adding rtos-32 support

2005-04-22 17:53:19 +00:00
parent ba7e028795
commit 4c5d314f4a
7 changed files with 1167 additions and 0 deletions
@@ -0,0 +1,153 @@
+#
+# Simple makefile to build an RTB executable for RTOS-32
+#
+# This makefile assumes Borland bcc32 development environment
+# on Windows NT/9x/2000/XP
+#
+
+!ifndef RTOS32_DIR
+RTOS32_DIR_Not_Defined:
+   @echo .
+   @echo You must define environment variable RTOS32_DIR to for this build.
+!endif
+
+!ifndef BORLAND_DIR
+BORLAND_DIR_Not_Defined:
+   @echo .
+   @echo You must define environment variable BORLAND_DIR to compile
+!endif
+
+PRODUCT = bacnet
+PRODUCT_RTB = $(PRODUCT).rtb
+PRODUCT_EXE = $(PRODUCT).exe
+
+SRCS = init.c main.c ethernet.c \
+       ..\..\bacdcode.c \
+       ..\..\bigend.c \
+       ..\..\whois.c \
+       ..\..\iam.c \
+       ..\..\rp.c \
+       ..\..\device.c \
+       ..\..\abort.c \
+       ..\..\reject.c \
+       ..\..\bacerror.c \
+       ..\..\apdu.c \
+       ..\..\npdu.c
+
+OBJS = $(SRCS:.c=.obj)
+
+# Compiler definitions
+#
+CC = $(BORLAND_DIR)\bin\bcc32 +bcc32.cfg
+LINK = $(BORLAND_DIR)\bin\tlink32
+TLIB = $(BORLAND_DIR)\bin\tlib
+LOCATE = $(RTOS32_DIR)\bin\rtloc
+
+#
+# Include directories
+#
+CC_DIR     = $(BORLAND_DIR)\BIN
+CC_INCLDIR = $(BORLAND_DIR)\include
+INCL_DIRS = -I$(BORLAND_DIR)\include;$(RTOS32_DIR)\include
+DEFINES = -DDOC
+
+CFLAGS = $(INCL_DIRS) $(CS_FLAGS) $(DEFINES)
+
+# Libraries
+#
+RTOS32_LIB_DIR = $(RTOS32_DIR)\libbc
+C_LIB_DIR = $(BORLAND_DIR)\lib
+
+LIBDIR = $(RTOS32_LIB_DIR);$(C_LIB_DIR)
+
+LIBS = $(RTOS32_LIB_DIR)\RTFILES.LIB \
+$(RTOS32_LIB_DIR)\RTFSK32.LIB \
+$(RTOS32_LIB_DIR)\DRVDOC.LIB \
+$(RTOS32_LIB_DIR)\RTIP.LIB \
+$(RTOS32_LIB_DIR)\RTK32.LIB \
+$(RTOS32_LIB_DIR)\FLTEMUMT.LIB \
+$(RTOS32_LIB_DIR)\DRVRT32.LIB \
+$(RTOS32_LIB_DIR)\RTEMUMT.LIB \
+$(RTOS32_LIB_DIR)\RTT32.LIB \
+$(RTOS32_LIB_DIR)\RTTHEAP.LIB \
+$(C_LIB_DIR)\DPMI32.lib \
+$(C_LIB_DIR)\IMPORT32.lib \
+$(C_LIB_DIR)\CW32MT.lib
+
+#
+# Main target
+#
+# This should be the first one in the makefile
+
+all : $(PRODUCT_RTB) monitor.rtb
+
+monitor.rtb: monitor.cfg hardware.cfg
+  $(LOCATE) monitor
+
+# debug using COM3 (ISA Card) as the debug port
+# boot from floppy
+debugcom3: hardware.cfg software.cfg $(PRODUCT_RTB) monitor.rtb
+  $(LOCATE) -DDEBUGCOM3 monitor
+  $(LOCATE) -d- -DMONITOR -DDEBUGCOM3 $(PRODUCT) software.cfg
+
+$(PRODUCT_RTB): bcc32.cfg hardware.cfg software.cfg $(PRODUCT_EXE)
+		@echo Running Locate on $(PRODUCT)
+	  $(LOCATE) $(PRODUCT) software.cfg
+
+# Linker specific: the link below is for BCC linker/compiler. If you link
+# with a different linker - please change accordingly.
+#
+
+# need a temp response file (@&&) because command line is too long
+$(PRODUCT_EXE) : $(OBJS)
+	@echo Running Linker for $(PRODUCT_EXE)
+	$(LINK) -L$(LINKER_LIB) -m -c -s -v @&&| # temp response file, starts with |
+	  $(BORLAND_DIR)\lib\c0x32.obj $**  # $** lists each dependency
+	$<
+	$*.map
+	$(LIBS)
+| # end of temp response file
+
+#
+# Utilities
+
+clean :
+	@echo Deleting obj files, $(PRODUCT_EXE), $(PRODUCT_RTB) and map files.
+	del *.obj
+	del $(PRODUCT_EXE)
+	del $(PRODUCT_RTB)
+	del *.map
+	del bcc32.cfg
+
+install : $(PRODUCT)
+	copy $(PRODUCT) ..\bin
+
+#
+# Generic rules
+#
+.SUFFIXES: .cpp .c .sbr .obj
+
+#
+# cc generic rule
+#
+.c.obj:
+	@echo Compiling $@ from $<
+	$(CC) $(CFLAGS) -c -o$@ $<
+
+# Compiler configuration file
+bcc32.cfg :
+   Copy &&|
+-y     #include line numbers in OBJ's
+-v     #include debug info
+-w+    #turn on all warnings
+-Od    #disable all optimizations
+#-a4    #32 bit data alignment
+#-M     # generate link map
+#-ls    # linker options
+#-WM-   #not multithread
+-WM    #multithread
+-w-aus # ignore warning assigned a value that is never used
+-w-sig # ignore warning conversion may lose sig digits
+| $@
+
+# EOF: makefile