running the indent on the files.

bacnet-stack/ports/linux/rs485.c

@@ -40,60 +40,54 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include <stdio.h>
- 
+
 #include "mstp.h"
 
 // Transmits a Frame on the wire
-void RS485_Send_Frame(
-  struct mstp_port_struct_t *mstp_port, // port specific data
-  uint8_t *buffer, // frame to send (up to 501 bytes of data)
-  uint16_t nbytes) // number of bytes of data (up to 501)
+void RS485_Send_Frame(struct mstp_port_struct_t *mstp_port,     // port specific data
+    uint8_t * buffer,           // frame to send (up to 501 bytes of data)
+    uint16_t nbytes)            // number of bytes of data (up to 501)
 {
 
-  // in order to avoid line contention
-  while (mstp_port->Turn_Around_Waiting)
-  {
-    // wait, yield, or whatever
-  }
+    // in order to avoid line contention
+    while (mstp_port->Turn_Around_Waiting) {
+        // wait, yield, or whatever
+    }
 
-  // Disable the receiver, and enable the transmit line driver.
+    // Disable the receiver, and enable the transmit line driver.
 
-  while (nbytes)
-  {
-    putc(*buffer,stderr);
-    buffer++;
-    nbytes--;
-  }
+    while (nbytes) {
+        putc(*buffer, stderr);
+        buffer++;
+        nbytes--;
+    }
 
-  // Wait until the final stop bit of the most significant CRC octet 
-  // has been transmitted but not more than Tpostdrive.
+    // Wait until the final stop bit of the most significant CRC octet 
+    // has been transmitted but not more than Tpostdrive.
 
-  // Disable the transmit line driver.
+    // Disable the transmit line driver.
 
-  return;
+    return;
 }
 
 // called by timer, interrupt(?) or other thread
 void RS485_Check_UART_Data(struct mstp_port_struct_t *mstp_port)
 {
-  if (mstp_port->ReceiveError == true)
-  {
-    // wait for state machine to clear this
-  }
-  // wait for state machine to read from the DataRegister
-  else if (mstp_port->DataAvailable == false)
-  {
-    // check for data
+    if (mstp_port->ReceiveError == true) {
+        // wait for state machine to clear this
+    }
+    // wait for state machine to read from the DataRegister
+    else if (mstp_port->DataAvailable == false) {
+        // check for data
 
-    // if error,
-    // ReceiveError = TRUE;
-    // return;
+        // if error,
+        // ReceiveError = TRUE;
+        // return;
 
-    mstp_port->DataRegister = 0; // FIXME: Get this data from UART or buffer
+        mstp_port->DataRegister = 0;    // FIXME: Get this data from UART or buffer
 
-    // if data is ready,
-    // DataAvailable = TRUE;
-    // return;
-  }
+        // if data is ready,
+        // DataAvailable = TRUE;
+        // return;
+    }
 }
-