -DBIG_ENDIAN=0 -DTEST -DTEST_WHOIS -g
 
 SRCS = bacdcode.c \
        bacstr.c \

bacnet-stack/wp.mak

@@ -2,7 +2,7 @@
 CC      = gcc
 BASEDIR = .
 # -g for debugging with gdb
-DEFINES = -DBACFILE=1 -DBACDL_BIP=1 -DTEST -DTEST_WRITE_PROPERTY 
+DEFINES = -DBACFILE=1 -DBACDL_BIP=1 -DBIG_ENDIAN=0 -DTEST -DTEST_WRITE_PROPERTY 
 INCLUDES = -I. -Idemo/object -Itest 
 CFLAGS  = -Wall $(INCLUDES) $(DEFINES) -g