Add MSTP port to nucleof429zi using DFR0259 RS485 shield (#136)
Co-authored-by: Steve Karg <skarg@users.sourceforge.net>
This commit is contained in:
Steve Karg
@@ -0,0 +1,153 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.0.0
|
||||
* @date 19-September-2011
|
||||
* @brief Library configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
||||
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
||||
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
||||
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_CONF_H
|
||||
#define __STM32F4xx_CONF_H
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "stm32f4xx_adc.h"
|
||||
#include "stm32f4xx_can.h"
|
||||
#include "stm32f4xx_crc.h"
|
||||
#include "stm32f4xx_cryp.h"
|
||||
#include "stm32f4xx_dac.h"
|
||||
#include "stm32f4xx_dbgmcu.h"
|
||||
#include "stm32f4xx_dcmi.h"
|
||||
#include "stm32f4xx_dma.h"
|
||||
#include "stm32f4xx_exti.h"
|
||||
#include "stm32f4xx_flash.h"
|
||||
#include "stm32f4xx_fsmc.h"
|
||||
#include "stm32f4xx_hash.h"
|
||||
#include "stm32f4xx_gpio.h"
|
||||
#include "stm32f4xx_i2c.h"
|
||||
#include "stm32f4xx_iwdg.h"
|
||||
#include "stm32f4xx_pwr.h"
|
||||
#include "stm32f4xx_rcc.h"
|
||||
#include "stm32f4xx_rng.h"
|
||||
#include "stm32f4xx_rtc.h"
|
||||
#include "stm32f4xx_sdio.h"
|
||||
#include "stm32f4xx_spi.h"
|
||||
#include "stm32f4xx_syscfg.h"
|
||||
#include "stm32f4xx_tim.h"
|
||||
#include "stm32f4xx_usart.h"
|
||||
#include "stm32f4xx_wwdg.h"
|
||||
#include "stm32f4xx_misc.h"
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* If an external clock source is used, then the value of the following define
|
||||
should be set to the value of the external clock source, else, if no external
|
||||
clock is used, keep this define commented */
|
||||
/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */
|
||||
|
||||
|
||||
/* Uncomment the line below to expanse the "assert_param" macro in the
|
||||
Standard Peripheral Library drivers code */
|
||||
/* #define USE_FULL_ASSERT 1 */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#endif /* __STM32F4xx_CONF_H */
|
||||
|
||||
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user