adjust root folder

Makefile

@@ -0,0 +1,130 @@
+# Main Makefile for BACnet-stack project with GCC
+
+# tools - only if you need them.
+# Most platforms have this already defined
+# CC = gcc
+# AR = ar
+# MAKE = make
+# SIZE = size
+#
+# Assumes rm and cp are available
+
+# configuration
+# If BACNET_DEFINES has not already been set, configure to your needs here
+MY_BACNET_DEFINES = -DPRINT_ENABLED=1
+MY_BACNET_DEFINES += -DBACAPP_ALL
+MY_BACNET_DEFINES += -DBACFILE
+MY_BACNET_DEFINES += -DINTRINSIC_REPORTING
+MY_BACNET_DEFINES += -DBACNET_TIME_MASTER
+MY_BACNET_DEFINES += -DBACNET_PROPERTY_LISTS=1
+MY_BACNET_DEFINES += -DBACNET_PROTOCOL_REVISION=17
+BACNET_DEFINES ?= $(MY_BACNET_DEFINES)
+
+# un-comment the next line to build in uci integration
+#BACNET_DEFINES += -DBAC_UCI
+#UCI_LIB_DIR ?= /usr/local/lib
+
+#BACDL_DEFINE=-DBACDL_ETHERNET=1
+#BACDL_DEFINE=-DBACDL_ARCNET=1
+#BACDL_DEFINE=-DBACDL_MSTP=1
+BACDL_DEFINE?=-DBACDL_BIP=1
+
+# Declare your level of BBMD support
+BBMD_DEFINE ?=-DBBMD_ENABLED=1
+#BBMD_DEFINE ?= -DBBMD_ENABLED=0
+#BBMD_DEFINE ?= -DBBMD_CLIENT_ENABLED
+
+# Passing parameters via command line
+MAKE_DEFINE ?=
+
+# Define WEAK_FUNC for [...somebody help here; I can't find any uses of it]
+DEFINES = $(BACNET_DEFINES) $(BACDL_DEFINE) $(BBMD_DEFINE) -DWEAK_FUNC=
+DEFINES += $(MAKE_DEFINE)
+
+# BACnet Ports Directory
+BACNET_PORT ?= linux
+
+# Default compiler settings
+OPTIMIZATION = -Os
+DEBUGGING =
+WARNINGS = -Wall -Wmissing-prototypes
+ifeq (${BUILD},debug)
+OPTIMIZATION = -O0
+DEBUGGING = -g -DDEBUG_ENABLED=1
+ifeq (${BACDL_DEFINE},-DBACDL_BIP=1)
+DEFINES += -DBIP_DEBUG
+endif
+endif
+CFLAGS  = $(WARNINGS) $(DEBUGGING) $(OPTIMIZATION) $(STANDARDS) $(INCLUDES) $(DEFINES)
+
+# Export the variables defined here to all subprocesses
+# (see http://www.gnu.org/software/automake/manual/make/Special-Targets.html)
+.EXPORT_ALL_VARIABLES:
+
+all: library demos router-ipv6 ${DEMO_LINUX}
+.PHONY : all library demos router gateway router-ipv6 clean
+
+library:
+	$(MAKE) -s -C lib all
+
+demos:
+	$(MAKE) -C demo all
+
+gateway:
+	$(MAKE) -B -s -C demo gateway
+
+server:
+	$(MAKE) -j -B -C demo server
+
+mstpcap:
+	$(MAKE) -B -C demo mstpcap
+
+mstpcrc: library
+	$(MAKE) -B -C demo mstpcrc
+
+iam:
+	$(MAKE) -B -C demo iam
+
+uevent:
+	$(MAKE) -B -C demo uevent
+
+writepropm:
+	$(MAKE) -s -B -C demo writepropm
+
+abort:
+	$(MAKE) -B -C demo abort
+
+error:
+	$(MAKE) -B -C demo error
+
+router: library
+	$(MAKE) -s -C demo router
+
+router-ipv6: library
+	$(MAKE) -B -s -C demo router-ipv6
+
+# Add "ports" to the build, if desired
+ports:	atmega168 bdk-atxx4-mstp at91sam7s stm32f10x
+	@echo "Built the ARM7 and AVR ports"
+
+atmega168: ports/atmega168/Makefile
+	$(MAKE) -s -C ports/atmega168 clean all
+
+at91sam7s: ports/at91sam7s/Makefile
+	$(MAKE) -s -C ports/at91sam7s clean all
+
+stm32f10x: ports/stm32f10x/Makefile
+	$(MAKE) -s -C ports/stm32f10x clean all
+
+mstpsnap: ports/linux/mstpsnap.mak
+	$(MAKE) -s -C ports/linux -f mstpsnap.mak clean all
+
+bdk-atxx4-mstp: ports/bdk-atxx4-mstp/Makefile
+	$(MAKE) -s -C ports/bdk-atxx4-mstp clean all
+
+clean:
+	$(MAKE) -s -C lib clean
+	$(MAKE) -s -C demo clean
+	$(MAKE) -s -C demo/router clean
+	$(MAKE) -s -C demo/router-ipv6 clean
+	$(MAKE) -s -C demo/gateway clean