From 593d518bc8864829d83df137633e370ef5651798 Mon Sep 17 00:00:00 2001 From: skarg Date: Fri, 11 Sep 2009 15:51:53 +0000 Subject: [PATCH] Fixed line end characters. --- bacnet-stack/demo/mstpcap/readme.txt | 54 ++++++++++++++-------------- 1 file changed, 27 insertions(+), 27 deletions(-) diff --git a/bacnet-stack/demo/mstpcap/readme.txt b/bacnet-stack/demo/mstpcap/readme.txt index a54bd59d..b9c76457 100644 --- a/bacnet-stack/demo/mstpcap/readme.txt +++ b/bacnet-stack/demo/mstpcap/readme.txt @@ -1,10 +1,10 @@ BACnet MS/TP Capture Tool This tool captures BACnet MS/TP packets on an RS485 serial interface, -and saves the packets to a file in Wireshark PCAP format for +and saves the packets to a file in Wireshark PCAP format for the BACnet MS/TP dissector to read. The filename has a date and time code in it, and will contain up to 65535 packets. A new file -will be created at each 65535 packet interval. The tool can +will be created at each 65535 packet interval. The tool can be stopped by using Control-C. Here is a sample of the tool running (use CTRL-C to quit). @@ -17,39 +17,39 @@ MAC MaxMstr Tokens Retries Treply Tusage Trpfm Tder Tpostpd 0 0 525 0 32 0 0 0 0 1 127 525 0 16 79 0 0 0 -The BACnet MS/TP capture tool also includes statistics which are -listed for any MAC addresses found passing a token, -or any MAC address replying to a DER message. +The BACnet MS/TP capture tool also includes statistics which are +listed for any MAC addresses found passing a token, +or any MAC address replying to a DER message. The statistics are emitted when Control-C is pressed, or when 65535 packets are captured and the new file is created. -The statistics are cleared when the new file is created. +The statistics are cleared when the new file is created. MaxMstr = highest destination MAC address during PFM - + Tokens = number of tokens transmitted by this MAC address. - + Retries = number of second tokens sent to this MAC address. - -Treply = maximum number of milliseconds it took to reply with -a token after receiving a token. Treply is required to be less -than 25ms (but the mstpcap tool may not have that good of -resolution on Windows). - -Tusage = the maximum number of milliseconds the -device waits for a ReplyToPollForMaster or Token retry. -Tusage is required to be between 20ms and 100ms. -Trpfm = maximum number of milliseconds to respond to PFM with RPFM. It is +Treply = maximum number of milliseconds it took to reply with +a token after receiving a token. Treply is required to be less +than 25ms (but the mstpcap tool may not have that good of +resolution on Windows). + +Tusage = the maximum number of milliseconds the +device waits for a ReplyToPollForMaster or Token retry. +Tusage is required to be between 20ms and 100ms. + +Trpfm = maximum number of milliseconds to respond to PFM with RPFM. It is required to be less than 25ms. - -Tder = maximum number of milliseconds that a device takes to -respond to a DataExpectingReply request. Tder is required to be less -than 250ms. -Tpostpd = maximum number of milliseconds to respond to -DataExpectingReply request with ReplyPostponed. Tpostpd is +Tder = maximum number of milliseconds that a device takes to +respond to a DataExpectingReply request. Tder is required to be less +than 250ms. + +Tpostpd = maximum number of milliseconds to respond to +DataExpectingReply request with ReplyPostponed. Tpostpd is required to be less than 250ms. -Note that the mstpcap tool may not have that good of -resolution on Windows, so timing under 50ms may not be accurate. - +Note that the mstpcap tool may not have that good of +resolution on Windows, so timing under 50ms may not be accurate. +